Quick guide / User Manual
S-Board 860 Bluetooth
Rechargeable Keyboard
S-Board 860 Bluetooth Rechargeable Keyboard
Installation:
1. Install the two AA A
rechargeable batteries.
2. Slide the power switch
to ON position.
3. Press the pair (ID)
button on the bottom
side of the keyboard
for 3 seconds; the
green LED on the
top will ash when
in pairing mode.
4. The keyboard is now
ready to connect
with a Bluetooth
ready system:
Note:
If no signal is received
within 30 sec, the
keyboard will revert to
Power-saving Mode.
To reactivate the
keyboard, click any
key on the keyboard.
1 Make sure that the Bluetooth
Function has been activated
on your computer. Double
click the Bluetooth Icon in
the Task Bar or in the Control
Windows
Panel. Click ‘Add a device’
1 Make sure that the Bluetooth
Function has been activated
on your computer. Select
Set up Bluetooth device
Mac
from the Bluetooth status
dropdown in the menu bar.
1 On your iPad/iPhone,
go to Settings then
select General.
iPad / iPhone
1 On your tablet, go to
Settings then select
Wireless and Network,
then Bluetooth
Settings.
Android Tablet
2 In the Bluetooth program, use
the option to add a new device
and follow the instructions
on the screen. A random
Bluetooth passkey will be
provided by your system.
2 When the system finds the
keyboard, select Bluetooth
Keyboard and click Continue.
2 Turn Bluetooth ON, it
will start searching for
Bluetooth devices.
2 Turn Bluetooth ON and
select Scan Devices, it
will start searching for
Bluetooth devices.
3 IMPORTANT: Press ENTER
after typing the passkey on
each device.
3 A random Bluetooth passkey
will be provided by your
system. Type the Bluetooth
passkey onto the keyboard,
and press Enter to complete
the pairing.
3 When the system finds
the keyboard, select
Bluetooth Keyboard.
3 When the system finds
the keyboard, select
Bluetooth Keyboard.
4 A random Bluetooth
passkey or pin will
be provided by your
system. Type this
number onto the
keyboard, and press
Enter to complete the
pairing.
4 A random Bluetooth
passkey or pin will
be provided by your
system. Type this
number onto the
keyboard, and press
Enter to complete the
pairing.
4 Setup of your device is
complete.
4 Click Quit. Now your wireless
Bluetooth keyboard is
successfully connected with
your computer.
5 Now the keyboard is
successfully connected
with your iDevice.
5 Now the keyboard is
successfully connected
with the Android Tablet.
LED function description:
LED function type.
Num lock
Caps lock LED/ID pairing
Green: Battery charge
Red: Battery low
How to charge the batteries
When the battery power is low, the Battery
low LED will ash and turn red. Use the
Micro USB retractable cable to connect to
an USB port of your computer to charge
the batteries. During charging in process,
you can continue using the keyboard.
Note: this Micro USB connector
is only for charging batteries use,
there is no data link function.
Specications:
• 82/83 keys compact and ergonomic layout
• Fn function key with 10 internet/media
keys and numeric pad function
• Power saving mode design
• Excellent tactile feel scissors key switch
• Provide Num Lock; Caps Lock; battery power low LED indicators
• Simply use cable connecting to computer’s
USB port to recharge batteries
• Working range: 10 meter
• Windows Mobile OS 6.0 & later
System requirements: Built-in Bluetooth
functionality on any of the following systems:
• Computers with Windows, Mac OS
• Apple iPad, iPhone/Touch with iOS 4 & later
• Android tablets (Xoom, Galaxy Tab)
For more information and user manuals in other
languages go to our website: www.bakkerelkhuizen.com
www.bakkerelkhuizen.com
THIS D EVICE COM PLIES WITH PART 15 OF T HE FCC RULES. OPERATI ON IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DE VICE MAY NOT C AUSE H ARM FUL INTERFERENCE AN D
(2) THI S DEV ICE MUST ACCEPT ANY INT ERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits
for Class B Digital D evice, purs uant to p art 15 of th e FCC Rules. Th ese
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to tr y to
correct the interference by one or more of the following measures:
· Reorient of relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit dierent
from th at to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
THE CH ANG ES OR M ODIFICATIONS NOT EX PRE SSLY APPROVED
BY THE PARTY R ESPONS IBLE FOR COM PLIANCE COULD VO ID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device compli es with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful in terference, and receiver.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits
set forth for uncontrolled equipment and meets the FCC radio
frequ ency (RF) Exposure Guidelines in Supplement C to OET65 .
The equipment has very low levels of RF energy th at it is deemed
to comply with out testing of specic absorption ra tio (S AR).
Loading...