Bakbar GE58A User Manual
Technical data sheet for
GAS RANGE ELECTRIC
CONVECTION OVEN 1200mm
GE58D, GE58C, GE58B, GE58A
Heavy-duty construction
28 MJ/hr open burners
Flame failure standard
Pilot burners optional
300mm, 600mm, and 900mm griddle
plate options
Optional simmer plates
GN 2/1 6.6kW electric convection oven
Drop down door
Storage cabinet on RH side
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular
GE58D
Overall Construction
• Galvanized steel chassis
• Welded hob with 1.5mm 304 stainless steel bull nose
• Hob sides 1.2mm 30 4 stainless steel
• Splashback 1.2mm 304 stainless steel
• Front panels and oven sides 0.9mm 304 stainless steel
• Vitreous enamelled hob control panel
• Full 0.9mm stainless steel storage cabinet on RH side
• 63mm dia. heavy-duty 1.2mm 304 stainless steel adjustable
legs at front and two rollers at rear
Cooktop
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plates
• 2.5mm 304 stainless steel griddle splash guards
• Stainless steel spill trays
• Aluminised steel internal construction
Griddle sections are standard on RH side. Available on LH side or
centre to order or by conversion
Oven
• Fully welded and vitreous enamelled oven liner
• GN 2/1 capacity with 4 position racking
• Heav y-duty easy remove heavy wire chrome rack suppor ts
• Cast iron even heat oven sole plate
• 6.5kW heating elements
• 100W heavy-dut y motor
• 200mm diameter heav y-duty circulation fan
• Drop down door
• 0.9mm 304 stainless steel door outer
• 1.0mm vitreous enamelled door inner
• High density breglass insulated
• Supplied with two chrome wire oven racks
Controls
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Cooktop
• Variable high to low controls to open burners
• Open burners ame failure standard with pilot burners optional
• Variable high to low controls to griddles
• Griddles standard with pilot, ame failure and piezo ignition
Oven
• 50-320°C thermostatic control
• Indicator lights for power and heating
• Fan and elements automatic off when doors open
Cleaning and Servicing
• All models with easy clean stainless steel external nish
• Lift off burner heads and vitreous enamelled burner spill covers
• Stainless steel spill trays under open burner and griddle sections
• Removable oven racking and sole plate
• Easy clean vitreous enamel oven and door inner
• Access to all parts from front of unit
Technical data sheet for
GAS RANGE ELECTRIC
CONVECTION OVEN 1200mm
Specifications
Burners
Open Burners 28MJ/hr dual ame ring with
simmer r ate
Griddle Burners 20MJ/hr per 300mm section
Oven Elements
4.5kW bottom heat element
2.0kW top heat element
Gas power
GE58D 224 MJ/hr, 62.2kW
GE58C 188 MJ/hr, 52.2kW
GE58B 152 MJ/hr, 42.2kW
GE58A 116 MJ/hr, 32.2kW
Oven Fan Motor
100W
Electrical requirements
6.6kW
1 phase connection:
230-240Vac, 50/60hz, 1P+N+E, 27.7A
3 phase connection:
400-415Vac, 50/60hz, 3P+N+E
L1 9.4A
L2 9.4A
L3 9.0A
Griddle Plate
300mm Griddle cooking sur face
292mm x 475mm, 1387cm2
600mm Griddle cooking sur face
592mm x 475mm, 2812cm2
900mm Griddle cooking sur face
892mm x 475mm, 4237cm2
Oven Dimensions
Width 665mm
Depth 590mm
Height 385mm
Rack size 660mm x 540mm
Rack positions 4
Gas connection
3
/4 (BSP) male
R
Optional underside connection, please specify
when ordering
All units supplied with Natural and LP gas
regulator
Dimensions
Width 1200mm
Depth 812mm
Height 915mm
Incl. splashback 1085mm
Nett weight
220kg
Packing data
1.36m3, 300kg
Width 1245mm
Depth 870mm
Height 1255mm
Gas types
Available in Natural gas and LP gas, please specify
when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request
Options
Adjustable feet at rear
Simmer plates (replaces Potstand)
Ribbed griddle plates
Joining caps
Castors
GE58
GE58D GE58C
GE58B GE58A
Cert 6913
Moffat / 7.09 / 1140
Loading...