Bailey Manufacturing Company Instruction Manual Instruction Manual

800 Series Training Stairs

Product Manual

Covers

Models:

805
806
807
808
809
810

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

0509C

Mail: P.O. Box 130, Lodi, OH 44254-0130

Shipments: 118 Lee St., Lodi, OH 44254

Important

Read This First

Bailey Manufacturing Company is proud of the
reputation we have earned as a leader in the
physical, occupational, and sports medicine industry
during the past 40 years. Our products are made
from the highest quality materials and built in the USA
by skilled craftsmen.

Prior to shipping, this product was thoroughly
inspected to ensure the highest quality standards and
your total satisfaction. If you experience any
problems, please follow the instructions outlined in
the Warranty & Support Section of this manual.
Contact either your dealer or Bailey at 1-800-321-

8372.

Please take a moment now and record the following
information for future reference:

Date of Purchase [delivery date]:

Bailey Dealer:

Packing Slip #:

Serial Number:
Date of Manufacture:
Model Number:

800 Series Training Stairs Page 3

Contents: Pages:

Product Section 4 thru 22

General Information 4

Parts 5 - 6

Product Identification 7

Assembly 8 - 20

Operation 21

Safety 21

Maintenance & Cleaning 22

Troubleshooting 22

Inspection & Service Logsheet 27

Warranty & Support Section 23 thru 26

Warranty Terms 23

Product Support & Assistance 24

Product Registration 25

Damage & Loss In Transit 25

Returns 26

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 4 800 Series Training Stairs

General Information:

Read entire Product Manual before assembling and using
this product. If you have any questions regarding the
following information, please contact a Bailey Customer
Service Representative at 1-800-321-8372.

Features & Specifications, Models 805, 806 & 807:

•

Convertible exercise stairs assemble as either straight
line or right angle configuration.

•

Available in three different inside widths: 24" [Model 805],
30" [Model 806] or 36" [Model 807].

•

Anti-slip safety treads on steps and platform.

•

Solid hardwood triple height handrails with steel uprights
allow use by both children and adults.

•

Handrail heights of 18.5", 27" and 35"; overall maximum
height 54", platform height 24".

•

Weight capacity, 500 lbs/227 Kg.

Features & Specifications, Model 808:

•

Straight single training staircase with platform, enclosed
on three sides; solid hardwood double height handrails
and uprights.

•

Includes Bus Step.

•

Handrail heights of 22" and 35".

•

Anti-slip safety treads on steps and platform.

•

Overall dimensions: 30" wide [inside], 55" long, 24" high
platform, 59.25" maximum height. Step risers 6" x 10".

•

Weight capacity 500 lbs/227 Kg..

Features & Specifications, Model 809:

•

Straight single training staircase with platform, solid
hardwood single height [28"] handrails and uprights.

•

Includes Bus Step.

•

Designed for low ceiling height clearance.

•

Anti-slip safety treads on steps and platform.

•

Overall dimensions: 30" wide [inside], 55" long, 12" high
platform, 40" maximum height. Step risers 4" x 10" and 6"
x 10".

•

Weight capacity 500 lbs/227 Kg.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 5

General Information [cont'd]:

Features & Specifications, Model 810:

•

Straight single training staircase with platform, solid
hardwood double height handrails and uprights.

•

Includes Bus Step.

•

Handrail heights of 21" and 34".

•

Anti-slip safety treads on steps and platform.

•

Overall dimensions: 36" wide [inside], 96" long, 24" high
platform, 59.25" maximum height. Step risers 6" x 10".

•

Weight capacity 500 lbs/227 Kg.

Parts:

Your new Stairs are shipped “knocked down”, with all
hardware and parts included for final assembly. Refer to
Figure 1 on page 7 for Model Identification. Inspect the unit
carefully, immediately upon removal from packaging, to
ensure that the unit is in good condition and all materials are
present before starting assembly.

Note: Bailey Manufacturing Company waives any
responsibility for concealed freight damage not reported
within five (5) days of receiving shipment. Refer to Product
Warranty and Support Section of this Manual for more
information.

