Badger Meter B132-050, B131-038, B131-075, B131-050, B131-100 Standard User Manual

Turbine Flow Meter

QuikSert® Standard

TRB-UM-00372-EN-06 (October 2018)

User Manual

Turbine Flow Meter, QuikSert® Standard

CONTENTS

Scope of This Manual � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3

Unpacking and Inspection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3

Safety � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3

Terminology and Symbols � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4

Operating Principle � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4

Installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5

Operational Startup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7

Calibration � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7

Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �8

Part Number Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9

Flow Range Chart � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

Strainer Recommendations � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

Repair Kit Information� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

Specications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Pressure Rating � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Page ii October 2018TRB-UM-00372-EN-06

Scope of This Manual

SCOPE OF THIS MANUAL

This manual is intended to help you install and operate the QuikSert turbine
flow meter�

MPORTANTI

Read this manual carefully before attempting any installation or operation. Keep the manual
accessible for future reference.

UNPACKING AND INSPECTION

Upon opening the shipping container, visually inspect the product and applicable
accessories for any physical damage such as scratches, loose or broken parts, or
any other sign of damage that may have occurred during shipment�

OTE:N If damage is found, request an inspection by the carrier’s agent within 48 hours of

delivery and file a claim with the carrier� A claim for equipment damage in transit
is the sole responsibility of the purchaser�

SAFETY

Terminology and Symbols

Indicates a hazardous situation, which, if not avoided, is
estimated to be capable of causing death or serious
personal injury�
Indicates a hazardous situation, which, if not avoided, could
result in severe personal injury or death�
Indicates a hazardous situation, which, if not avoided, is
estimated to be capable of causing minor or moderate
personal injury or damage to property�

MPORTANTI

Not following instructions properly may impair safety of equipment and/or personnel.

Page 3 October 2018 TRB-UM-00372-EN-06

Introduction

INTRODUCTION

The QuikSert Standard turbine flow meter was developed for liquid applications
where accuracy and dependability are of concern to the operator� The stainless
steel body incorporates a helical turbine with tungsten carbide shaft and bearings�
It provides an efficient, long service life and a cost-effective solution for your
measurement requirements�

Simple in design and construction, QuikSert uses modified upstream and
downstream flow straighteners for a high degree of flow accuracy� Its between­the-flange design eliminates the need for mating flanges, requiring less space in
the flow line, lowering costs and providing easy, one-person installation�

The meter produces a sine wave signal proportional to its volumetric flow rate�
With optional Blancett electronics, QuikSert provides local flow rate and volume
totalization and can interface with most instruments, PLCs and computers�

OPERATING PRINCIPLE

Fluid entering the meter passes through the inlet flow straightener which reduces
its turbulent flow pattern and improves the fluid’s velocity profile� Fluid then
passes through the turbine, causing it to rotate at a speed proportional to the
fluid velocity� As each turbine blade passes through the magnetic field, the blade
generates an AC voltage pulse in the pickup coil at the base of the magnetic
pickup (see Figure 1)� These pulses produce an output frequency proportional to
the volumetric flow through the meter� The output frequency represents flow rate
and/or totalization of fluid passing through the turbine flow meter�

Figure 1: Electric signal generated by rotor movement

Page 4 October 2018TRB-UM-00372-EN-06