Bakbar GPE58 User Manual

Technical data sheet for

GAS GRIDDLE ELECTRIC CONVECTION
OVEN RANGE 1200mm

GPE58

Heavy-duty thermostatic gas griddle
20mm thick griddle plate
Ribbed plate options
Mirror chromed plate options
Top weld sealed plates
108MJ thermostatic griddle burner system
Separate left, centre, and right heat zones
GN 2/1 6.6kW electric convection oven
Drop down door
Storage cabinet on right hand side
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular

GPE58

Overall Construction

• Galvanized steel chassis

• Welded hob surround with 1.5mm 304 stainless steel bull nose

• Hob sides 1.2mm 30 4 stainless steel

• Splashback 1.2mm 304 stainless steel

• Oven sides 0.9mm 304 stainless steel

• Vitreous enamelled hob control panel

• Full 0.9mm stainless steel storage cabinet on right hand side

• 63mm dia. heavy-duty 1.2mm 304 stainless steel adjustable
legs at front and two rollers at rear

Griddle

• 20mm thick machined top plates standard

• Optional ribbed plate sections

• Optional mirror nish hard chrome plates

• 2.5mm thick 304 stainless steel splash guards sides and rear

• 2.5mm thick grease channel

• Three 36MJ 3 bar even heat burners with dual thermostatic controls

• Full pilot and ame failure protection with piezo ignition

• Stainless steel grease drawer

• Overlapping nish at front and rear of plate for easy clean

Oven

• Fully welded and vitreous enamelled oven liner

• GN 2/1 capacity with 4 position racking

• Heav y-duty easy remove heavy wire chrome rack suppor ts

• Cast iron even heat oven sole plate

• 6.5kW heating elements

• 100W heavy-dut y motor

• 200mm diameter heav y-duty circulation fan

• Drop down door

• 0.9mm 304 stainless steel door outer

• 1.0mm vitreous enamelled door inner

• High density breglass insulated

• Supplied with two chrome wire oven racks

Controls

• Large easy use control knobs - heat resistant reinforced

• Easy view control settings on knobs

Griddle

• Separate lef t, centre and right side heat zones

• Three 90-300°C thermostats

• Flame failure pilot burners

• Piezo ignition to each pilot burner

• Over-temperature safety cut-outs

Oven

• 50-320°C thermostatic control

• Indicator lights for power and heating

• Fan and elements automatic off when doors open

Cleaning and Servicing

• All models with easy clean stainless steel external nish

• Plate is nished front and rear with overlap construction to remove
cleaning traps

• Control service and gas conversion through front of unit

• Burner service requires plate removal

• Removable oven racking and sole plate

• Easy clean vitreous enamel oven and door inner

• Access to all parts from front of unit

Technical data sheet for

GAS GRIDDLE ELECTRIC CONVECTION
OVEN RANGE 1200mm

Specifications

Burners – Griddle

Three 36MJ 3 bar chromed steel burners
Individual pilot, ame failure and piezo ignition

Elements – Oven

4.5kW bottom heat element

2.0kW top heat element

Oven Fan Motor

100W

Gas power

108MJ/hr, 30kW

Electrical requirements

6.6kW

1 phase connection:

230-240Vac, 50/60hz, 1P+N+E, 27.7A

3 phase connection:

400-415Vac, 50/60hz, 3P+N+E
L1 9.4A
L2 9.4A
L3 9.0A

Plate

Cooking surface 1192mm x 530mm, 6318cm2

Oven Dimensions

Width 665mm
Depth 590mm
Height 385mm
Rack size 660mm x 540mm
Rack positions 4

Gas connection

3

/4 (BSP) male

R
Optional underside connection, please specify
when ordering
All units supplied with Natural and LP gas
regulator

Dimensions

Width 1200mm
Depth 812mm
Height 915mm
Incl. splashback 1085mm

Nett weight

220kg

Packing data

1.36m3, 300kg
Width 1245mm
Depth 870mm
Height 1255mm

Gas types

Available in Natural gas and LP gas, please specify
when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request

Options

Adjustable feet at rear
Joining caps
Castors
Ribbed plate options
Mirror chromed plate options

GPE58

Cert 7088

Moffat / 7.09 / 1140