The following parts are supplied with these Models:

Models 805, 806, 807:

•

(12) EA. Handrail Upright Post

•

(2) EA. Center Handrail

•

(2) EA. Short Handrail

•

(2) EA. Long Handrail

•

(40) EA. #1300 1/4 x 2 1/2 Hex Bolt

•

(24) EA. #1450 3/8 x 3 1/2 Hex Bolt

•

(4) EA. #2170 1/4 x 2 Carriage Bolt

•

(4) EA. #2540 1/4 Hex Nut

•

(40) EA. #2662 1/4 Domed Nut

•

(4) EA. #3581 1/4 SAE Flat Washer

[continued on page 6]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 6 800 Series Training Stairs

Parts [cont’d from page 5]:

Model 808 Training Stairs:

•

(1) EA. Bus Step Assembly

•

(6) EA. Handrail Upright Post

•

(1) EA. Rear Handrail

•

(2) EA. Center Handrail

•

(2) EA. Side Handrail

•

(4) EA. #1300 1/4 x 2 1/2 Hex Screw

•

(16) EA. #1310 1/4 x 2 3/4 Hex Screw

•

(12) EA. #1420 3/8 x 2 1/2 Hex Screw

•

(20) EA. #2662 1/4 Domed Nut

•

(20) EA. #3581 SAE 1/4 Flatwasher

•

(12) EA. #3610 SAE 3/8 Flatwasher

Model 809 Training Stairs:

•

(1) EA. Bus Step Assembly

•

(2) EA. Side Handrail Assembly

•

(16) EA. #1420 3/8 x 2 1/2 Hex Screw

•

(16) EA. #3600 3/8 Flatwasher

Model 810 Training Stairs:

•

(1) EA. Bus Step Assembly

•

(8) EA. Handrail Upright Post

•

(4) EA. End Handrail

•

(2) EA. Center Handrail

•

(24) EA. #1310 1/4 x 2 3/4” Hex Screw

•

(16) EA. #1420 3/8 x 2 1/2 Hex Screw

•

(4) EA. #2170 1/4 x 2 Carriage Bolt

•

(4) EA. #2540 1/4 Hex Nut

•

(24) EA. #2662 1/4 Domed Nut

•

(28) EA. #3581 1/4 SAE Flatwasher

•

(16) FT. #3610 3/8 SAE Flatwasher

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 7

Figure 1

Model 800 Series Training Stairs Identification

Models 805, 806 & 807

[shown in straight

configuration]

Model 810

[Straight Staircase]

Model 808

[Enclosed Staircase]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Model 809

[Low Staircase]

Page 8 800 Series Training Stairs

Assembly:

For Stair assembly, the following minimum tools are required:

•

7/16” wrench or socket

•

9/16” wrench or socket

Assembly & Layout Notes:

Assemble Stairs in the room where they will be used. All
Stairs have a platform height of 24", except the Model 809,
which has a platform height of 12". We recommend that all

24" platform Stairs be used only in rooms with a
minimum ceiling height of 10', or 120". This is to
minimize the possibility of patient or therapist contact
with the ceiling or any ceiling fixtures or obstructions.
The Model 809 has a recommended ceiling minimum
height of 9', or 108". The judgement of location suitability

must be made by those familiar with the building construction.

CAUTION: Handling and assembling large Stair
components should be done using at least two people.

Models 805, 806, 807 :

The Stairs may be assembled in either straight [Figure 2,
opposite page] or right angle [Figure 3, page 10]
configurations. Base Sections must be assembled on their
sides, on a protective surface such as cardboard or a
carpeted floor.

Fasten Base Sections together in four locations as shown in
Figure 2, opposite page [or Figure 3, page 10], using 1/4 x 2
Carriage Bolts, Flatwashers and Nuts. Ensure the Base
Sections are square and aligned with each other, then tighten
securely. Turn the assembled Base Section upright.

[continued on page 10]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 9

Figure 2

Model 805, 806, 807 Base Assembly

[shown in straight configuration]

Long Base Section

Platform Base Section

#2170 1/4-20 x 2"

Carriage Bolt

#3581 1/4 Flatwasher

#2540 1/4-20 Hex Nut

(4) EA

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 10 800 Series Training Stairs

Models 805, 806, 807 Assembly [Cont.'d]:

Lay out the Upright Posts on the floor near their install
locations. The Posts are marked with numbers for
identification, #1 through #12. The sides of the Base Section
are match marked with these number locations for each Post.
When installed, the Posts will cover these numbers. Install
Upright Posts to the sides of the Base Section as shown in
Figure 4, opposite page, using 3/8 x 3 1/2" Hex Bolts. Do not
fully tighten the bolts at this time. The Posts must be able
to move slightly.

