Bakers Pride Y-600-DSP User Manual
Specifications
Standard Features
• Y Series at 120,000 BTUH per deck, natural or LP gas
• 300°-650°F (149° - 343°C) thermostat
• Top and bottom heat control dampers & micro-
slides
• Combination gas controls with valve, regulator &
pilot safety
• Heavy-duty, slide-out flame diverters
• 8” (203mm) interior deck heights with 2” (50.80mm)
thick Fibrament hearth decks
• Black powder coated doors
• Custom hardwood handles
• Dome top
• Front & side skirts
• Aluminized steel interiors
• Spring balanced, fully insulated doors
• Rear gas connections
• 7-Gauge legs
• Fully insulated throughout
• 2 Year limited warranty
Options & Accessories
• Side-mounted controls
• Steel decks
• 150°-550°F (65°-288°C) thermostat
• Automatic oven starter
• Draft flue for direct vent (non available on CE units)
• Dome top
• Front & side skirts
• All stainless steel exterior with stainless steel dome &
stainless steel or black powder-coated doors
Certifications
SUPER DECK Y-DSP SERIES GAS DISPLAY OVENS
Bakers Pride Food Service Equipment • 1307 N Watters Rd. Suite 180 • Allen, Texas 75013 • 800.431.2745
www.bakerspride.com
Revised 011416cp
Bakers Pride Y-DSP Display Ovens are ideal for display cooking
and exhibition kitchens. These ovens are designed and
engineered to be “built-in” behind brick, stone or tile.
Ovens may be stacked two high. Ovens exteriors are all
heavy-gauge steel and are fully insulated up to 5” (127mm)
thick for cooler outer temperatures and consistent interior
temperatures.
Interior oven frame is constructed of ¼” (6mm) heavy-duty
angle iron frame, completely welded to form a single, unitized
section. The oven body and lining are then welded to the
framework.
Oven interiors are manufactured of high-heat resistant 16gauge aluminized steel. Doors are fully insulated, spring
balanced with natural black finish and custom wood handles.
Lintel plates support the masonry or tile for ease of installation.
Standard features include dome top plus front and side skirts.
All models feature independent, operator-controlled top &
bottom heat control dampers and micro slides for perfectly
balanced results.
Combination gas control incorporates a manual gas valve,
pilot safety and pressure regulator. Easily removable, slideout, heavy-duty flame diverters distribute the burner flame
uniformly in the burner chambers. A ¾” (19mm) NPT gas
connection is located on the left side and left rear of oven –
operator/installer may choose.
Heavy-duty, 7-gauge hot rolled steel legs are standard and
finished with durable Bakertone.
2 Year limited warranty standard
Models – Y-600DSP Y-602 DSP
Y-800DSP Y-802 DSP
SUPER DECK Y-DSP SERIES GAS DISPLAY OVENS
Bakers Pride Food Service Equipment • 1307 N Watters Rd. Suite 180 • Allen, Texas 75013 • 800.431.2745
www.bakerspride.com
Revised 011416cp
Loading...