This document introduces the specifications of Baicells EG7035E-M11 CPE and guides
users to install and configure it.
Copyright Notice
Baicells copyrights this specification. No part of this specification may be reproduced in
any form or means, without the prior written consent of Baicells.
Disclaimer
This specification is preliminary and is subject to change at any time without notice.
Baicells assumes no responsibility for any errors contained herein. For more information,
please consult our technical engineers.
Revision Record
Contact Us
Baicells Technologies Co., Ltd.North America
Address: 555 Republic Drive, Suite 200 Plano, TX 75074
E-mail: support_na@baicells.com
Phone: +1-972-800-1157
Website: http://www.baicells.com/
Table 3-1 Support Materials for Installing ..................................................................... 8
1. Product Overview
1.1Introduction
Baicells is a high-tech company dedicated in wireless broadband access solutions and
service operation. With the advent of the Internet+ era, the development of WBB is
imminent. Through continuous innovation, Baicells launches the world first mobile
broadband system based on the Internet architecture and unlicensed spectrum. Baicells
can provide series CPEs, include indoor and outdoor unit on different spectrums.
Baicells EG7035E-M11 is a high performance outdoor CPE. The EG7035E-M11 has the
superior wireless access performance and comprehensive routing capabilities, which
have the abilities to bring the end-users WBB services.
1.2Features
The EG7035E-M11 is designed according to the simplicity principle, which can evolve in a
short period and realize fast customization, delivery and deployment as well. The main
features of the EG7035E-M11 is as follows:
Support TD-LTE network according to the operator’s choice.
LTE TDD 3400MHz ~ 3800MHz
Support the 100Mbps Ethernet interface.
Intuitionist and convenient Web-based management.
Built-in LTE bipolar directional high gain antenna.
Support TR069 and OMA-DM network management protocol.
Support cell lock, SIM lock, and Pin lock.
User-friendly design of LED indicator.
Power supply with PoE.
Support pole installation or wall mounting.
1.3Appearance
The EG7035E-M11 appearance is shown in Figure 1-1.
1
Interface & Button
Description
PoE
Connected to the PoE power adapter
SD slot
Support SD card
USIM Slot
Support 1.8V/3.0V USIM 2FF
Restore Button
Long press over 10 seconds to restore the factory settings
Figure 1-1 EG7035E-M11 Appearance
The EG7035E-M11 interfaces and buttons are shown in Figure 1-2.
Figure 1-2 Interface and Button of EG7035E-M11
The EG7035E-M11 interface and button description is given in Table 1-1.
Table 1-1 Description of EG7035E-M11 Interface and Button
2
Interface & Button
Description
LED Indicator
LTE signal strength Indicator& status indicator
GND
Connected to Earth by conductor
Identity
Description
Color
Status
Description
MIU
-
Yellow
OFF
Reserved.
Steady On
Reserved.
Blanking
Reserved.
LTE
Network state
Indicator
Blue
OFF
LTE disconnected.
Steady On
LTE connected.
SIM
SIM card status
indicator
Yellow
Steady On
The SIM card is normal.
Blanking
The SIM card is abnormal or not
inserted.
LAN
100Mbps Eth
Indication
Yellow
OFF
Ethernet connection does not
established.
Steady On
Ethernet connection is normal.
Blanking
Data is transmitting.
PWR
Power Indicator
Yellow
OFF
No Power Supply
Steady On
Power On
The LED indicators are shown in Figure 1-3.
Figure 1-3 LED Indicators of EG7035E-M11
The description of LED indicators are given in Table 1-2.
Table 1-2 LED Indicator Description
3
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.