[continued on page 11]

Figure 3

Model 805, 806 & 807 Base Assembly

[right angle configuration only]

#2170 1/4-20 x 2"

Carriage Bolt
#3581 1/4 Flatwasher
#2540 1/4-20 Hex Nut

(4) EA

Short Base

Section

Long Base Section

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Center Handrail Section

#4

#3

#1450

3/8-16 x 3 1/2"

Hex Bolt

(24) EA

800 Series Training Stairs Page 11

Figure 4

Model 805, 806, 807 Upright Post Assembly

[shown in straight Base configuration ]

#2

#1

#1450

3/8-16 x 3 1/2"

Hex Bolt

(24) EA

#3

#12

#4

#11

#5

#10

#9

#8

#6

Upright Posts

[shown with

match numbers]

#7

Models 805, 806, 807 Assembly [Cont.'d]:

If assembling a Right Angle configuration, the #3 and #4
Posts are located on the open Base side as shown in Figure
3, opposite page. Do not fully tighten the bolts at this
time. The Posts must be able to move slightly.

Lay out the Handrails on the floor near their install locations.
The Handrails are marked on the ends with numbers, to
correspond with the nearest Upright Post. When installed, the
Handrails will cover these numbers.

[continued on page 13]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 12 800 Series Training Stairs

Figure 5

Model 805, 806, 807 Handrail Assembly

Center Handrail Sections

(2) EA.

Short Handrail Sections

(2) EA.

#1310
1/4-20 x 2 3/4"
Hex Head Bolt

#2662

1/4-20 Domed Nut

(36) EA

#1300
1/4-20 x 2 1/2"
Hex Head Bolt

#2662

1/4-20 Domed Nut

(4) EA

Long Handrail Sections

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

(2) EA.

800 Series Training Stairs Page 13

Assembly [Cont.'d]:

Model 805, 806, 807 Assembly:

Starting with the Center Handrail sections, attach to the
Upright Posts as shown in Figure 5, opposite page, using 1/4
Hex Bolts and Domed Nuts.

Note: Install the Domed Nuts to the inside of the Handrails
as shown. Use a hammer to GENTLY insert Domed Nut, or
push with your thumb.

Do not fully tighten the bolts at this time. The Handrails
must be able to move slightly.

Attach all Handrail sections to Posts in the same manner.

Connect the Center Handrail sections to the adjoining
Handrails using the same Hex Bolts and Domed Nuts. Install
Domed Nuts on the slanted Handrail side to make wrench
access easier. Align Handrails to be straight and square to
each other, and tighten these Bolts securely.

Tighten all Handrail to Post Bolts first, then tighten all Post to
Base Bolts securely.

Check all components for proper alignment and fit. Loosen
and readjust as necessary. Review Operation and Safety
sections before placing unit into service.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 14 800 Series Training Stairs

Figure 6

Model 808 Upright Post Assembly

#1420
3/8-16 x 2 1/2"
Hex Head Bolt

#3610

3/8 SAE Flatwasher

(12) EA

#3

#2

#1

#4

#5

#6

Assembly:

Upright Post

Model 808:

With the Base Section upright, lay out the Upright Posts on
the floor near their install locations. The Posts are marked
with numbers for identification, #1 through #6. The sides of
the Base Section are match marked with these number
locations for each Post. When installed, the Posts will cover
these numbers. Install Upright Posts to the sides of the Base
Section as shown in Figure 6, above, using 3/8 x 2 1/2" Hex
Bolts and Flatwashers. Do not fully tighten the bolts at this
time. The Posts must be able to move slightly.

Lay out the Handrails on the floor near their install locations.
The Handrails are marked on the ends with numbers, to
correspond with the nearest Upright Post. When installed, the
Handrails will cover these numbers.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 15

Figure 7

Model 808 Rear Handrail Assembly

Rear Handrail Section

#4

#3

#2

Assembly [Cont.'d]:

#5

#1300
1/4-20 x 2 1/2"
Hex Head Bolt

#3581

1/4 SAE Flatwasher

#2662

1/4-20 Domed Nut

(4) EA

Model 808:

Starting with the Rear Handrail section, attach to the Upright
Posts as shown in Figure 7, above, using 1/4 x 2 1/2" Hex
Bolts, Flatwashers and Domed Nuts.

