Baldor 35E1470Y518 Product Information Sheet
Product Information Packet
35E1470Y518
.5HP,850RPM,1PH,60HZ,56Z,3546L,TEFC,F1,N
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: 35E1470Y518 - .5HP,850RPM,1PH,60HZ,56Z,3546L,TEFC,F1,N
Part Detail
Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY518 CD Diagram: CD0001 Mfg Plant:
Mech. Spec: 35E1470 Layout: 35LYE1470 Poles: 08 Created Date: 08-15-2012
Base: RG Eff. Date: 07-27-2020 Leads: 6#18
Specs
Enclosure: TEFC
Frame: 56Z
Frame Material: Steel
Output @ Frequency: .500 HP @ 60 HZ
Synchronous Speed @ Frequency: 900 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 11.600 A @ 115.0 V
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3546L
Mounting Arrangement: F1
Power Factor: 53
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
5.800 A @ 230.0 V
Shaft Rotation: Reversible
Page 2 of 9
Product Information Packet: 35E1470Y518 - .5HP,850RPM,1PH,60HZ,56Z,3546L,TEFC,F1,N
Design Code: Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 9
Loading...