BAFO BF-7351 User Manual

USB 2.0

USB 2.0

External Card Reader

External Card Reader

(Single-Slot)

(Single-Slot)

User's GuideUser's Guide

INDEX

Introduction

Installation Guide

Setup for Windows

Setup for Mac OS

Troubleshooting

Specifications

Introduction

Features

Features

Thank you for purchasing USB 2.0 Card Reader. The
USB 2.0 Card Reader utilizes USB 2.0 interface to
bring you convenient and high-speed access to
storage card; and supports Mass Storage Class Drive,
no additional driver needed in Windows ME/2000/XP,
Mac OS 9 / X, and Linux.

Depending on their respective design, the USB 2.0
card Reader supports 3.3V SmartMedia Card, Type
I&II CompactFlash Card/Microdrive, SecureDigital/
MultiMedia Card, and Memory Stick.

The USB 2.0 Card Reader is an easy-to-use digital
device companion product, it can transfer data to your
desktop PC or mobile computer rapidly, and therefore
it can save your valuable time and boost the speed
when acquiring more data in a few seconds.

1

Introduction

Primary features of the USB 2.0 Card Reader include:
* USB 2.0/1.1 interface; access speed reaches 480 Mb/s.
* USB bus powered. AC power adapter is not required.
* Supports Hot-Swapping and Mass Storage Class Drive; no

additional driver needed under Windows ME/2000//XP,

MacOS 9/X, and Linux(requires editing kernel code).
* With POWER and ACCESS LED indicator.
* Supports for storage cards including:

CF Reader: Type I&II CompactFlash Card / Microdrive
SM Reader: 3.3V SmartMedia Card
SD Reader: SecureDigital Card / MultiMedia Card
MS Reader: Memory Stick
4-in-1 Reader: 3.3V SM/SD/MMC/MS
6-in-1 Reader: 3.3V SM/Type I&II CF/IBM Microdrive/

SD/MMC/MS

* Supports for operating systems including:

Windows 98/98SE/ME/2000/XP
Mac OS 8.6 or later versions
Linux(kernel code 2.4.0 or later versions)

Features

2

Introduction

Package Contents

Package Contents

In the package of USB 2.0 Card Reader you will find
following items. Please contact your local dealer if
there are any shortages.

* USB 2.0 Card Reader X 1

* Setup Disc X 1

* USB Cable X 1

3

Introduction

System Requirements

System Requirements

PC Hardware

IBM PC compatible computer with USB 2.0/1.1 support

Software

Microsoft Windows 98/98SE/ME/2000/XP
Linux(kernel code 2.4.0 or later versions)

Mac Hardware

iMac series
iBook series
Power Mac G4 series
Power Book with USB support
Power Mac G3 with USB support

Software

Mac OS 8.6 or later versions
iMac series require iMac Firmware 3.0 or later versions

4

Introduction

Sockets

Sockets

CF Reader

SM Reader
SD Reader SD Socket SecureDigital/MultiMedia Card
MS Reader MS Socket Memory Stick
4-in-1 Reader *4-in-1 Socket

6-in-1 Reader *6-in-1 Socket Type I&II CompactFlash

* The unique 4-in-1/6-in-1 Socket applies to 4/6 kinds of card. Insert one card
once. if you have problem of inserting the card, please do not push and
enforce the card into the socket; just lightly move and push the card or turn
the card over and insert it again.

CF Socket Type I/II CompactFlash Card

IBM Microdrive

SM Socket 3.3V SmartMedia Card

3.3V SmartMedia Card
SecureDigital Card/
MultiMedia Card
Memory Stick

IBM Microdrive

3.3V SmartMedia Card
SecureDigital Card/
MultiMedia Card
Memory Stick

5

Introduction

Indicator

Indicator

An active LED indicator is used to display operation status
of your USB 2.0 Card Reader. The LED lighting means the
reader is connected to system and the power is on. The
LED flashing means the reader is reading or writing data in
inserted cards.

WARNING!

Do not insert or extract storage card while the LED is
flashing. Besides, storage card must be taken off
before insertion or removal of the card reader.

6