Page 1
Express 240 Cart
•
No tools required for assembly
Assembling and Using Your
Bag Boy Express 240 Cart
Folding you cart
Printed in China
1. a) Flip the front wheel release lever on the side of the front hub open by moving it
towards the ground (the rounded surface will face out when open)
b) Rotate the wheel into the fully folded position between the main lower frame tubes
and close the release lever again.
2. a) Push the handle adjustment button while holding the handle by the grip.
b)
Rotate the handle down towards the rear wheels slowly until the handle is fully
collapsed and rests on the rear wheels.
a b
a b
dynamicbrands.org
Customer Service: 1-800-955-2269
customerservice@bagboyllc.com
bagboycompany.com
Limited 1 year Warranty
POLICY: The Bag Boy Company provides the original retail purchaser of each new Bag Boy cart a limited 1 year warranty against
defects in materials and workmanship for the cart frame and cart wheels when purchased from an authorized Bag Boy dealer. Some
degradation of the product is considered wear and tear, so warranty coverage on some items may require evaluation from Bag Boy
staff.
REMEDY: This warranty is expressly limited to the repair or replacement of a defective frame, wheel, or part and is the sole remedy
of the warranty. This warranty applies only to the original owner and is not transferable. Claims under this warranty must be made
through Bag Boy Customer Service. Proof of purchase is required. A warranty registration card must be completed and received by The
Bag Boy Company before a warranty claim can be processed. Warranty remedies are subject to depreciation based on age and use of
the cart.
EXCLUSIONS: Improper assembly or follow-up maintenance voids the warranty. This warranty also does not cover damage from normal
wear and tear, installation of parts or accessories not originally intended or compatible with the cart as sold, damage or failure due to
accident, misuse or neglect, or modification of the frame, wheels or components. Labor charges for parts changeovers are not covered
by the warranty. Additionally, this warranty does not cover damage associated with commercial use, competition, or lack of technical
skill of the user.
LIABILITY LIMITATION: The Bag Boy Company shall not be responsible for incidental or consequential damages including damages for
personal injury, property damage or economic losses. Some states do not allow the exclusion of incidental or consequential damages,
so the above exclusion may not apply to you. This warranty gives the consumer specific legal rights, and those rights may vary from
place to place. This warranty does not affect the statutory rights of the consumer.
“NO FAULT” WARRANTY: If your Bag Boy cart is damaged in a way not covered by the foregoing warranty- an accident, for example –
The Bag Boy Company will work with you to replace it at a reduced cost. Please check with Bag Boy Customer Service staff regarding
the latest pricing, policy guidelines and produce availability. Any cart sold through this program requires that the damaged product
be returned to The Bag Boy Company before the replacement item is shipped unless otherwise instructed. Please be aware that any
shipping and/or labor costs are not covered as part of this program.
Repair and Warranty Parts Availability
Time Period: The Bag Boy Company will stock its choice of replacement warranty and repair parts for a given model during the years it
remains in current circulation and for 3 years post it’s retirement from active status. In many cases stock of many replacement items
will extend beyond this period, but no guarantees are made beyond the contract dates. The Bag Boy Company, at its discretion, may
offer replacement product in cases where the needed repair parts are not readily available. This offer is not an absolute, but we will act
in good faith to remedy customer difficulties in a timely manner.
Scope: The Bag Boy Company will stock normal replacement items based on product average usage data. The range of parts offered
may vary from model to model as needs dictate. The range of parts may be altered within a product’s life if unpredicted needs arise.
Updated 05/20/08
Contact Us
Page 2
Assembling Your New Bag Boy Express 240
•
No tools required for assembly
1. Remove cart from carton and check that the
following items are included:
•Cartframe
•Frontwheelwithfork
•(2)side/rearwheels
•Allenwrench
4. a) Unfold the main cart frame by lifting the handle and moving the handle into the desired
position while the handle release button (b) is pressed
.
**The handle is designed to be adjusted to each individual’s preference. There are 5 positions
for the handle height.
To engage the parking brake, rotate the hand brake lever mounted on the handle (a) towards
the ground. The brake pin will extend into the brake ribs on the rear wheel. If you brake
becomes inoperable, you can adjust the tension by turning the lever barrel adjuster counterclockwise to tighten wire tension. If your brake is too tight when first operated, loosen the
barren adjuster by turning clockwise until lever can easily move into both on and off positions.
2. a) Attach the side wheels by inserting the axle of the wheel into the cart wheel hub
while the release lever is in the open position.
b) Close the release latch to secure the wheel and repeat on alternate side.
3. a) Insert the front fork and wheel assembly as pictured.
b) Close the release lever on the lower side of the hub to secure the fork assembly.
**The fork and wheel do not need to be removed to fold or store the cart, it was
designed this way to facilitate more compact packaging and storage when needed.
If your cart does not track straight you can easily align the wheel by following the
steps below:
1. Stand in front of the car and locate the 2 alignment screws in the front tips of each
fork leg. (a)
2. Using the allen wrench provided, turn the alignment screw to direct the wheel as
needed. (b)
**If your cart pulls to the left, tighten the right screw by turning it clockwise. If it pulls to
the right, tighten the left screw.
***If you find the screw too tight to fully adjust the wheel as desired, loosen both screws
to their stopping point and begin the process again. This will allow for a full range
of adjustment.
First cart use-assembling your cart
Hand operated parking brake
a b
a
b
a b
a b
Loading...