Baldor CESSWDM3611T-5 Product Information Sheet
Product Information Packet
CESSWDM3611T-5
3HP,1760RPM,3PH,60HZ,182TC,3636M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: CESSWDM3611T-5 - 3HP,1760RPM,3PH,60HZ,182TC,3636M,TEFC,F1
Part Detail
Revision: G Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGR715 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 36L738 Layout: 36LYL738 Poles: 04 Created Date: 05-18-2016
Base: RG Eff. Date: 08-12-2019 Leads: 3#16
Specs
Catalog Number: CESSWDM3611T-5
Enclosure: TEFC
Frame: 182TC
Frame Material: Stainless Steel
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 3.190 A @ 575.0 V
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3636M
Mounting Arrangement: F1
Power Factor: 76
Product Family: Wash Down All Stainless Steel
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Design Code: B
Shaft Rotation: Reversible
Page 2 of 9
Product Information Packet: CESSWDM3611T-5 - 3HP,1760RPM,3PH,60HZ,182TC,3636M,TEFC,F1
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 9
Loading...