Baja Motorsports MB165 Assembly Guide

Baja Motorsports,LLC

Set-up Instructions Mini Bike

1. Remove cardboard carton from
metal frame.

Tool kit packet

Mso and Owners manual

Removal from crate

2.

Remove operating instructions,
manufacture statement of
origin,and owners manual
located on top of Mini Bike.

3. Remove bolts as indicated in photo
from both sides of metal frame

4. Carefully remove metal
packaging frame

1

Handlebar installation

1.

Remove cinch nuts and washers with rubber
grommets from steering bracket.

2.

Attatch handle bar assemly to steering bracket
by placing one washer and rubber grommet
on top of steering bracket and one washer and
rubber grommet under steering bracket (see
photos)

Cinch Nuts

Washers with rubber grommets 4ea.

Washer and rubber grommet
on top.

Steering bracket

3.

Torque cinch nuts to 45Nm (33ft.lbs.)

Make sure allen head bolts on top handle bar

4.
clamp are tight. Torque allen head bolts to
27Nm (20ft.lbs)

Washer and rubber grommet
on bottom.

Top handle bar clamp

2

Cinch Nut

Allen head bolts