Note: Install the Domed Nuts to the inside of the Handrails
as shown. Use a hammer to GENTLY insert Domed Nut, or
push with your thumb.

Do not fully tighten the bolts at this time. The Handrails
must be able to move slightly.

Continuing with the Side Handrail sections, then the End
Handrail sections, attach to the Upright Posts as shown in
Figure 8, page 16, using 1/4 x 2 1/2" Hex Bolts, Flatwashers
and Domed Nuts. Do not fully tighten the bolts at this
time. The Handrails must be able to move slightly.

[continued on page 16]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 16 800 Series Training Stairs

Figure 8

Model 808 Handrail Assembly

Side Handrail Sections

#1310

1/4-20 x 2 3/4"
Hex Head Bolt

#3581

1/4 SAE Flatwasher

#2662

1/4-20 Domed Nut

(16) EA

End Handrail Sections

Assembly [Cont.'d]:

Model 808:

Align Rear and Side Handrails to be straight and square to
each other, and tighten the four Rear Handrail Bolts securely.

Align and tighten remaining Handrail to Posts Bolts next, then
tighten all Post to Base Bolts last.

Check all components for proper alignment and fit. Loosen
and readjust as necessary. Review Operation and Safety
sections before placing unit into service.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 17

Assembly [Cont’d]:

Model 809:

The Handrail assemblies are shipped with a brace that must
be removed prior to using the Stairs [see Figure 9, below].
Leave this brace attached until all fasteners are installed.

Align each Handrail Assembly to the Base section, and attach
using 3/8 x 2 1/2" Hex Bolts and 3/8 Flatwashers as shown.
Start each Bolt on each side, and do not tighten down
completely. Remove the screws holding the shipping and
assembly Brace to the bottom of the Handrail Posts. This
brace may then be discarded.

Tighten all Handrail to Base Bolts securely. Review Operation
and Safety sections before placing unit into service.

Figure 9

Model 809 Assembly

Handrail Assembly

Base

Section

#1420 3/8-16 x 2 1/2"

Hex Head Bolt

#3600 3/8 Flatwasher

(16) EA

Shipping & Assembly

Brace

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 18 800 Series Training Stairs

Figure 10

Model 810 Base Assembly

#2170 1/4-20 x 2" Carriage Bolt

#3581 1/4 Flatwasher
#2540 1/4-20 Hex Nut

(4) EA

Short Base

Section

Long Base

Section

Assembly [Cont’d]:

Model 810:

Base Sections must be assembled on their sides, on a
protective surface such as cardboard or a carpeted floor.

Fasten Base Sections together in four locations as shown in
Figure 10, above, using 1/4 x 2 Carriage Bolts, Flatwashers
and Nuts. Ensure the Base Sections are square and aligned
with each other, then tighten securely. Turn the assembled
Base Section upright.

Lay out the Upright Posts on the floor near their install
locations. The Posts are marked with numbers for
identification, #1 through #8. The sides of the Base Section
are match marked with these number locations for each Post.
When installed, the Posts will cover these numbers. Install
Upright Posts to the sides of the Base Section as shown in
Figure 11, opposite page, using 3/8 x 2 1/2" Hex Bolts and
Flatwashers. Do not fully tighten the bolts at this time.
The Posts must be able to move slightly.

[continued on page 19]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 19

Figure 11

Model 810 Upright Post Assembly

Upright Post

#1420 3/8-16 x 2 1/2"

Hex Head Bolt

#3610 3/8 SAE Flatwasher

(16) EA

#4

#3

#2

#8

#1

Assembled Base Sections

#7

#6

#5

Assembly [Cont’d]:

Model 810:

Starting with the Center Handrail sections, attach to the
Upright Posts as shown in Figure 5, opposite page, using 1/4
x 2 3/4" Hex Bolts and Domed Nuts.

Note: Install the Domed Nuts to the inside of the Handrails
as shown. Use a hammer to GENTLY insert Domed Nut, or
push with your thumb.

Do not fully tighten the bolts at this time. The Handrails
must be able to move slightly.

