Bakbar GP513-B Installation Manual

INSTALLATION AND OPERATION MANUAL

GAS GRIDDLE

GP513
GP514
GP516
GP518

For use in GB & IE

229284-18

MANUFACTURED BY

Moffat Limited

Rolleston 7675
New Zealand

INTERNATIONAL CONTACTS

AUSTRALIA

Moffat Pty Limited
Web: www.moffat.com.au
E.Mail: [e-mail]
Main Office: (tel) [phone]

(fax) [phone]

Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281

CANADA

Serve Canada
Web: www.servecanada.com
E.Mail: [e-mail]
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)

NEW ZEALAND

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]
Main Office: (tel): 0800 663328

UNITED KINGDOM

Blue Seal
Web: www.blue-seal.co.uk
E.Mail: [e-mail]
Sales: (tel): [phone]

(fax): [phone]
Spares: (tel): [phone]
(fax): [phone]
Service: (tel): [phone]
(fax): [phone]

UNITED STATES

Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)

(tel): [phone]
(fax): [phone]
Service: (tel): 800 858 4477 (Toll Free)
(tel): [phone]
(fax): [phone]

REST OF WORLD

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]

The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized p reviously in
writing by the manufacturer.

In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice.

© Copyright Moffat Ltd. December 2014.

Contents

Blue Seal Gas Griddle

GP513 Gas Griddle, 450mm.
GP514 Gas Griddle, 600mm.
GP516 Gas Griddle, 900mm.
GP518 Gas Griddle, 1200mm.

Introduction ............................................................................................. 2

Specifications ........................................................................................... 3

Model Numbers Covered in this Specification
General
Gas Supply Requirements
Gas Connection

Dimensions ................................................................................................ 6

Installation .............................................................................................. 10

Installation Requirements
Unpacking
Location
Clearances
Assembly
Gas Connection
Commissioning

Operation ................................................................................................. 13

Operation Guide
Description of Controls
Lighting Pilot Burner
Lighting Main Burner
Turning ‘Off’ Main Burner
Re-Setting Overtemp Device (All UK and Optional Non-UK Models)

Cleaning and Maintenance ...................................................................... 16

General
After Each Use
Daily Cleaning
Weekly Cleaning

Fault Finding ............................................................................................ 19

Gas Conversion and Specifications ......................................................... 20

Conversion Procedure
Gas Specifications

Replacement Parts List ........................................................................... 25

Introduction

We are confident that you will be delighted with your BLUE SEAL GAS GRIDDLE, and it will become a most
valued appliance in your commercial kitchen.
To ensure you receive the utmost benefit from your new BLUE SEAL GAS GRIDDLE, there are two
important things you can do.

Firstly:

Please read the instruction book carefully and follow the directions given. The time taken will be well
spent.

Secondly:

If you are unsure of any aspect of the installation, instructions or performance of your appliance,
contact your BLUE SEAL dealer promptly. In many cases a phone call could answer your questi on.

CE Only:

These instructions are only valid if the country code appears on appliance. If code does not appear on
appliance, refer to supplier of this appliance to obtain technical instructions for adapting appliance to
conditions for use in that country.

Warning

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY

DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS APPLIANCE.

INSTRUCTIONS
LOCATION. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING THE LOCAL GAS SUPPLIER.

TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS ARE TO BE POSTED IN A PROMINENT

Warning

Warning

GREAT CARE MUST BE TAKEN BY THE OPERATOR TO USE THE EQUIPMENT SAFELY TO GUARD IT AGAINST RISK OF

FIRE.

 T
 I

 DO NOT



HE APPLIANCE MUST NOT BE LEFT ON UNATTENDED.

T IS RECOMMENDED THAT A REGULAR INSPECTION IS MADE BY A COMPETENT SERVICE PERSON TO

ENSURE CORRECT AND SAFE OPERATION OF YOUR APPLIANCE IS MAINTAINED.

STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS OR LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.



This appliance is for professional use and is only to be used by qualified
persons.



Only authorised service persons are to carry out installation, servicing or gas
conversion operations.



Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.



DO NOT operate the appliance without the legs supplied fitted.

Caution

2

Model Numbers Covered in this Specification

GP513 - B Gas Griddle 450mm wide Bench Model.
GP513 - CB Gas Griddle 450mm wide with Cabinet Base.
GP513 - LS Gas Griddle 450mm wide on Leg Stand.

GP514 - B Gas Griddle 600mm wide Bench Model.
GP514 - CB Gas Griddle 600mm wide with Cabinet Base.
GP514 - LS Gas Griddle 600mm wide on Leg Stand.

GP516 - B Gas Griddle 900mm wide Bench Model.
GP516 - CB Gas Griddle 900mm wide with Cabinet Base.
GP516 - LS Gas Griddle 900mm wide on Leg Stand.
GP516 - RB Gas Griddle 900mm wide with Refrigerated Base.

GP518 - B Gas Griddle 1200mm wide Bench Model.
GP518 - CB Gas Griddle 1200mm wide with Cabinet Base.
GP518 - LS Gas Griddle 1200mm wide on Leg Stand.
GP518 - RB Gas Griddle 1200mm wide with Refrigerated Base.

