Baldor CFSWDL3506 Product Information Sheet

Product Information Packet

CFSWDL3506

.75HP,3450RPM,1PH,60HZ,56C,3516L,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CFSWDL3506 - .75HP,3450RPM,1PH,60HZ,56C,3516L,TEFC,F1

Part Detail

Revision: D Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGL342 CD Diagram: CD0648 Mfg Plant:
Mech. Spec: 35E4732 Layout: 35LYE4732 Poles: 02 Created Date: 07-21-2017
Base: RG Eff. Date: 06-25-2018 Leads: 7#18 15" lead length,0#0 dbl dip & bake,0#0 CD0648 & CS0Y

Specs

Catalog Number: CFSWDL3506
Enclosure: TEFC
Frame: 56C
Frame Material: Stainless Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Finish: UNPAINTED
Motor Lead Quantity/Wire Size: @ AWG

7 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3516L
Mounting Arrangement: F1
Power Factor: 81
Product Family: WD All SD Non-Encapsulated
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None

Current @ Voltage: 4.600 A @ 230.0 V

RoHS Status: ROHS COMPLIANT

Page 2 of 10

Product Information Packet: CFSWDL3506 - .75HP,3450RPM,1PH,60HZ,56C,3516L,TEFC,F1

4.800 A @ 208.0 V

9.200 A @ 115.0 V
Design Code: N
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10