Bakbar GP513-B User Manual
Technical data sheet for
GAS GRIDDLE 450mm
GP513-B, GP513-CB, GP513-LS
Heavy-duty thermostatic gas griddle
20mm thick griddle plate
Ribbed plate options
Mirror chromed plate options
Top weld sealed plates
40MJ thermostatic burner system
2 models of base unit
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular
Overall Construction
Griddle
• 20mm thick machined top plates standard
• Optional ribbed plate sections
• Optional mirror finish hard chrome plates
• 2.5mm thick 304 stainless steel splash guards sides and rear
• 40MJ single 3 bar even heat burner with single thermostatic control
• Full pilot and flame failure protection with piezo ignition
• Welded hob surround with 1.5mm 304 stainless steel bull nose
• Side panels 1.2mm 304 stainless steel
• Splashback 1.2mm 304 stainless steel
• Vitreous enamelled control panel
• Stainless steel grease drawer
• Overlapping finish at front and rear of plate for easy clean
Bench mount (supplied as –B model)
• Four 63mm dia. heav y-duty 1.2mm 304 stainless steel bench legs
with adjustable feet.
• Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
• Fully modular for matched suite finish
• Double skin 0.9mm 304 stainless steel interior and exterior
• GN 1/1 4 position racking
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
Leg stand (supplied as –L S model)
• Fully modular for matched suite finish
• Framed top for connection to Griddle
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
• Fully modular framed stand shelf with 0.9mm 30 4 stainless
steel finish
• Quick assembly design
GP513-LS
Controls
• 90-300°C thermostat
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
• Flame failure pilot burner
• Piezo ignition to pilot burner
• Over-temperature safety cut-out
Cleaning and Servicing
• All models with easy clean stainless steel external finish
• Plate is finished front and rear with overlap construction to remove
cleaning traps
• Control ser vice and gas conversion through front of unit
• Burner ser vice requires plate removal
450
812
Technical data sheet for
GAS GRIDDLE 450mm
Specifications
Burner
3 bar chromed steel burner with pilot, flame
failure and piezo ignition
Gas power
40MJ/hr, 11.1kW
Plate
Cooking sur face 442mm x 530mm, 2343cm2
Gas connection
3
/4 (BSP) male
R
All units supplied with Natural and LP gas
regulator
Dimensions
Bench model
Weight 77kg
Width 450mm
Depth 812mm
Height 315mm
Incl. splashback 485mm
Cabinet Base / Leg Stand models
Weight 90kg
Width 450mm
Depth 812mm
Height 915mm
Incl. splashback 1085mm
Packing data
Bench model
0. 2 9 m3, 111k g
Width 870mm
Depth 495mm
Height 665mm
Cabinet Base / Leg Stand models
0.5 4m3, 13 0kg
Width 870mm
Depth 495mm
Height 1255mm
Gas types
Available in Natural gas and LP gas, please specif y
when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request
Options
Adjustable feet at rear
Joining caps
Castors
Ribbed plate options
Mirror chromed plate options
GP513-B
32
319 100 525
GAS
ENTRY
GP513-LS
450
32
GAS
ENTRY
655
319 100 525
GP513-CB
450 812
32
GAS
ENTRY
656
319 100 525
PLAN
130
70
485
315
85
70
70
812
1085
915
150
1085
915
150
Cert 6898
Moffat / 8.13 / 1358
Loading...