VG16
Removal of components for general cleaning purposes.
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
The fat collection trays simply slide out
The fat collection trays simply slide out
and must be emptied after every cook.
and must be emptied after every cook.
These items must be replaced before using the oven.These items must be replaced before using the oven.
THE COMBINATION OF FACTS DATA
WHICH MA
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY
Y BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
To remove the discs from the central
shaft, simply unscrew the retaining nut
that releases the disc for removal.
The shaft and disc assemblies:
Both of the discs and the shaft must be
removed from the oven for cleaning.
THE COMBIN DATA & ASSEMBLY DATA
ATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATUR
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSIO
ALL RIGHTS ARE RESERVED.
NOTICE:
E TO BKI.
N FROM BKI.
Replace items before using the oven.
Replacement is a reversal of the above procedure.
To remove the discs, withdraw
from the drive pins and slide off
the shaft, the shaft passing
through the slot provided.
Remove the central
shaft by lifting and
withdrawing from
the drive coupling.
THE COMBINATION OF FACTS & ASSEMBLY DATA
WHICH MA I.
THESE MATERI N FROM BKI.
, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA
Y BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BK
ALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSIO
ALL RIGHTS ARE RESERVED.
NOTICE:
IMPORTANT:IMPORTANT:
BEFORE CARRYING OUT THE NEXT STAGE, THE OVEN MUST BE ISOLATED FROM THE
ELECTRICAL SUPPLY BY WITHDRAWING THE MAINS PLUG.
The Fan Guards form an integral part of the oven lining & as such, it is
essential to replace these panels before re-connecting the electrical supply.
The fan guard should be removed and cleaned along with the discs and shaft.
To remove a fan guard:
Press as shown at both
ends and pull down to
unclip from the retaining
slots.
THE COMBIN ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
ATION OF FACTS, DATA, DESIGN ELEMENTS,
WHICH MAY BE CONTAINED
THESE MATERIALS ARE NOT TO BE USED OR
IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
The Element Covers form an integral part of the oven lining & as such, it is The Element Covers form an integral part of the oven lining & as such, it is
essential to replace these panels before re-connecting the electrical supply.
To remove an element
cover, unscrew the four
retaining nuts.
Swing down the cover and
unhook from the rear pins.
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
Element cover removed,
showing the rear pins.
… And slide the cover
out from the oven cavity.
THE COMBINATION OF FACTS, DATA, DE & ASSEMBLY DATA
WHICH MAY BE CONTAINED I.
THESE MATERIALS AR N FROM BKI.
E NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSIO
SIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA
IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BK
ALL RIGHTS ARE RESERVED.
NOTICE:
Loading...