BabySmart 99-01069-20 A0 User Manual

SMART Response™ PE/XE

Quick Start Guide

Safety and compliance information................................................................2

Compliance............................................................................................2

About SMART Response...............................................................................3

What’s in the box? .........................................................................................3

Installing the clicker batteries.........................................................................4

Environmental considerations and computer requirements...................4

Environmental considerations................................................................4

Computer requirements .........................................................................4

Installing SMART Response software ...........................................................5

Mounting and connecting the receiver ...........................................................6

SMART Response tools integrated with SMART Notebook software............7

Using SMART Response ...............................................................................7

Question types.......................................................................................9

For more information....................................................................................10

Contacting SMART Technologies........................................................10

Technical support ................................................................................10

99-01069-20 A0

2 | QUICK START GUIDE – SMART RESPONSE PE/XE

Safety and compliance information

WARNING

Failure to follow the installation instructions that ship with the SMART product
could result in personal injury or damage to the product.

CAUTION

Do not open the receiver or clicker units to attempt repairs. Refer all service to
authorized SMART service personnel.

Compliance

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that
may cause undesired operation.

Changes or modifications to this equipment not expressly approved by SMART
Technologies ULC may void the user’s authority to operate this equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.

This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

– Re-orient or move the receiver or clicker units.

– Increase the distance between the other equipment and this product.

– Connect the affected equipment to an outlet on a circuit different from that to

which the receiver’s computer is connected.

– Consult your SMART service representative or an experienced radio/TV

technician for help.

99-01069-20 A0

3 | QUICK START GUIDE

– SMART RESPONSE PE/XE

About SMART Response™

SMART Response interactive response system is an assessment tool that enables
teachers to pose questions to find out whether students are on track.

This guide explains how to install SMART Response software and connect the receiver
to your computer. Then you’re ready to create a question in SMART Notebook
software, start a class and connect students’ clickers to the class so they can answer
the question.

For more detail, see the SMART Response PE User’s Guide

XE User’s Guide on the SMART Response software DVD or on the SMART website.

After you install the SMART Response software, you can also consult the online Help
system for information about SMART Response software’s features.

or the SMART Response

What’s in the box?

The shipping carton contains:

• A carrying case containing:

– 24 or 32 clickers (SMART Response PE), or

– 24, 32 or 40 clickers (SMART Response XE)

• 48 or 64 AA batteries (SMART Response PE), or
96, 128 or 160 AAA batteries (SMART Response XE)*

•A receiver

• A Phillips® No. 1 screwdriver

• A software DVD containing:

– SMART Response interactive response software

– SMART Notebook™ collaborative learning software

– SMART Product Drivers

– User documentation

•This SMART Response PE/XE Quick Start Guide

* SMART provides enough batteries for the clickers purchased.

If your kit is missing an item, contact your authorized SMART reseller. You can
purchase SMART Response receivers separately, and purchase clickers individually or
in packs of five. Contact your authorized SMART reseller for details.

99-01069-20 A0

4 | QUICK START GUIDE – SMART RESPONSE PE/XE

SMART Response XE clicker

SMART Response PE clicker

Installing the clicker batteries

1. Using the included
screwdriver, remove the screw
from the back of the clicker,
and then remove the cover.

2. Insert the included batteries.

3. Replace the cover and the
screw.

Environmental considerations and computer requirements

Environmental considerations

SMART Response components can operate in the temperature range of 41°F to 95°F
(5°C to 35°C). In addition, the product can withstand storage temperatures from -40°F
to 120°F (-40°C to 50°C).

SMART Response components can operate in up to 80% relative humidity,
non-condensing.

Computer requirements

Windows® operating systems

• Pentium® III 750 MHz or later processor

• 512 MB of RAM (1 GB recommended)

• 800 MB of free hard disk space for minimum installation
(2.15 GB for full installation with Gallery collections)

• Windows XP, Windows Vista® or Windows 7 operating system

• Internet Explorer® Internet browser 6.0 or later

• Adobe® Flash® Player 10 or later

• Adobe Reader® 8.0 or later

• Microsoft® DirectX® application programming interface 8.1 or later
(required for SMART Video Player)

99-01069-20 A0