D.
Limited Warranty
The warranty is for the original purchaser. We will repair or re-
place, without charge, any part of a compressor we find to be de-
fective in factory material or workmanship within 12 months of
purchase. Proof of purchase is required (store receipt). Warranty
services are provided at our service facility at the address shown
below. You must pay all shipping and handling charges for your
compressor.
This warranty does not cover if your compressor is (a) damaged in
transport, by fire, corrosion, moisture or any occurrences beyond
our control, (b) subjected to negligence or misuse, or ( c ) operated
or maintained contrary to our instructions.
We will not be liable for damage to persons or property, commer-
cial loss or incidental or consequential damage due to a defective
compressor.
All implied warranties, including warranty of merchantability or
fitness, are limited to the duration of this written warranty. How-
ever, some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Therefore the above limitation
may not apply to you.
Further information on service and warranty info contact:
Badger Air
-
Brush Co.
9128 W. Belmont Ave
Franklin Park IL 60131
1800–AIR-BRUS(H)
www.badgerairbrush.com
Info@badgerairbrush.com
X-Air Compressor
Model 80
-
7
General User
And Maintenance Instructions
Thank you and congratulations on the purchase of your new compressor.
This unit is built to the highest quality standards which produces excel-
lent efficiency. If you use it properly and maintain it accordingly to this
manual, it will perform to your fullest satisfaction for many years to
come. Please read this manual carefully and follow the instructions, it
will guarantee you trouble free operation.
A.
Installation
1.
After taking your compressor out of its packaging, please check it
carefully for any damages due to shipping.
2.
Install the compressor on a flat surface in a suitably sized, dry room
with good ventilation, where the temperature is not likely to rise
above 94 degrees Fahrenheit (35 centigrade).
B.
Safety
1.
Do not use the oil less compressor for purposes other than those for
which it has been designed.
2.
Do not modify or repair the compressor while it is connected to the
electric current.
3.
Note: the electric outlet has to be properly installed and grounded!
Warning: to prevent fire or shock hazard, do not expose this equipment to rain or moisture.
C. Operating instructions
1.
Connect the equipment for your application to the outgoing fitting at
the front of the compressor.
2.
When the compressor gets hot from constantly running it automati-
cally shuts off. After waiting about 20 minuets to cool down, it will
start working again
This bolt of lightning indicates un insulated ma-
terial within your unit may cause an electrical
shock. For the safety of everyone please do not
remove product covering.
The exclamation point calls attention to features
for which you should read the enclosed literature
closely to prevent operating and maintenance
problems.
Loading...