General

Specifications

A commercial heavy duty, fully modular, gas fired griddle using a thermostatic burner system and
fitted with aluminised steel burners with full pilot and flame failure protection and piezo ignition.
It uses a 20mm thick griddle plate with the option of either ribbed or chromed mirror plate options.

All UK Models and optional Non-UK models are fitted with an overtemp device which isolates the gas
supply to the burners should the gas control system or thermostat malfunction, thus preventing
overheating of the griddle.

The Griddle is constructed as a hob unit and is available in 4 options, on Leg Stand (-LS), Bench
Mount (-B), Cabinet Base (-CB) or with Refrigerated Base (RB) models (RB Models available for
GP516 and GP518 Models only).

3

Specifications

Gas Supply Requirements

- Australia

Input Rating (N.H.G.C.)
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa

Burner Operating Pressure (*) 0.90 kPa 0.85 kPa 0.90 kPa 2.6 kPa 2.5 kPa 2.6 kPa
Gas Connection ¾” BSP Male

GP513 GP514 GP516 GP518 GP513 GP514 GP516 GP518

40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr

Natural Gas

LP Gas (Propane)

- New Zealand Only:

Input Rating (N.H.G.C.)
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa

Burner Operating Pressure (*) 0.90 kPa 0.85 kPa 0.90 kPa 2.6 kPa 2.5 kPa 2.6 kPa
Gas Connection ¾” BSP Male

GP513 GP514 GP516 GP518 GP513 GP514 GP516 GP518

40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr

Natural Gas

LP Gas

- UK Only:

Category: II
Flue Type: A

(20, 37).

2H3P

1.

Natural Gas (G20)

Propane (G31)

GP513 GP514 GP516 GP518

Heat Input (nett) 10.5 kW 13.3 kW 21 kW 28.5 kW 10.5 kW 13.3 kW 21 kW 28.5 kW
Gas Rate (nett) 1.11 m3/hr 1.41 m3/hr 2.22 m3/hr 3.02 m3/hr 0.81 kg/hr 1.03 kg/hr 1.63 kg/hr 2.21 kg/hr
Supply Pressure 20 mbar 37 mbar
Burner Operating Pressure (*) 8.2 mbar 8.5 mbar 8.2 mbar 26 mbar
Gas Connection

3

GP513 GP514 GP516 GP518

/4” BSP Male

* - Measure burner operating pressure at gas control valve outlet test point with burner operating at

‘High’ setting. Operating pressure is ex-factory set, through the appliance regulator and not to
be adjusted, apart from when converting between gases, if required. (Refer to ‘Gas Conversion’
section for details).

For Refrigeration Cabinet Specifications refer to Refrigeration Cabinet Installation and Operation
Manual supplied with appliance.

4

- All Other Markets

Specifications

Input Rating (N.H.G.C.) 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr
Supply Pressure 1.13 - 3.40 kPa 0.75 - 1.50 kPa

Burner Operating Pressure (*) 0.90 kPa 0.85 kPa 0.90 kPa
Gas Connection ¾” BSP Male

GP8450 GP8600 GP8900 GP8120 GP8450 GP8600 GP8900 GP8120

Natural Gas Town Gas (**)

0.45 kPa

GP513 GP514 GP516 GP518 GP513 GP514 GP516 GP518

Input Rating (N.H.G.C.) 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr
Supply Pressure 2.75 - 4.50 kPa 2.75 - 4.50 kPa

Burner Operating Pressure (*) 2.6 kPa 2.5 kPa 2.6 kPa 2.6 kPa 2.5 kPa 2.6 kPa
Gas Connection ¾” BSP Male

LP Gas (Propane) Butane

(*) NOTE:

 (*) Measure burner operating pressure at at gas valve outlet test point with burner

operating at 'High Flame' setting.

 NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted,

unless when converting between gases, if required.

 (**) TOWN GAS Only - Adjust burner operating pressure using adjustable gas regulator

supplied.

 Refer to ‘Gas Conversion and Specifications' section in this manual for further details.

Gas Connection

Bench Models

Gas supply connection point is located at rear of appliance, approximately 130mm from right hand
side, 32mm from rear, 55mm from floor and is reached from rear of appliance. (Refer to
‘Dimensions’ section).

Connection is ¾" BSP male (For all other models).

All Other Models

Gas supply connection point is located at rear of appliance, approximately 130mm from right hand
side, 32mm from rear, 655mm from floor and is reached from beneath appliance. (Refer to
‘Dimensions’ section).

Connection is ¾" BSP male (For all other models).

5

Dimensions

Dimensions for Bench Models

GP513 - B

GP514 - B

= Rating Plate Location for

R

this option.

GP516 - B

GP518 - B

R

6

Dimensions

Dimensions for Cabinet Base Models

GP513 - CB

GP514 - CB

= Rating Plate Location for

R

this option.

GP516 - CB

GP518 - CB

R

7