Bakbar GP516-B User Manual

Technical data sheet for

GAS GRIDDLE 900mm

GP516-B, GP516-CB, GP516-LS, GP516-RB

Heavy-duty thermostatic gas griddle
20mm thick griddle plate
Ribbed plate options
Mirror chromed plate options
Top weld sealed plates
80MJ thermostatic burner system
Separate left and right heat zones
3 models of base unit
1 model of ventilated 2 drawer refrigeration base
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular

GP516-LS

Overall Construction

Griddle

• 20mm thick machined top plates standard

• Optional ribbed plate sections

• Optional mirror nish hard chrome plates

• 2.5mm thick 304 stainless steel splash guards sides and rear

• 2.0mm thick grease channel

• Two 40MJ 3 bar even heat burners with dual thermostatic controls

• Full pilot and ame failure protection with piezo ignition

• Welded hob surround with 1.5mm 304 stainless steel bull nose

• Side panels 1.2mm 304 stainless steel

• Splashback 1.2mm 304 stainless steel

• Vitreous enamelled control panel

• Stainless steel grease drawer

• Overlapping nish at front and rear of plate for easy clean

Bench mount (supplied as –B model)

• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs
with adjustable feet.

• Adjustable height 80mm – 105mm

Cabinet base (supplied as – CB model)

• Fully modular for match suite nish

• Double skin 0.9mm 304 stainless steel interior and exterior

• Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)

• Up to eight 65mm GN 1/1 capacity

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear

Leg Stand (supplied as –LS model)

• Fully modular for matched suite nish

• Framed top for connection to Griddle

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear

• Fully modular framed stand shelf with 0.9mm 304 stainless
steel nish

• Suitable for rear or through shelf gas connection to Griddle

• Quick assembly design

Refrigerated base (supplied as –RB model)

• Self contained suite matched modular base

• Ventilated system with R134a refrigerant

• -2° to + 8°C temperature (Tropical Climate rated)

• Two GN 1/1 drawers

• 100mm deep pan capacity

• Heav y-duty European telescopic drawer guides

• Magnetic drawer gaskets (replaceable without tools)

• 50mm fully foamed CFC free insulation

• 304 stainless steel exterior and interior

• Anti-corrosion treated evapor ator

• No condensate drain required

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet

• Condensing unit removable through front of unit for service

• Easy clean interior

Controls

Griddle

• Separate lef t and right side heat zones

• Two 90-300°C thermostats

• Large easy use control knobs - heat resistant reinforced

• Easy view control settings on knobs

• Flame failure pilot burners

• Piezo ignition to each pilot burner

• Over-temperature safety cut-outs

Refrigerated base

• Digital control electronic thermostat

• Automatic defrost

• Automatic evaporation of defrost water

• -2 to +8°C temperature r ange

Cleaning and Servicing

• All models with easy clean stainless steel external nish

• Plate is nished front and rear with overlap construction to remove
cleaning traps

• Control service and gas conversion through front of unit

• Burner service requires plate removal

• Refrigerated Base condenser removable through front of unit

Technical data sheet for

GAS GRIDDLE 900mm

Specifications

Griddle
Burner

Two 3 bar chromed steel burners
Individual pilot, ame failure and piezo ignition

Gas power

80MJ/hr, 22.2kW

Plate

Cooking surface 892mm x 530mm, 4728cm2

Gas connection

3

R

/4 (BSP) male
All units supplied with Natural and LP gas
regulator

Refrigerated base
Type

Ventilated system

Refrigerant

R134a (160grams)

Climate classification

T – tropical

Electrical connection

220-240Vac, 50Hz, 1.8A , 1P+N+E
3 pin 10A plug cordset tted

Dimensions

Bench models

Width 900mm
Depth 812mm
Height 315mm
Incl. splashback 485mm

All models (excluding Bench model)

Width 900mm
Depth 812mm
Height 915mm
Incl. splashback 1085mm

Nett weight

Bench and Leg Stand models

157kg

Cabinet Base and Refrigerated Base models

200kg

Packing data

Bench and Leg Stand models

0.55m3, 222kg
Width 945mm
Depth 870mm
Height 665mm

Cabinet Base and Refrigerated Base models

1.03m3, 265kg
Width 945mm
Depth 870mm
Height 1255mm

Gas types

Available in Natural gas and LP gas, please specify
when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request

Options

Adjustable feet at rear
Joining caps
Castors
Ribbed plate options
Mirror chromed plate options

GP516-B

GP516-LS

GP516-CB

GP516-RB

PLAN

Cert 6898

Moffat / 7.09 / 1140