Badger Basket 364, 367 User Manual

ASSEMBLY INSTRUCTIONS

Adult Assembly Required.

Save these instructions for future use.

This item is a toy for dolls only.

For children ages three (3) years and older.

MODEL #: 00364 Pink Rosebud, 00367 Pink Gingham
NAME: Folding Doll Cradle with Hood

TOOLS NEEDED: Phillips Screwdriver

P ARTS INCLUDED:

(A) 2 - Side Panels
(B) 1 - Upper Support Bar
(C) 1 - Lower Support Bar
(D) 6 - Bolts
(E) 1 - Cradle Body
(F) 2 - Washers
(G) 2 - T-Nuts
(H) 1 - Cradle Mattress with Sheet

E

A

A

C

B

BEFORE YOU BEGIN

ASSEMBLY:

Ensure that all the parts and

hardware listed above are included.

If anything is missing, please do not

call, or return the product to, the

store. Call or e-mail us for assistance.

H

G

D

F

CARE INSTRUCTIONS:

W ood/MDF parts can be wiped
clean with a damp cloth. The fabric
parts are poly/cotton. Spot clean as

needed with mild soap and

let air dry .

Page 1 of 2

Visit us online at www.badgerbasket.com

Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)

[e-mail]

PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 715-352-2311 Fax: [phone]

CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010

1.0/0406

STEP 1: See PICTURE 1. Assemble the cradle base by attaching the TWO SIDE P ANELS (A) to the UPPER SUPPORT
BAR (B) and the LOWER SUPPORT BAR (C) using a total of FOUR BOLTS (D).

STEP 2: See PICTURE 2. Attach the CRADLE BODY (E) to the UPPER SUPPOR T BAR (B) using the predrilled holes,
TWO BOLTS (D), TWO WASHERS (F), and TWO T-NUTS (G).

Insert the bolts (with washers) through the holes on the cradle bottom, then insert them through the holes on the

upper support bar, and then secure the ends of the bolts in place on the underside of the support bar using the T-Nuts.

C

B

E

B

A

A

PICTURE 1

PICTURE 2

G

STEP 3: See PICTURE 3. Unfold the two metal supports inside of the cradle body and lock them in place by putting one
side behind the rubber stopper and the other side in front of the rubber stopper, as shown.

STEP 4: See PICTURE 4. Place the CRADLE MATTRESS WITH SHEET (H) inside of the cradle body . Next, secure the
hood in the open position by pressing on the hinge bars to lock into place.

Your DOLL CRADLE is now ready to enjoy!

This beautiful item is suitable for children from three years old and up. Please make sure children
know that this furniture is for dolls and stuffed animals only .

Children should NEVER attempt to
sit or stand on the bed. It is NEVER
to be used with real infants or pets.

When play time is over, the hood hinge bars can be

released to collapse the hood; and the metal support

bars inside the cradle can be released to collapse the

cradle body for storage or travel.

PICTURE 3

PICTURE 4

Hinge Bar

H

1.0/0406Page 2 of 2