Bakbar GPE56 Installation Manual

INSTALLATION AND OPERATION MANUAL

GAS GRIDDLE RANGES
ELECTRIC OVEN

GPE506
GPE56
GPE508
GPE58

For use in GB & IE

230112-16

MANUFACTURED BY

Moffat Limited

Rolleston 7675
New Zealand

INTERNATIONAL CONTACTS

AUSTRALIA

Moffat Pty Limited
Web: www.moffat.com.au
E.Mail: [e-mail]
Main Office: (tel) [phone]

(fax) [phone]

Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281

CANADA

Serve Canada
Web: www.servecanada.com
E.Mail: [e-mail]
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)

NEW ZEALAND

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]
Main Office: (tel): 0800 663328

UNITED KINGDOM

Blue Seal
Web: www.blue-seal.co.uk
E.Mail: [e-mail]
Sales: (tel): [phone]

(fax): [phone]
Spares: (tel): [phone]
(fax): [phone]
Service: (tel): [phone]
(fax): [phone]

UNITED STATES

Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)

(tel): [phone]
(fax): [phone]
Service: (tel): 800 858 4477 (Toll Free)
(tel): [phone]
(fax): [phone]

REST OF WORLD

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]

The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in
writing by the manufacturer.

In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice.

© Copyright Moffat Ltd. December 2014.

Contents

Blue Seal Gas Griddle Ranges - Electric Oven

GPE506 Gas Griddle Range, Electric Static Oven - 900mm.
GPE56 Gas Griddle Range, Electric Convection Oven - 900mm.
GPE508 Gas Griddle Range, Electric Static Oven - 1200mm.
GPE58 Gas Griddle Range, Electric Convection Oven - 1200mm.

Introduction .............................................................................................. 2

Specifications ............................................................................................ 3

Model Numbers Covered in this Specification

Gas Supply Requirements

Electrical Supply Requirements

Electrical Connection

Dimensions ................................................................................................ 7

Installation ................................................................................................ 8

Installation Requirements

Unpacking

Location

Clearances

Assembly

Gas Connection

Electrical Connection

Commissioning

Operation ................................................................................................. 12

Operation Guide

Description of Controls

Lighting the Griddle - Pilot Burners

Lighting the Griddle - Main Burners

Re-setting the Overtemp Device (All UK and Optional Non UK Models)

Turning ‘Off’ the Griddle Main Burner / Pilot Burner

Oven

Cleaning and Maintenanc e ...................................................................... 15

General

After Each Use

Daily Cleaning

Weekly Cleaning

Periodic Maintenance

Fault Finding ............................................................................................ 18

Wiring Schematics ................................................................................... 19

Gas Conversion and Specifications ......................................................... 22

Conversion Procedure

Gas Specifications

Replacement Parts List ........................................................................... 26

Introduction

We are confident that you will be delighted with your BLUE SEAL Gas Griddle Range - Electric Oven and it
will become a most valued appliance in your commercial kitchen.

To ensure you receive the utmost benefit from your new Blue Seal appliance, there are two important
things you can do.

Firstly:

Please read the instruction book carefully and follow the directions given. The time taken will be well
spent.

Secondly:

If you are unsure of any aspect of the installation, instructions or performance of your appliance,
contact your BLUE SEAL dealer promptly. In many cases a phone call could answer your question.

CE Only:

These instructions are only valid if the country code appears on the appliance. If the code does not
appear on the appliance, refer to the supplier of this appliance to obtain the technical instructions for
adapting the appliance to the conditions for use in that country.

Warning

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY

DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS APPLIANCE.

INSTRUCTIONS
LOCATION. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING THE LOCAL GAS SUPPLIER.

TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS ARE TO BE POSTED IN A PROMINENT

Warning

Warning

THE OPERATOR MUST TAKE GREAT CARE TO USE THE EQUIPMENT SAFELY TO GUARD AGAINST RISK OF FIRE

AND INJURY.

 T
 I

 DO NOT



HE APPLIANCE MUST NOT BE LEFT ‘ON’, UNATTENDED.

T IS RECOMMENDED THAT A REGULAR INSPECTION IS MADE BY A COMPETENT SERVICE PERSON TO

ENSURE CORRECT AND SAFE OPERATION OF YOUR APPLIANCE IS MAINTAINED.

STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS OR LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.



This appliance is for professional use and is only to be used by qualified
persons.



Only authorised service persons are to carry out installation, servicing or gas
conversion operations.



Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.



DO NOT operate the appliance without the legs supplied fitted.

Caution

2

Specifications

Model Numbers Covered in this Specification

GPE506 Gas Griddle Range, Electric Static Oven - 900mm.
GPE56 Gas Griddle Range, Electric Convection Oven - 900mm.
GPE508 Gas Griddle Range, Electric Static Oven - 1200mm.
GPE58 Gas Griddle Range, Electric Convection Oven - 1200mm.

General

A commercial heavy duty, fully modular, gas fired griddle / electric oven range using a thermostatic
burner system on the griddle and fitted with 3 bar even heat aluminised steel burners with full pilot
and flame failure protection and piezo ignition to each burner.

All UK models and optional Non UK models are fitted with an overtemp device which isolates the gas
supply to burners should gas control system or thermostat malfunction, thus preventing overheating
of the griddle.

the

The griddle uses a 20mm thick griddle plate with

option of either ribbed or chromed mirror plate

options and is available in either 900 mm or 1200mm griddle size.

