Badger Meter 3000 Specifications

Industrial Flow Monitor

Series 3000

DESCRIPTION

The Badger Meter® Series 3000 flow monitor is an economical, full-featured, compact unit designed for flow measurement applications and general hydronic thermal transfer systems.

Outputs include one mechanical relay and one solid-state pulse output, both featuring unit/pulse and setpoint control independently based on flow or total readings. Also driven by the same variables, an optional analog 4…20 mA or 0…20 mA output is provided. Additionally, the optional USB, RS-485 Modbus, and BACnet/MSTP provide high-level communication.

A two line by 16-character 3/8 in. (9.5 mm) high backlit LCD display is configured by the user to display flow rate, flow total. In addition to many pre-programmed units of measure, many custom units can be created during field setup.

The flow sensor input features flexible scaling options and signal type selections that permit the use of most Badger Meter sensors, or other frequency sine/pulse or linear analog devices.

DIMENSIONS

3.78 in.

(96 mm)

3.23 in.

(82 mm)

OPTIONS

NEMA 4X panel mount conforms to DIN standard 96 mm x 96 mm for meter size and cutouts. NEMA 4X wall mount is available as an option.

FEATURES

• Infinite Impulse Response Filter (IIRF) smooths the flow rate calculations. This proprietary smoothing software provides accurate calculations by compensating for a wide variety of flow signal variables.

• Password-restricted access to programming, reset total, or both.

• Non-volatile memory of totals and field configuration, without need for battery backup.

• Efficient switching power supply permits 12…24V AC/DC operations.

PROGRAMMING

Programming is very easy and can be done using the five front panel push buttons, or optionally by using Windows®-based software via a USB port.

PART NUMBER CONFIGURATION

Series

Flow Monitor 3000

Option - Analog Output, RS485 (BACnet / Modbus), and USB

No Option 0 Analog Output, RS485 with BACnet and Modbus, and USB 1

Option - Mounting

Panel Mount 0 Wall Mount 1

Example: 3000 - x x

3.49 in.

(88.7 mm)

TOP

3.54 in.

(90 mm)

MOUNTING TEMPLATE

(122 mm)

3.78 in.

(96 mm)

3.57…3.60 in.

(90.6…91.4 mm)

2.21 in.

(56 mm)

Figure 1: Panel mount template

4.33 in.

(110 mm)

1/8 in.

(3.2 mm)

WALL

4.80 in.

4.72 in.

(120 mm)

SIDE

PANEL

CUTOUT

3.49 in.

(88.7 mm)

(90.6…91.4 mm)

3.62 in.

(92 mm)

SIDE

3.57…3.60 in.

DSY-DS-01685-EN-04 (February 2017)

Figure 2: Wall mount template

Product Data Sheet

Industrial Flow Monitor, Series 3000

FLOW SENSOR INPUTS

Type Threshold Signal Input Frequency Pull-up Impedance Aux. Power Calibration

Pulse-DI 2.5V DC 30V DC 0.4 Hz…10 kHz 1K…12V DC — 12V DC @30 mA K + Offset

Pulse K-factor 2.5V DC 30V DC 0.4 Hz…10 kHz — — 12V DC @30 mA Pulse/Gal

Pull-up K-factor 2.5V DC 30V DC 0.4 Hz…10 kHz 1K…12V DC — 12V DC @30 mA Pulse/Gal Analog 4…20 mA — 50 mA Fused — — 100 Ω 12V DC @30 mA Linear Analog 0…20 mA — 50 mA Fused — — 100 Ω 12V DC @30 mA Linear Analog 0…1V DC — 30V DC — — 100 Ω 12V DC @30 mA Linear Analog 0…5V DC — 30V DC — — 100 Ω 12V DC @30 mA Linear

Analog 0…10V DC — 30V DC — — 100 Ω 12V DC @30 mA Linear

SPECIFICATIONS

Voltage 12…24V DC/AC (limit: 8…35V DC); (limit: 8…28V AC)

Operating Temperature –4…158° F (–20…70° C)

Storage Temperature –22…176° F (–30…80° C) Weight Panel Mount: 12 oz Pulse and Relays Both pulse and relay are fully functional as either totalizing or setpoint outputs Pulse Electrical 1 Amp at 35V DC/30V AC Closed: 0.5 Ω at 1 Amp; Open: >10

Relay Electrical

Pulse/Unit Volume (Totalizer)

Setpoint (Alarm)

Resistive Load:

5A @ 120V AC/30V DC

Driving Source: flow total, Rate: 1 pulse per 1.0000000…99999999 units Contact Time: 1…9999 mS

Driving Source: flow rate Units: Any predefined or custom unit Setpoint: 1.0000000…999999999 Delay to Set: 1…9999 sec Release Point: 1.0000000…999999999 Delay to Release: 1…9999 sec

Optional Analog Output Driving Source: flow rate

Inductive Load:

1A @ 120V AC/30V DC

Range: 4…20 mA; 0…20 mA (isolated current sinking or sourcing)

Ω

USB Communication Provides complete access to all programming and operation features

RS-485 Communication Supports Modbus and BACnet/MSTP Accessories Programming kit; wall mount kit

US gpm; US gal/sec; US gal/hr; US mgal/day; lps; lpm; lph; ft3/Sec; ft3/min; ft3/hr; m3/sec; m3/min;

Rate

Units of Measure

Total

m3/hr; acre-ft/sec; acre-ft/min; acre-ft/hr; bbl/sec; bbl/min; bbl/hr; and field programmed custom units 0.00…999999999

US gallon; US mgal; liters; ft3; m3; acre-ft; bbl; and field programmed custom units

0.00…999999999

DC current draw (~ 280 mA) AC power rating (~5 VA)

Sinking: 30V DC @ 0 mA max; 3V @ 20 mA min.

Sourcing: 600 Ω max load Requirements: USB 2.0 A to Mini-B, five-pin

cable

Control. Manage. Optimize.

Data Industrial is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specications without notice, except to the extent an outstanding contractual obligation exists. © 2017 Badger Meter, Inc. All rights reserved.

www.badgermeter.com

Badger Meter 3000 Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual