Badger Basket 1017 User Manual

CHERRY DOLL HIGH CHAIR

MODEL NUMBER:

01017

Assembly Instructions.

Adult Assembly Required.

Page 1 of 4

* Toys/accessories shown here ar e
not included. Product may vary from
what is shown.

Visit us online at www.badgerbasket.com

Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)

Web: http://www.badgerbasket.com/parts • E-mail: [e-mail]

Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: [phone] • Fax: [phone]

1.0/0908/TG

BEFORE YOU BEGIN ASSEMBLY:

Check all parts and hardware.

If anything is missing or not satisfactory,

please DO NOT call the store or return the product to them.

Contact Badger Basket for assistance.

Most problems are resolved without you needing to leave home.

When contacting us, please have this instruction manual, your

product model number , and your product version code ready.

For fastest service, go to

http://www .badgerbasket.com/parts

Your Product Version Code is: 1.0/0908/TG

WARNING - CAUTION

READ ALL INSTRUCTIONS before use of this product. Product and/or

Hardware may include small parts or screws with sharp points.

Choking Hazard! Keep unassembled parts out of the reach of small children.

Use only the parts and hardware provided by Badger Basket.

Keep instructions for future use. Do not use the product if it is damaged or

broken. Periodically inspect the product and retighten hardware if needed.

This item is a toy for dolls only. It is never to be used for real children

or pets. For children ages three (3) years and older.

Page 2 of 4

1.0/0908/TG

TOOLS NEEDED:

Phillips Screwdriver

PARTS INCLUDED:

(A1) 1 - Left Side Panel*
(A2) 1 - Right Side Panel*
(B) 1 - Seat Panel

*The countersunk hole on

each End Panel faces out

(C) 10 - Short Screws
(D) 1 - Back Panel

So, this determines which

(E) 1 - Tray
(F) 2 - Long Bolts
(G) 1 - Foot Rest Rail
(H) 1 - Bottom Rail
(J) 2 - Spacer Washers (not shown)

A WHITE HIGH CHAIR IS SHOWN

IN THE ASSEMBLY PHOTOS.

ALL PAR TS AND ASSEMBL Y STEPS ARE

THE SAME FOR THE CHERRY MODEL.

when assembled.

panel is left and

which is right.

NOTE:

A2x1*

A1x1*

Gx1

Bx1

Hx1

Dx1

Fx2

Cx10

Ex1

STEP 1 - PICTURE 1: Secure the SEAT PANEL (B), with the fabric side up, between the TWO SIDE
PANELS (A1, A2) using FOUR SHORT SCREWS (C).

STEP 2 - PICTURE 2: Secure the BACK P ANEL (D) between the TWO SIDE PANELS (A1, A2) using
TWO SHORT SCREWS (C) in the TOP HOLES.

STEP 3 - PICTURE 3: Attach the TRAY (E) to the TWO SIDE PANELS (A1, A2) and BACK PANEL
(D) using TWO LONG BOLTS (F) and the TWO SPACER WASHERS (J). The spacer washers slip over
the bolts BETWEEN the TRAY and the SIDE PANEL so the tray can be lifted and lowered smoothly
without rubbing.

STEP 4 - PICTURES 4 & 5: Secure the FOOT REST RAIL (G) and BOTTOM RAIL (H) between the
TWO SIDE PANELS (A1, A2) using FOUR SHORT SCREWS (C). Your Doll High Chair is ready!

CARE INSTRUCTIONS:

Wipe the highchair clean with a damp cloth and mild soap as needed. The

fabric is poly/cotton. For longevity and to maintain the appearance of the

product, we recommend spot cleaning or hand wash and air dry as needed;

but you can machine wash cold, gentle cycle, and tumble dry on

low if desired.

Page 3 of 4

1.0/0908/TG

B

D

C

G

C

C

A1

A1

A2

A1

H

A2

PICTURE 1 PICTURE 2 PICTURE 4

Remember to insert the

washers (J) over the bolts

(F) between the tray (E)

and panels A1 and A2.

D

E

A2A1

A2

PICTURE 3

* The plate/bib/spoon toys/accessories shown here are for
illustration purposes only and are not included with the product.

Page 4 of 4

F

PICTURE 5*

1.0/0908/TG