![](/html/c9/c976/c976228571af28eedbd209bc270d45a41c08b34408b7f702269a35dfb93f5174/bg1.png)
Product Information Packet
CJL3515A
2HP,3450RPM,1PH,60HZ,3535L,N
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
![](/html/c9/c976/c976228571af28eedbd209bc270d45a41c08b34408b7f702269a35dfb93f5174/bg2.png)
Product Information Packet: CJL3515A - 2HP,3450RPM,1PH,60HZ,3535L,N
Part Detail
Revision: M Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WG5184 CD Diagram: CD0449 Mfg Plant:
Mech. Spec: 35Z185 Layout: 35LYZ185 Poles: 02 Created Date: 10-29-2010
Base: RG Eff. Date: 07-30-2020 Leads: 4#14 A&J,1#12 #4TH
Specs
Catalog Number: CJL3515A
Enclosure: TEFC
Frame: 56J
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 14 AWG, A&J
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3535L
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Current @ Voltage: 11.500 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 9
![](/html/c9/c976/c976228571af28eedbd209bc270d45a41c08b34408b7f702269a35dfb93f5174/bg3.png)
Product Information Packet: CJL3515A - 2HP,3450RPM,1PH,60HZ,3535L,N
12.100 A @ 208.0 V
23.000 A @ 115.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Rotation: Fixed Opposite Standard
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
Page 3 of 9