Page 1
Dynamis Digital trainset set up -
please read before using your trainset
Step 1: Getting Started
Connect the Basestation to power supply. Insert batteries into handset and turn on.
Press the Stop Key if the indicator is ‘ON’. The IR Receiver LEDs will flash for a few seconds
as connection is made.
From new, your train has a default address of 3, Dynamis powers on ready to operate a
train with an address of 3.
Dynamis has a context menu. A list of the meanings of each item is shown overleaf.
Step 2: Turning the headlights on
Press headlight key to turn
headlights ON/OFF
Step 5. Running another train
Press [LOCO] and enter the address of the
loco / train to be run.
If there is already a roster entry this will be
shown, otherwise a new roster record is
created with the default name of
‘Locomotive X’ where X was the address
entered. This can be changed to be a more
representative name (step 3 on left).
Keypad for
direct
control of up
to 21
functions,
accessory
hotkeys and
alpha
numerical
keypad for
loco and
accessory
address
entry
Handset features
Action keys
Left hand is MODE key to switch between locomotive and accessory control
Emergency stop
Infrared receiver / transmitter
Screen
Direction
Battery
compartment
ON/OFF switch
Lanyard fixing
Joystick
Battery
compartment
Headlights
Step 4. Changing the handset roster information
To change the name press -
MENU EDIT NAME
Use
to delete default name
Enter a new name eg
CLASS 150 DMU
using the keypad
To change the Icon press -
MENU
[SCROLL]
EDIT SYMBOL
choose one of the icons,
or none.
Thank you for your choice of the Bachmann Branchline Dynamis Digital Trainset. Please take
a few moments to familiarise yourself with the system. Please also refer to the enclosed
general train set User Guide, although some set contents may differ.
The tape under the Basestation should only be removed to expand the system with the
separately available ProBox.
Step 3: Changing the address of your train
Each digital train has an address - a number between 1 and 9999 - that it will respond to
The address can be changed as often as desired, but when carrying out this procedure the
train being addressed must be the only train on the track connected to the Dynamis
Use WRITE ADDRESS ON SERVICE TRACK option in the Program menu
press
MENU
[SCROLL]
PROGRAM
[SCROLL]
WRITE ADDR ON SERVICE TRACK
Use to delete existing address then, enter the new address and press [PROG]
The train will move momentarily during programming.
Shift key to access
F11 to F20
Page 2
Dynamis Train Set User Guide V01 Jun 09
Indicators for decoder function status
ON / OFF
Infra red signal
condition
Track short circuit reported by
Command station
STOP
indicator
Low battery power
Text, including loco details
and menus etc
Speed and direction indicators
Consist
indicator
Action Key icons
Used only when
the Dynamis Pro
Box is also used
Shift key pressed
indicator
Headlights ON
indicator
Screen Reference
Action key icons
[CONSIST]
[MENU]
[LOCO]
[CV<>]
[<>VALUE]
[ACCEPT] [CANCEL]
[READ] [PROG]
[BKSP]
Add loco to / remove from Consist
Select locomotive by address
Turnout / accessory operation - turnouts
left / right or accessories on / off
Access the menu
Accept Cancel
Scroll left or right
Move between CV selection and value for
CV in the programming menus
Write value to CV / read from CV
Backspace in text entry
[DIVERGE]
or
[STRAIGHT]
Description of action
Description of key
in User Guide
[SCROLL]
Full instructions for the use of Dynamis are
contained in the accompanying User Guide
Loading...