BakkerElkhuizen UltraStand User Manual

Work Smart - Feel Good

UltraStand

Notebook stand

WARNING:

After removing the cover sheet
from the UltraStand laptop holder,
immediately attach it to your laptop!

First ensure that the back of the

laptop is clean and grease-free (using,
for example, a screen cloth).

1 Lay your laptop with the bottom facing

up and the front facing you.

2 Carefully remove the cover sheet from

the UltraStand.

3 Ensure that the UltraStand is facing

you with the adjusting tongue pointing
towards you.

1

2

3

4 Attach the UltraStand to the laptop

using the reference points that
correspond with the rear legs of your
laptop.

5 Rub the sticky sheet on the sides with

your ngertips (not your ngernails)
and press the sticky pad down rmly in

the middle. Ensure that the UltraStand
lines up properly everywhere.

6 After 24 hours, the bond is at full

strength and the UltraStand is ready
for use.

Keep the cover sheet. You can stick the
UltraStand to this, when you temporarily remove
it to service your laptop. Exposing the UltraStand
to the air must be kept to a minimum to prevent
drying out.

4

5

6

Go to www.bakkerelkhuizen.com/ultrastand for
a video instruction for attaching and detaching
the UltraStand.

24h

www.bakkerelkhuizen.com