Nova-436 Outdoor LTE TDD Base Station Installation Guide
Date
Version
Description
30 Oct, 2017
01
Initial Released.
16 Jan, 2018
02
Optimize descriptions and fix some bugs.
About This Document
This document is a guidance of Nova-436 hardware installation for installation
personnel, including the preparation of installation tools and supporting materials,
the demands for installation environment, installation procedure, cable connection
and power on.
Accomplish the installation of the device according to this guide, the installation
personnel can avoid potential damage to the device during the installation
procedure, which makes sure the subsequent good running of the device.
This document is suitable for model mBS2130.
Copyright Notice
Baicells copyrights this specification. No part of this specification may be reproduced in
any form or means, without the prior written consent of Baicells.
Disclaimer
This specification is preliminary and is subject to change at any time without notice.
Baicells assumes no responsibility for any errors contained herein. For more information,
please consult our technical engineers.
Disposal of Electronic and Electrical Waste
Pursuant to the WEEE EU Directive, electronic and electrical waste must not
be disposed of with unsorted waste. Please contact your local recycling
authority for disposal of this product.
Revision Record
Contact Us
Baicells Technologies Co., Ltd.
Address: 3F, Bldg A, No.1 Kai Tuo Rd., Haidian Dist., Beijing, PR China, 100085
E-mail: support_cn@baicells.com/support_na@baicells.com
Tel: 400-612-0167
Fax: +86-10-62607100
Nova-436 Outdoor LTE TDD Base Station Installation Guide
Nova-436 Outdoor LTE TDD Base Station Installation Guide
1. Product Overview
Introduction 1.1
Baicells Nova-436 is a high performance outdoor 3.5GHz micro base station based on
LTE TDD technology, which is developed by Baicells. The Nova-436 supports wired
backhaul connections to backbone networks, and provides LTE access to user terminals,
implemented voice and data service transmissions.
The Nova-436 makes use of the current transmission resources to reduce the
operator’s investment, implement the low-cost construction of LTE networks and
enhance indoor coverage, thereby providing high-speed broadband access for
users in assembly occupations.
The Nova-436 can be widely used by telecom operators, broadband operators,
enterprises, and so on.
Features 1.2
Adopt the integration design of baseband and RF.
Citizens Broadband Radio Service (CBRS) band covers with dual carrier.
Based on 3GPP international standard TDD LTE technology; provide high speed
data service; support a maximum transfer rate of DL: 224Mbit/s, UL: 14Mbit/s with
2*20MHz spectrum.
Support flexible uplink and downlink time slot ratio: 1(2:2), 2(1:3), and high speed
data transmission.
Support 10MHz/20MHz operation bandwidth.
Support four ports antenna or two antennae with two ports.
Support copper (RJ-45) and optical port backhaul, flexible to deploy.
Security services to provide timely protection against potential security risks and
illegal intrusion.
Support simple and convenient local and remote web management.
Integration as required, easy to installation and deployment, accurate
coverage and improved network capacity.
Support network management functions, which includes the management,
monitoring and maintenance.
1
Nova-436 Outdoor LTE TDD Base Station Installation Guide
Appearance 1.3
The Nova-436 base station appearance is shown in Figure 1-1.
Figure 1-1 Nova-436 Appearance
The Nova-436 interfaces and indicators are shown in Figure 1-2.
Figure 1-2 Nova-436 Interfaces and Indicators
2
Nova-436 Outdoor LTE TDD Base Station Installation Guide
Interface Name
Description
PWR
Power interface: -48V (-60V to -42V) DC
GPS
External GPS antenna, N-female connector.
ANT0
External antenna 0, N-female connector.
ANT1
External antenna 1, N-female connector.
ANT2
External antenna 2, N-female connector.
ANT3
External antenna 3, N-female connector.
OPT
Optical interface, connect to external transmission network,
used for data backhaul.
ETH
RJ-45 interface, used for debug or data backhaul.
Identity
Color
Status
Description
PWR
Green
Steady On
Power On
OFF
No Power Supply
CELL2
Green
Fast flash: 0.125s
on,0.125s off
CELL 2 inactivated
Slow flash: 1s on,1s off
CELL 2 activated
CELL1
Green
Fast flash: 0.125s
on,0.125s off
CELL 1 inactivated
Slow flash: 1s on,1s off
CELL 1 activated
ALM
Red
Steady On
Hardware alarm, e.g. VSWR alarm
OFF
No alarm
Item
Description
LTE Mode
LTE TDD
LTE Frequency
3650 MHz to 3700 MHz
Channel Bandwidth
10MHz, 20MHz on each carrier
Output Power
30 dBm@antenna
Receive Sensitivity
-100 dBm
The Nova-436 interfaces are described in Table 1-1.
Table 1-1 Nova-436 Interface Description
The Nova-436 interface indicators are described in Table 1-2.
Table 1-2 Nova-436 Interface Indicators
Technical Specification 1.4
1.4.1 Hardware Specification
3
Nova-436 Outdoor LTE TDD Base Station Installation Guide
Item
Description
Synchronization
GPS, 1588 V2
Backhaul
1 Optical (SFP) and 1 RJ-45 Ethernet interface (1 GE)
MIMO
DL 2 x 2 on each carrier
Dimension
310mm(H) x 239 mm(W) x 105 mm(D)
Installation Type
Pole, wall
Antenna
External high gain antenna
Overall Power
< 60 W
Power
48V DC, AC adaptor (multi-national standards)
Weight
About 5.5kg
Item
Description
LTE Standard
3GPP Release 12
Peak Rate
2*20 MHz:
SA1: DL 80 Mbps, UL 28 Mbps (per cell)
SA2: DL 110 Mbps, UL 14 Mbps (per cell)
2*10MHz:
SA1: DL 40 Mbps, UL 14 Mbps (per cell)
SA2: DL 55 Mbps, UL 7 Mbps (per cell)
User Capacity
96 concurrent users per cell/carrier
192 concurrent users per eNodeB
Modulation
UL: QPSK, 16QAM, 64QAM
DL: QPSK, 16QAM, 64QAM
Voice Solution
CSFB, VoLTE, eSRVCC
Traffic Offload
(optional)
LIPA (Local IP Access)
SIPTO (Selected IP Traffic Offload)