With a heavy duty, high efficiency electric static or convection oven options, fitted with a 900mm,

6.5 kW electric static oven and a 6.6 kW Convection Oven created for compact modular kitchens.
Both ovens are fitted with 4.5 kW bottom elements and 2.0 kW top element. The Convection Oven
is fitted with a 100W oven fan motor.

The appliance is built to facilitate easy cleaning and maintenance with all parts being front accessible
once appliance is installed.

3

Specifications

Gas Supply Requirements

- Australia

Input Rating (N.H.G.C.)
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa

Burner Operating Pressure (*) 0.90 kPa 2.6 kPa
Gas Connection ¾” BSP Male

- New Zealand Only:

Input Rating (N.H.G.C.)
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa

Burner Operating Pressure (*) 0.90 kPa 2.6 kPa

Gas Connection ¾” BSP Male

- UK Only:

Category: II
Flue Type: A

Heat Input (nett) 21 kW 28.5 kW 21 kW 28.5 kW

Gas Rate (nett) 2.22 m3/hr 3.02 m3/hr 1.63 kg/hr 2.21 kg/hr
Supply Pressure 20 mbar 37 mbar

Burner Operating Pressure (*) 8.2 mbar 26 mbar

Gas Connection

Natural Gas LP Gas (Propane)

GPE506/GPE56 GPE508/GPE58 GPE506/GPE56 GPE508/GPE58

80 MJ/hr 108 MJ/hr 80 MJ/hr 108 MJ/hr

Natural Gas LP Gas

GPE506/GPE56 GPE508/GPE58 GPE506/GPE56 GPE508/GPE58

80 MJ/hr 108 MJ/hr 80 MJ/hr 108 MJ/hr

(20, 37).

2H3P

1.

Natural Gas (G20) Propane (G31)

GPE506/GPE56 GPE508/GPE58 GPE506/GPE56 GPE508/GPE58

3

/4” BSP Male

* - Measure burner operating pressure at gas control valve outlet test point with one burner

operating at ‘High’ setting. Operating pressure is ex-factory set, through the appliance
regulator and not to be adjusted, apart from when converting between gases, if required.
(Refer to ‘Gas Conversion’ section for details).

4

- All Other Markets

Specifications

Input Rating (N.H.G.C.) 80 MJ/hr 108 MJ/hr 80 MJ/hr 108 MJ/hr

Supply Pressure 1.13 - 3.40 kPa 0.75 - 1.50 kPa

Burner Operating Pressure (*) 0.90 kPa 0.45 kPa

Gas Connection ¾” BSP Male

Input Rating (N.H.G.C.) 80 MJ/hr 108 MJ/hr 80 MJ/hr 108 MJ/hr
Supply Pressure 2.75 - 4.50 kPa 2.75 - 4.50 kPa

Burner Operating Pressure (*) 2.6 kPa 2.6 kPa

Gas Connection ¾” BSP Male

GPE506/GPE56 GPE508/GPE58 GPE506/GPE56 GPE508/GPE58

GPE506/GPE56 GPE508/GPE58 GPE506/GPE56 GPE508/GPE58

Natural Gas Town Gas (**)

LP Gas (Propane) Butane

(*) NOTE:

 (*) Measure burner operating pressure at at gas valve outlet test point with burner

operating at 'High Flame' setting.

 NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted,

unless when converting between gases, if required.

 (**) TOWN GAS Only - Adjust burner operating pressure using adjustable gas regulator

supplied.

 Refer to ‘Gas Conversion and Specifications' section in this manual for further details.

Gas Connection

Gas supply connection point is located 130mm from right hand side of appliance, 32mm from rear,
655mm from floor and is entered from beneath appliance. An optional underside connection is
available.

Connection is ¾” BSP male.

5

Specifications

Electrical Supply Requirements

MODEL

GP8910GE
GP8121GE

GP8910GEC
GP8121GEC

1-Phase Connection

1P+N+E

230-240V

6.5 kW,

26.6 Amps @ 235V

6.8 kW,

27.9 Amps @ 235V

3-Phase Connection

3P+N+E

400-415V

6.5 kW

6.8 kW

L1 - 8.2 Amps
L2 - 9.2 Amps
L3 - 9.2 Amps

L1 - 9.5 Amps
L2 - 9.2 Amps
L3 - 9.2 Amps

Electrical Connection

Warning

THIS APPLIANCE MUST BE EARTHED. IF SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY A SUITABLY

QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

When connecting a this electric appliance to the mains supply, ensure that the following is carried
out:-

 An isolating switch is fitted within 2m of the appliance, but not on the appliance and in

such a position that the user does not have to reach across the cooking surface.

 Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary pol-

ychloroprene or other equivalent synthetic elastomer sheathed cord (As per AS / NZS 3191
Part 2.10.11. or IEC 60245-IEC-57) e.g. HO5 RN-F Type.

 The branch supply line shall be individually overload protected to the correct current rating

and the supply chord shall be protected against any mechanical or thermal damage.

 A grommet is fitted around the wiring entry hole into the appliance.
 All wiring connections must be tight.

Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance
for the current drawn on that line.

6

GPE506 / GPE56

Dimensions

501

GPE508 / GPE58

7