Bakers Pride Oven 16-C, VG8-C User Manual
VECTO GRILL
VISUAL DISPLAY ROTARY OVENS
MODELS VG8/C & 16/C
Electronic Control
OPERATING INSTRUCTIONS
1
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
CONTENTS
SECTION PAGE
INTRODUCTION 3
ACCESSORIES, AND HOW TO USE THEM 4
THE CONTROLS 5 - 7
PROGRAMMING 8 – 10
OPERATING 11 - 12
OPERATING OVERVIEW 13
DO`S & DON’T`S 14
DAILY CLEANING SCHEDULE 15
THE “VECTO GRILL” OVEN IS MANUFACTURED ACCORDING TO THE
FOLLOWING STANDARD: - BS EN 60335-2-42:2000
NOTICE:
NOTE: - THE THERMAL CUT-OUT WILL NOT RESET AUTOMATICALLLY.
SAFETY CUT OUT
For added safety, all “VECTO GRILL” ovens have a built in thermal cut-out to
protect against over-heating through component failure or incorrect use.
If for any reason the thermal cut-out operates, the oven will automatically shut down
and should be switched “off” & disconnected from the mains and allowed to cool.
The oven must not be reused until it has been checked by a qualified electrician or a
BKI appointed service agent.
2
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
YOUR NEW VECTO GRILL
BKI is justly proud of its international reputation as a leader in the catering equipment field. Our
name on this oven assures you of the finest designs and engineering.
With the Vecto Grill, we offer the latest technology in the speed of cook, the control of temperature
and the efficient and economical use of electricity. It has been built and designed with care and
dedication to give you many years of quality cooking and dependability to ensure the highest return
on your investment.
When located and used as it is intended, it is a silent salesman, merchandising your product to its
fullest advantage.
Read these instructions carefully, familiarise yourself with the controls and cooking instructions and
look after it well….
…. it will always be an asset to your business.
UNPACKING & SETTING UP
Your “Vectogrill” oven has been completely assembled and tested before despatch. It has been
packed for safe shipment to your premises. Meat-forks and other accessories may have been packed
separately, check all parts and accessories against the delivery note.
Before connecting to the power supply, ensure that all fittings and packaging have been removed.
ELECTRICAL SUPPLY
Because of the high output of the Vecto Grill, it is essential that a qualified electrician connects it to
the correct power supply
This appliance must be installed by a qualified electrician, in accordance with the latest edition of
the I.E.E Wiring Regulations.
An electrical rating plate is located on each oven. (See Installation Instructions).
Our warranty is only effective if connected to the correct power supply by a suitably qualified
person.
WARNING – THIS APPLIANCE MUST BE EARTHED
.
3
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
ACCESSORIES…
AND HOW TO USE THEM
STANDARD MEATFORKS
These are ideal for chicken and poultry fold wings to back, place on back with cavity away from
you. Run pointed ends of meat fork through sides of chicken under wings and through thighs (breast
up and legs down). Ensure that legs of adjacent birds DO NOT PRESS TIGHTLY TOGETHER,
this will cause the area of contact to be under-cooked!
Load the meat-forks:
Hold the meat-fork with the handle to the right–hand side, facing up
Stop rotor disc using the rotation switch
Open the oven door
Place the pointed ends of the meat-fork into the left-hand disc holes
Push the meat-fork into the disc to allow the right-hand (handle end) pins locate into the right-hand
disc.
Be sure to adjust the meat-fork position so that the handle end locates firmly in the spit groove.
BASKETS
Baskets can be used for large chickens or other meats.
After loading, simply locate pins in the holes on the discs.
BAKING TRAYS
Baking trays are available for pies and other pastry products.
4
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
The Controls.
Vecto-Grill Ovens with Multi - Program Controller.
Display Area
Function Keys
Rotation
Switch
General.
The VG controller has a Pre-Heat function and memory for 15 Cook and Hold programs.
On top of this, each program contains a Multi-stage Cook option and an Extra Cook Time feature,
the multi-stage cook option is made up of two parts: Stage 1 (Time & Temp) and Stage 2 (Time &
Temp).
The features and flexibility of this controller allow the operator to create and store programs based
on popular items and product lines against a recipe/program number, to ensure consistent results.
The controller is divided into three parts:
The Display area
The Navigation keys
The Function keys
5
THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA
WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI.
THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI.
ALL RIGHTS ARE RESERVED.
NOTICE:
Navigation Keys
Temperature “UP & Down”
Time “Up & Down”
Program “Up & Down”
Heat “ON”
Oven Light
Switch
(Cont).
Loading...