Baldor 34H505X521G1 Product Information Sheet

Product Information Packet

34H505X521G1

.56KW,3350RPM,1PH,60HZ,D71C,3424C,TEFC,B

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 34H505X521G1 - .56KW,3350RPM,1PH,60HZ,D71C,3424C,TEFC,B

Part Detail

Revision: B Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGX521 CD Diagram: CD0042 Mfg Plant:
Mech. Spec: 34H505 Layout: 34LYH505 Poles: 02 Created Date: 04-26-2017
Base: N Eff. Date: 01-29-2020 Leads: 3#16

Specs

Enclosure: TEFC
Frame: D71C
Frame Material: Steel
Output @ Frequency: .560 KW @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 8.100 A @ 115.0 V
Design Code: -

KVA Code: D
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3424C
Mounting Arrangement: B14
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible

Drip Cover: No Drip Cover

Shaft Slinger Indicator: No Slinger

Page 2 of 9

Product Information Packet: 34H505X521G1 - .56KW,3350RPM,1PH,60HZ,D71C,3424C,TEFC,B

Duty Rating: 15 MIN
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter

Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 9