Baja Motorsports CN90-U Assembly Guide

Set-up Instructions

WD90U-2/CN90U-2/WD90UR-2

ATV

Removal from crate

1. Remove cardboard carton from
metal frame.

2. Remove operating instructions,
manufacture statement of origin, and
owners manual located on top of ATV.

3. Carefully remove metal frame

1

REV.B

071707

Handlebar Assembly

4. Loosen plastic guard bolt and remove
plastic guard.

5. Loosen all bolts and lift handle bars to
desired position, tighten handle bar bolt.
Torque to 20 ft.lbs. Replace the plastic guard
and tighten bolt.

2

Front Wheels

Tab on steering
knuckle

Groove on
brake drum

6. Attach front brake drum to steering
knuckle. Align groove on brake drum with
tab on steering assembly.

Cotter pin

Washer

Castle nut

7. Attach front wheel to steering knuckle securing
with washer, castle nut. Torque nut to 35ft.lbs. Install
and cinch cotter pin.

3