Baja Motorsports BR150-1 Assembly Guide

BR150-1 Go-Kart Set Up Instructions

Removal from crate

1. Remove cardboard carton.

REV.A
062607

Hardware and parts

Rear wheels

Headrest

Wheel covers

Rear shock

Gas tank

Steering wheel

Front wheels

Steering wheel bolt cover

Hardware and parts

Rear luggage carrier

Brushguard D

Brushguard A

Brushguard B

Brushguard C

Brushguard F

Brushguard E

Steering Wheel assembly

2. Loosen 8mm bolts on steering shaft bracket
and align steering shaft. Once steering shaft
is aligned, torque bolts to 17 ft.lbs.

Align

3. Install steering wheel making sure large
opening is at top when steering is at center
position. Attach steering wheel with 6mm
bolts. Torque bolts to 8 ft.lbs. Attach bolt cover
to steering wheel, cover will snap in place.

Steering wheel
bolt cover

Front shock absorber attachment

4. Attach both front shock absorbers to top brackets on frame and
lower a-arm using M10X45 bolts and M10 nuts with 33ft.lbs. of torque.

A-arm attachment

Cotter pin

5. Attach upper and lower a-arms to left and right spindles using
M12 nuts with 35ft.lbs of torque. Secure nut with cotter pin.