Nova-243 Outdoor LTE TDD Base Station Installation Guide
About This Document
This document is a guidance of Nova-243 hardware installation for installation
personnel, including the preparation of installation tools and supporting materials,
the demands for installation environment, installation procedure, cable connection
and power on.
Accomplish the installation of the device according to this guide, the installation
personnel can avoid potential damage to the device during the installation procedure,
which makes sure the subsequent good running of the device.
This document suit for the models of BRU35xx series base station.
Copyright Notice
Baicells copyrights this specification. No part of this specification may be reproduced in
any form or means, without the prior written consent of Baicells.
Disclaimer
This specification is preliminary and is subject to change at any time without notice.
Baicells assumes no responsibility for any errors contained herein. For more information,
please consult our technical engineers.
Disposal of Electronic and Electrical Waste
Pursuant to the WEEE EU Directive, electronic and electrical waste must not
be disposed of with unsorted waste. Please contact your local recycling
authority for disposal of this product.
Exclamation Mark
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio
equipment will be subject to some restrictions when placed on the market
Nova-243 Outdoor LTE TDD Base Station Installation Guide
Date
Version
Description
10 Aug, 2016
01
Initial Released.
16 Jan, 2018
02
Optimize descriptions and fix some bugs.
4 Apr, 2018
03
Fix bugs.
Revision Record
Contact Us
Baicells Technologies Co., Ltd.
Address: 3F, Bldg A, No.1 Kai Tuo Rd., Haidian Dist., Beijing, PR China, 100085
E-mail: support_cn@baicells.com/support_na@baicells.com
Tel: 400-612-0167
Fax: +86-10-62607100
Website: http://www.baicells.com/
Nova-243 Outdoor LTE TDD Base Station Installation Guide
Nova-243 Outdoor LTE TDD Base Station Installation Guide
1. Product Overview
Introduction 1.1
Baicells Nova-243 is high performance outdoor micro base station based on LTE TDD
technology, which is developed by Baicells. The Nova-243 supports wired backhaul
connections to backbone networks, and provides LTE access to user terminals,
implemented voice and data service transmissions.
The Nova-243 makes use of the current transmission resources to reduce the
operator’s investment, and implement the low-cost construction of LTE networks,
providing high-speed broadband access for subscribers.
The Nova-243 can be widely used by telecom operators, broadband operators,
enterprises, government, police security, and so on.
Features 1.2
Adopt the integration design of baseband and RF.
Based on 3GPP international standard LTE-TDD technology; provide high speed data
service; support peak rate of DL: 110Mbit/s, UL: 14Mbit/s with 20MHz spectrum.
Support flexible uplink and downlink time slot ratio: 1(2:2), 2(1:3), and high speed
data transmission.
Support 5MHz/10MHz/15MHz/20MHz operation bandwidth.
Support copper (RJ-45) and optical port backhaul, flexible to deploy.
Security services to provide timely protection against potential security risks and
illegal intrusion.
Support simple and convenient local and remote web management.
Integration as required, easy to installation and deployment, accurate
coverage and improved network capacity.
Support network management functions, which includes the management, monitoring
and maintenance.
1
Nova-243 Outdoor LTE TDD Base Station Installation Guide
Appearance 1.3
The Nova-243 base station appearance is shown in Figure 1-1.
Figure 1-1 Nova-243 Appearance
The Nova-243 interfaces and indicators are shown in Figure 1-2.
Figure 1-2 Nova-243 Interfaces and Indicators
2
Nova-243 Outdoor LTE TDD Base Station Installation Guide
Interface Name
Description
ETH0
RJ-45 electronic interface, support 10M/100M/1000M
self-adaptation, external transmission network.
ETH1
RJ-45 electric interface, used for debugging.
SNF
External Sniffer, Type N interface
ANT0
External antenna 1,Type N interface
ANT1
External antenna 2,Type N interface
GPS
External GPS antenna, Type N interface
PWR
Power interface: -48V DC (-36V~-60V)
Identity
Color
Status
Description
RUN
Green
Fast flash: 0.125s
on,0.125s off
The board is loading.
Slow flash: 1s on,1s off
The board is normal.
OFF
No power input or board fault
ALM
Red
Steady On
Hardware alarm, e.g. VSWR alarm
OFF
No alarm
ACT
Green
Steady On
The cell has been activated.
OFF
The cell has not been activated.
VSWR
Red
OFF
The standing wave is normal.
Steady On
The standing wave is large than
normal.
Item
Description
LTE Mode
LTE TDD
LTE Bands
BRU3501: 3650MHz~3700MHz for FCC application
3550MHz~3700MHz for IC application
BRU3508: 2300MHz~2370MHz
BRU3509: 2300MHz~2320MHz
The Nova-243 interfaces are described in Table 1-1.
Table 1-1 Nova-243 Interface Description
The Nova-243 interface indicators are described in Table 1-2.
Table 1-2 Nova-243 Interface Indicators
Technical Specification 1.4
1.4.1 Hardware Specification
3
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.