W4755 Lily 3 Drawer Changer Package Contents
!
WARNING!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.
!!PLEASE READ!!
Assembly of this furniture is easier with two
people. Assemble furniture on debris free
carpets or on the enclosed foam sheets to
prevent scratching of finish. Using any
power tools to assemble this furniture may
potentially strip the wood. DO NOT
OVERTIGHTEN SCREWS. DO NOT USE
THE CHANGING TABLE IF IT IS
DAMAGED OR BROKEN.
Keep instructions
for future reference.
Tools required: Phillips screwdriver, Flat-head screwdriver.
(H1) 2.5” Machine Bolt - Quantity: 4
(H5) Barrel Nut
Quantity: 4
(H11) Right Panel Glide - Quantity: 3
(H12) Left Panel Glide - Quantity: 3
revised 09-2009
(H6) Nylon
Dowel
Quantity: 16
HARDWARE
(H2) 1.75” Machine Bolt - Quantity: 12
(H7) Wood
Screw
Quantity: 36
(H13) Right Drawer Glide - Quantity: 3
(H14) Left Drawer Glide - Quantity: 3
(H8) Wood Screw
Quantity: 12
(H3) Cam Bolts
Quantity: 6
(H9) Knob
Quantity: 6
(SS) Safety Strap Assembly
(SS2) Safety Strap Screw
(H4) Cam Lock
Quantity: 6
(H10) Knob Screw
Quantity: 6
Quantity: 1
Quantity: 2
PARTS
(C) Changer Top Shelf - Quantity: 1
(D) Top Round Bars - Quantity: 2
(A) Left End Panel
Quantity: 1
(F) Top Front Panel Rail - Quantity: 1
(G) Mid-Support Rail - Quantity: 4
(L) Wood Dowel - Quantity: 4
(B) Right End Panel
Quantity: 1
(J) Back Panel - Quantity: 1
(E) Top Back Panel Rail - Quantity: 1
(K) Changer Pad
Quantity: 1
(D1) Right Drawer Panel
Quantity: 3
(D4) Back Drawer Panel - Quantity: 3
(D2) Left Drawer Panel
Quantity: 3
(D3) Front Drawer Panel - Quantity: 3
(D5) Drawer Bottom Board
Quantity: 3
(Step 1) Installing the Rail Glides
- Close-up of rail H11 installed onto panel B.
(H12) Left Panel Glide
(H12) Left Panel Glide
(H12) Left Panel Glide
(H11) Right Panel Glide
(H11) Right Panel Glide
(H11) Right Panel Glide
(B) Right End Panel(A) Left End Panel
(Step 2) Insert Nylon Dowels H6 into the rails
and bars.
(D) Top Round Bar X 2
Install the rail glides (H11) and (H12)
onto the end panels (A) and (B).Use 3
wood screws (H7) for each glide.
DO NOT OVERTIGHTEN.
(Step 3) Installing the Wood Rails
-Attach the wood rails to the end panel as shown.
Assembly is much easier with two people.
(G)
(D)
(F)
(G)
(D)
(G)
(G)
(E)
(F) Top Front Panel Rail
(E) Top Back Panel Rail
(G) Mid-Support Rail X 4
(H6) Nylon
Dowel
(H1)
(H5)
(H2)
(H5)
(A)
(H1)
(H2)
(Step 4) Installing the Shelf and Back Panel.
(C)
Make sure
unfinished
side is
facing down
(J)
(Step 5) Installing the
Right End.
(H1)
(H2)
(H1)
(H2)
(L)
(L)
(L)
Wood
Dowel
(H5)
(H5)
(L)
Wood
Dowel
(A)
The recommended maximum weight:
The recommended maximum weight of
the occupant is 30 lbs.
Restraint System
WARNING:
During the diaper changing process, be sure always to keep one hand on the baby to prevent the baby from falling off the
changing pad. Falling from the changing pad could cause severe injury or even death to the baby.
Step 1.
Place a baby on the pad with his/her bottom on the
top of the diaper. Safely secure the baby on the pad
with the safety straps and buckle on the pad. This
helps prevent the baby from falling off the pad,
which can result in severe injury or even death of
the baby.
Step 3.
Push the baby’s legs forward and create a cavity
under the baby’s bottom. Clean the baby.
Step 2.
Remove the dirty diaper from the baby.
Step 4.
Reattach the new diaper to a clean and happy
baby!
WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING THIS
PRODUCT. KEEP THE MANUAL FOR FUTURE USE.
WARNING:
Read all instructions before use of the changing table.•
Do not use changing table if it is damaged or broken.•
This product is not intended to be used to be used as•
a changing table without adult supervision. Use of the
product without this may result in death or serious injury
to your child from falling. Follow all instructions on at-
taching and using the changing table.
When using this product, always secure the child with•
ONE YEAR LIMITED WARRANTY :
We will replace any missing parts at the time
of purchase or any defective item within a one
year period from the date of original purchase.
Please keep your receipt so that we may pro-
cess your warranty request. This warranty only
covers new units with original packaging and
ownership, and is not transferable. It does not
cover any used, secondhand or demo mod-
els.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware of the crib. The
specific legal rights of this warranty may vary
from state to state. Some states do not allow
any exclusion or limitation of incidental damages. Some stated do not allow limitation on
how long an implied warranty lasts.
Registering your product is even easier than before. You can register your
product on our website at
www.milliondollarbaby.com
the safety strip.
Only use the pad provided by BabyMod.•
The maximum weight of the child for which the chang-•
ing table is intended is 30 lbs.
Stop using this changing table when the child is able to•
sit up or roll over.
As with all infant and baby furniture, it is important to•
check fasteners, screws, and bolts periodically for tight-
ness. Parents should ensure a safe environment for
thier child by checking the furtniture regularly before
placing the child in the product.
WARNING!
FALL HAZARD
To prevent death or
serious injury, always
keep child within arm’s
reach. Never leave child
unattended and always
use restraining system.
Maintenance and Cleaning:
Do not scratch or chip the finish. Do not use
abrasive chemicals for cleaning. Clean with mild
soap on a soft rag. Rinse and dry thoroughly. If
you ever refinish this furniture, be sure to use
only a non-toxic finish specified for children’ s
products. If you choose to refinish this furniture,
the warranty will be voided.
Storage:
Pine woods exchange moisture with the air
adjusting to major changes in room temperature
and humidity. Therefore it is best to place your
furniture away from heating or air-conditioning
vents. Sunlight is not friendly to solid wood
furniture and prolonged direct exposure to harsh
sunlight can discolor the finish. Be careful not to
place your furniture in direct sunlight for extended
periods of time. As with all your fine furniture,
blot up spills immediately.
IF YOU WOULD LIKE TO ORDER REPLACEMENT
OR MISSING PARTS. PLEASE VISIT US AT:
WWW.MILLIONDOLLARBABY.COM
OR YOU CAN CONTACT US BY MAIL:
BABYMOD
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
Loading...