Baldor 34L663X869G1 Product Information Sheet

Product Information Packet

34L663X869G1

.33HP,1725RPM,1PH,60HZ,48YZ,3414S,ODP,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 34L663X869G1 - .33HP,1725RPM,1PH,60HZ,48YZ,3414S,ODP,F1

Part Detail

Revision: L Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGX869 CD Diagram: CD1215 Mfg Plant:
Mech. Spec: 34L663 Layout: 34LYL663 Poles: 04 Created Date: 09-27-2010
Base: RG Eff. Date: 02-11-2019 Leads: 2#16 A PH,3#18 B&J

Specs

Enclosure: ODP
Frame: 48YZ
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 5.600 A @ 115.0 V
Design Code: -

Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 16 AWG, A PH
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 3414S
Mounting Arrangement: F1
Power Factor: 66
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: 4-Bolt Pump Mount
Pulley Shaft Indicator: Tang
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible

Drip Cover: No Drip Cover

Shaft Slinger Indicator: No Slinger

Page 2 of 9

Product Information Packet: 34L663X869G1 - .33HP,1725RPM,1PH,60HZ,48YZ,3414S,ODP,F1

Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H
Inverter Code: Not Inverter
KVA Code: R

Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: EP
Winding Thermal 2: None

Page 3 of 9