Baldor CEM7067T-I-5 Product Information Sheet

Product Information Packet

CEM7067T-I-5

40HP,3540RPM,3PH,60HZ,324TSC,1252M,XPFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CEM7067T-I-5 - 40HP,3540RPM,3PH,60HZ,324TSC,1252M,XPFC

Part Detail

Revision: K Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 12WGY734 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 12F665 Layout: 12LYF665 Poles: 02 Created Date: 11-21-2013
Base: RG Eff. Date: 03-09-2020 Leads: 3#10

Specs

Catalog Number: CEM7067T-I-5
Enclosure: XPFC
Frame: 324TSC
Frame Material: Iron
Output @ Frequency: 40.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Class and Group: CLI GP C,D
XP Division: Division I
Agency Approvals: UL

UR
CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 10 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X1252M
Mounting Arrangement: F1
Power Factor: 88
Product Family: Hazardous Location Motor
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Blower: None

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: CEM7067T-I-5 - 40HP,3540RPM,3PH,60HZ,324TSC,1252M,XPFC

Current @ Voltage: 36.000 A @ 575.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10