Attach all Handrail sections to Posts in the same manner.

[continued on page 20]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 20 800 Series Training Stairs

Assembly [Cont.'d]:

Model 810:

Connect the Center Handrail sections to the adjoining
Handrails using the same Hex Bolts and Domed Nuts. Install
Domed Nuts on the slanted Handrail side to make wrench
access easier. Align Handrails to be straight and square to
each other, and tighten these Bolts securely.

Tighten all Handrail to Post Bolts first, then tighten all Post to
Base Bolts securely.

Check all components for proper alignment and fit. Loosen
and readjust as necessary. Review Operation and Safety
sections before placing unit into service.

Figure 12

Model 810 Handrail Assembly

#1310 1/4-20 x 2 3/4"

Hex Head Bolt

Center Handrail Sections

#3581 1/4 SAE Flatwasher

#2662 1/4-20 Domed Nut

(24) EA

End Handrail Sections

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 21

Figure 13

Model 800 Bus Step Operation

Model 808, 809 or 810 Stairs

Bus Step

Lock Pin, open

Lock Pin, engaged

[one on each side]

Operation:

Model 800 Series Bus Step [Models 808, 809 and 810
Stairs only]:

Using the center handle recess in the front of the Bus Step,
lift and place it on the first step of the Stairs, which has the
Lock Pin installed on each side. Lock the Bus Step in place
by inserting the Lock Pins through the Lock Blocks and into
the hole in each side of the Bus Step.

Safety:

Be safe! All Bailey Stairs are equipped with anti-slip tread
surfaces, and are designed for safety and ease of use.
Periodically check and retighten fasteners on Posts and
Handrails as necessary.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 22 800 Series Training Stairs

Maintenance & Cleaning:

Regularly inspect components for wear and proper
adjustment. Should the unit need attention, remove from
service until the unit is returned to its original condition. A
convenient Inspection and Service Logsheet is provided on
page 27 for recordkeeping.

To help keep your product in good condition, clean as
required using abrasive free and solvent free products. Test
any cleaner or disinfectant on a small, inconspicuous location
before using. Discontinue use if surface softens, discolors, or
loses gloss.

Never use any cleaners or disinfectants containing harsh
solvents on product surfaces. Check their Material Safety
Data Sheet and consult the manufacturer with any questions.
Some chemicals will severely shorten the life of your plastic
parts and lacquer coated wood finishes.

For light soiling, we recommend liquid dish soap and water,
or liquid cleanser and water applied sparingly with a soft
bristle brush. For difficult stains or disinfection, use a solution
of 10% household bleach [sodium hypochlorite] and 90%
water applied sparingly with a soft white cloth. Rinse with
water dampened cloth to remove any remaining soap,
cleanser or bleach solution.

Troubleshooting:

Your new Training Stairs will provide years of reliable service.
In the event the device does not function correctly, inspect all
components for tightness and proper condition.

For detailed information or component replacement, contact
Bailey Customer Service at the number on this page. Have

your date of purchase and Bailey Dealer information
handy for faster service.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 23

Five Year Limited Warranty:

Bailey Manufacturing Company warrants the products we
manufacture to be free of defects in materials, workmanship,
or design under normal use and service conditions for five
years after the date of original purchase (two years for Bailey
Basics). Resale products and components manufactured by
others will carry the warranty of the manufacturer. If the
product and/or equipment should become defective within the
designated warranty period, Bailey Manufacturing Company
will repair or replace it (at our option) free of charge, including
return transportation to you, provided you deliver the
equipment or product prepaid to Bailey Manufacturing
Company at 118 Lee Street, Lodi, Ohio 44254. Please
receive “authorization” before returning product to the factory,
as Bailey Manufacturing Company will not accept collect
shipments. Bailey Manufacturing Company reserves the right
to repair or replace component parts without return of the
entire unit.

This warranty does not include damage resulting from
accident, abuse, or misuse of the product and expressly
excludes normal wearing of parts or defect caused by
transportation, accident, fire, flood, alteration, or negligence.

