Baldor 06F363W352 Product Information Sheet

Product Information Packet

06F363W352

5HP,1750RPM,3PH,60HZ,184TZ,0640M,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: 06F363W352 - 5HP,1750RPM,3PH,60HZ,184TZ,0640M,TEFC,F1

Part Detail

Revision: R Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 06WGW352 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 06F363 Layout: 06LYF363 Poles: 04 Created Date:
Base: RG Eff. Date: 01-23-2020 Leads: 9#16

Specs

Enclosure: TEFC
Frame: 184TZ
Frame Material: Iron
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA

CSA EEV
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0640M
Mounting Arrangement: F1
Power Factor: 80
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: 06F363W352 - 5HP,1750RPM,3PH,60HZ,184TZ,0640M,TEFC,F1

Current @ Voltage: 6.500 A @ 460.0 V

13.800 A @ 208.0 V

13.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10