Baldor CESSWDM3545 Product Information Sheet

Product Information Packet

CESSWDM3545

1HP,3450RPM,3PH,60HZ,56C,3520M,TENV,F1,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CESSWDM3545 - 1HP,3450RPM,3PH,60HZ,56C,3520M,TENV,F1,N

Part Detail

Revision: P Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGL314 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35V814 Layout: 35LYV814 Poles: 02 Created Date: 05-20-2015
Base: RG Eff. Date: 08-12-2019 Leads: 9#18

Specs

Catalog Number: CESSWDM3545
Enclosure: TENV
Frame: 56C
Frame Material: Stainless Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: N
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Finish: UNPAINTED
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3520M
Mounting Arrangement: F1
Power Factor: 82
Product Family: Wash Down All Stainless Steel
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 1.400 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 8

Product Information Packet: CESSWDM3545 - 1HP,3450RPM,3PH,60HZ,56C,3520M,TENV,F1,N

2.800 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 8