Baldor 33-1079-1002 Product Information Sheet
Product Information Packet
33-1079-1002
1.5HP,3450RPM,3PH,60HZ,42YZ,3328M,TENV,F
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: 33-1079-1002 - 1.5HP,3450RPM,3PH,60HZ,42YZ,3328M,TENV,F
Part Detail
Revision: AE Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 33WG1002 CD Diagram: CD0005A05 Mfg Plant:
Mech. Spec: 33-1079 Layout: 33LY1079 Poles: 02 Created Date: 06-25-2007
Base: RG Eff. Date: 09-11-2019 Leads: 9#18
Specs
Enclosure: TENV
Frame: 42YZ
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
208.0 V @ 60 HZ
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 2.400 A @ 460.0 V
4.800 A @ 230.0 V
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3328M
Mounting Arrangement: F1
Power Factor: 83
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: 4-Bolt Pump Mount
Pulley Shaft Indicator: Tang
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
5.300 A @ 208.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 10
Product Information Packet: 33-1079-1002 - 1.5HP,3450RPM,3PH,60HZ,42YZ,3328M,TENV,F
Design Code: D
Drip Cover: No Drip Cover
Duty Rating: 5 MIN
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Feedback Signal: NONE
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...