Bag End M6 Specifications
ACOUSTIC AND ELECTRICAL
Enclosure:
3/4" MDF
Transducers:
6" Low frequency cone
1" Coaxially mounted
Neodymium tweeter
Input Connectors:
5-way binding posts
Grille:
Black nylon cloth over wood
frame
Optional Hardware:
Wall mount bracket
SYSTEM COMPONENTS
PHYSICAL
Finish:
Black textured paint
Dimensions:
14"h x 9"w x 9"d
36 cm x 23 cm x 23 cm
Weight:
15 lbs.
7 kg
Shipping Dimensions:
24" x 16" x 14"
61 cm x 41 cm x 36 cm
Shipping Weight:
20 lbs.
9 kg
M-6 TIME-ALIGN
®
BAG END
SPECIFICATIONS
APPLICATIONS:
Recording Studio Monitor
Film & Video Post Production
Laboratory Reference Monitor
Mastering Facility
Broadcast Monitor
System Type:
2-way coaxial, sealed 0.4 ft
3
Impedance:
8 Ω
Crossover Network:
Passive Time-Align
®
equalizer
filter @ 3.5 kHz
Time Offset Between Drivers:
< ± 25 Microseconds
300Hz to 10kHz
Frequency Response:
60 Hz to 20 kHz ±3 dB
(4π Steradians)
M-6
The M-6 is a 6-inch, 2-way coaxial, Time-Aligned™ loudspeaker system designed for critical near field studio monitoring
applications. Designed as a Near field Monitor™ the M-6 of fers
accurate time and frequency information within the near field listening area. Despite its small size it has high acoustic output
and unsurpassed clarity and resolution of detail. Attachment
points are provided for Bag End mounting bracket (BRKT-1) and
other popular mounting hardware.
About T
ime-Align® Time-Align®assures that the fundamental
and overtones of a complex, transient, acoustical signal are presented to the listener in the same relationship as the electrical
signal at the input terminals of the loudspeaker.
The conventional loudspeaker spreads out the sound in time:
when a rapid series of transients occur the results are blurring
and lost detail. With Time-Align
®
, a transient is presented as a
tight package of energy, with the same time relationships as the
natural sound. This means that a rapid series of transients will
be heard clearly.
True Time-Alignment™ requires much more than just physically
lining up the loudspeaker components. It requires consideration
of the driver placement, driver delay and adjustment of the
crossover delay parameters. This achieves the precise simultaneous acoustical arrival time of each driver throughout the
crossover region.
Along with state-of-the-art laborator y instruments, the proprietary Time-Align
®
generator, built by Ron Wickersham, is used in
designing our loudspeaker systems. The Time-Align
®
generator is
founded upon dif ferent underlying mathematical principles than
are used in the more common Fourier based measurement
equipment.
When comparing a genuine BAG END Time-Aligned™ speaker
system to any other, our additional design work is easy to hear
and appreciate. The dramatic clarity, realism, and overall pleasant sound of our Time-Aligned™ loudspeakers is noted throughout the world.
Time-Align®, Time-Aligned™, Time-Alignment™, NFM™, and Near field Monitor™ are trademarks of E.M. Long Associates.
BAG END Loudspeakers
22272 Pepper Road
Barrington, Illinois
60010 USA
Voice 847 382 4550
Fax 847 382 4551
www.bagend.com
Sensitivity:
87 dB SPL (1W @ 1m)
Distortion:
Less than 3% THD or IMD
(94 dB SPL @ 1m)
Polarity:
A positive asymmetrical signal
applied to the red input terminal will result in a positive
asymmetrical acoustical output.
Power Handling:
90 W continuous sine wave
360 W instantaneous peak
Loading...