Baldor CEM7040T-I Product Information Sheet

Product Information Packet

CEM7040T-I

5//3HP,1165//975RPM,3PH,60//50HZ,215TC,3

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: CEM7040T-I - 5//3HP,1165//975RPM,3PH,60//50HZ,215TC,3

Part Detail

Revision: A Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGQ067 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37M353 Layout: 37LYM353 Poles: 06 Created Date: 09-22-2017
Base: RG Eff. Date: 07-19-2019 Leads: 9#14 Y

Specs

Catalog Number: CEM7040T-I
Enclosure: XPFC
Frame: 215TC
Frame Material: Steel
Output @ Frequency: 3.000 HP @ 50 HZ

5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

190.0 V @ 50 HZ

460.0 V @ 60 HZ

380.0 V @ 50 HZ
XP Class and Group: CLI GP C,D
XP Division: Division I
Agency Approvals: CSA

CSA EEV
UR

Auxillary Box: No Auxillary Box

Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3752M
Mounting Arrangement: F1
Power Factor: 71
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard

Auxillary Box Lead Termination: None

Rodent Screen: None

Page 2 of 9

Product Information Packet: CEM7040T-I - 5//3HP,1165//975RPM,3PH,60//50HZ,215TC,3

Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 7.200 A @ 460.0 V

5.900 A @ 380.0 V

15.600 A @ 208.0 V

14.400 A @ 230.0 V

11.900 A @ 190.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard

RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 9