Baldor 35J710X945 Product Information Sheet

Product Information Packet

35J710X945

1HP,1725RPM,1PH,60HZ,56YZ,3524L,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 35J710X945 - 1HP,1725RPM,1PH,60HZ,56YZ,3524L,TEFC,F1

Part Detail

Revision: AF Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGX945 CD Diagram: CD0001 Mfg Plant:
Mech. Spec: 35J710 Layout: 35LYJ710 Poles: 04 Created Date:
Base: RG Eff. Date: 03-09-2020 Leads: 6#18

Specs

Enclosure: TEFC
Frame: 56YZ
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 7.000 A @ 208.0 V

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3524L
Mounting Arrangement: F1
Power Factor: 73
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: 4-Bolt Pump Mount
Pulley Shaft Indicator: Tang
Rodent Screen: None
Shaft Extension Location: Pulley End

6.400 A @ 230.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 12

Product Information Packet: 35J710X945 - 1HP,1725RPM,1PH,60HZ,56YZ,3524L,TEFC,F1

12.800 A @ 115.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 12

Product Information Packet: 35J710X945 - 1HP,1725RPM,1PH,60HZ,56YZ,3524L,TEFC,F1

Nameplate NP1256L

CAT.NO.

SPEC. 35J710X945

HP 1

VOLTS 115/230

AMP 12.8/6.4
RPM 1725

FRAME 56YZ HZ 60 PH 1

SER.F. 1.15 CODE K DES L CLASS B

NEMA-NOM-EFF 67 PF 73

RATING 40C AMB-CONT

CC USABLE AT 208V 7
DE 6203 ODE 6203

ENCL TEFC SN

Page 4 of 12