Bailey’s warranty liability is limited to that stated above; other
than the warranty stated above, there are no warranties
expressed or implied. Bailey will have no responsibility for
consequential or incidental damages.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 24 800 Series Training Stairs

Product Support:

Bailey Manufacturing Company is totally committed to
producing the finest quality physical, occupational, and sports
medicine products. Our goal is your total satisfaction. If you
experience any problems, please feel free to contact a Bailey
Customer Service Representative at 1-800-321-8372
between the hours of 8:30 AM and 4:30 PM Eastern Time
weekdays.

The following information is provided to help ensure that your
experience with Bailey is a positive one. Please read this
information carefully before you unpack or begin assembly.

If You Need Assistance:

To provide the best possible service to our customers and
dealers, warranty claims should be made directly to Bailey.
Since Bailey is in the best position to solve the customer’s
problem, it will speed up the process and help ensure total
customer satisfaction. Should you encounter any problem
with our products or services, please contact a Bailey
Customer Service Representative at 1-800-321-8372
between the hours of 8:30 AM and 4:30 PM Eastern Time,
weekdays. Please have the date of purchase and Bailey
dealer information recorded inside the front cover of this
manual, or a copy of your packing list available to help our
customer service representative provide you with the fastest
service. In most cases, you will also want to notify your dealer
to enable them to provide any further assistance.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 25

Registration:

Product registration will be accomplished through the use of
the enclosed Product Registration Form. Please take time to
complete this Form and return it to Bailey. We also ask that
you answer a few simple questions concerning our products
and services. Our goal is your total satisfaction, and this
information will be used to improve our products and services
for you...the customer. Please take a moment to record your

purchase inside the front cover of this manual. Note the date
and the name of your Bailey dealer.

Damage or Loss in Transit:

All of our equipment is thoroughly inspected and carefully
packed before leaving our plant. It is receipted for by the
carrier as having been shipped in good condition. Any loss or
damage which occurs to the equipment in route will be solely
through negligence of the carrier and all claims must be filed
directly with the carrier. Important; If a shipment is delivered
to you in a visibly damaged condition or in a quantity that is
less than is enumerated on the Bill of Lading or delivery
receipt, insist on a notation of this damage or shortage by the
delivering carrier’s agent on the delivery receipt or freight bill.
When a shipment has been delivered to you in apparent good
condition, but upon opening the containers or crate, damage
is discovered, notify the delivering carrier immediately upon
discovery. This notification must be made within 5 days of
receipt of the shipment. Insist upon an inspection and
inspection report. You must retain all packaging, including the
carton or crate in which the damaged item was shipped, until
inspection has been made. All claims must be made by you,
the consignee, directly to the carrier or its agents.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Page 26 800 Series Training Stairs

Returns:

Merchandise to be returned must have proper authorization.
Please contact your dealer for assistance with this procedure.
A reference (return authorization or RA) number is to be
clearly marked on all cartons and correspondence. Freight
charges are to be prepaid, as collect shipments are not
accepted. Items must be in the original packaging and
returned within 30 days of the invoice date. Returns that are
not the result of a warranty claim are subject to a restocking
fee of 20% to cover inspection and handling. Any damage
due to use, mishandling, or improper packing of the return will
be noted and deducted from the credit issued. Special order
items may not be returned for credit. Bailey Customer Service
Representatives will complete a “Returned Merchandise
Information” form to clearly identify all information concerning
the returned merchandise.

Specifications:

Due to continuous improvements in design, materials, and
construction techniques, specifications in the Bailey catalog
are subject to change without notice. In all cases, the
equipment shipped will be of equal or superior quality. Bailey
Manufacturing Company also reserves the right to
discontinue the manufacture of any product at such time as
we consider necessary.

Customer Service:

When service is required, it is nearly impossible to place a
value on it. For that reason we have an extremely competent
Customer Service Department available to assist you with
answers to your questions or recommendations in your
planning process. In the unlikely event that a product may be
in need of repair, our staff will assist with prompt identification
of the required replacement part. Have the date of purchase
and the name of your Bailey dealer handy for reference.
Please contact us at 1-800-321-8372 between the hours of
8:30 AM and 4:30 PM Eastern Time weekdays for
assistance.

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

800 Series Training Stairs Page 27

Inspection & Service Logsheet

DATE BY DESCRIPTION

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

BAILEY MANUFACTURING COMPANY

800-321-8372 • FAX: [phone]

Mail: P.O. Box 130, Lodi, OH 44254-0130

Shipments: 118 Lee St., Lodi, OH 44254