BaBylissPro BABNTMC1C, BABNTPKMC1C, BABNTCHMC1C Instruction Book

Models BABNTMC1C, BABNTPKMC1C

BABNTCHMC1C

FOR PROFESSIONAL USE ONLY

Modèles/Modelos BABNTMC1C

BABNTPKMC1C, BABNTCHMC1C

POUR USAGE PROFESSIONNEL UNIQUEMENT

PARA USO PROFESIONAL ÚNICAMENTE

For your safety and continued enjoyment

of this product, always read the

instruction book carefully before using.

MiraCurl

®

MiraCurl

®

Afin que votre appareil vous procure en toute sécurité beaucoup de

satisfaction, lire attentivement le mode d’emploi avant de l’utiliser.

Para su seguridad y para disfrutar plenamente de este producto,

siempre lea las instrucciones cuidadosamente antes de usarlo.

BABNT(PK)MC1C IB-13_085E.indd 2-3 12/8/16 9:45 AM

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL APPLIANCES, ESPECIALLY WHEN CHILDREN ARE PRESENT,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE TAKEN, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING.

KEEP AWAY FROM WATER.

DANGER –

ANY APPLIANCE IS ELECTRICALLY LIVE EVEN WHEN THE SWITCH IS

OFF. TO REDUCE THE RISK OF DEATH BY ELECTRIC SHOCK:

1. ALWAYS UNPLUG APPLIANCE IMMEDIATELY AFTER USING.

2. DO NOT USE WHILE BATHING OR IN THE SHOWER.

3. DO NOT PLACE OR STORE APPLIANCE WHERE IT CAN FALL OR BE PULLED INTO A TUB
OR SINK.

4. DO NOT PLACE IN, OR DROP INTO, WATER OR OTHER LIQUIDS.

5. IF AN APPLIANCE FALLS INTO WATER, UNPLUG IT IMMEDIATELY. DO NOT REACH INTO

THE WATER.

WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY

TO PERSONS:

1. THIS APPLIANCE SHOULD NEVER BE LEFT UNATTENDED WHEN PLUGGED IN.

2. DO NOT PULL, TWIST, OR WRAP LINE CORD AROUND APPLIANCE.

3. THIS APPLIANCE SHOULD NOT BE USED BY, ON, OR NEAR CHILDREN OR INDIVIDUALS
WITH CERTAIN DISABILITIES.

4. USE THIS APPLIANCE ONLY FOR ITS INTENDED USE, AS DESCRIBED IN THIS MANUAL.
DO NOT USE ATTACHMENTS NOT RECOMMENDED BY THE MANUFACTURER.

5. NEVER OPERATE THIS APPLIANCE IF IT HAS A DAMAGED CORD OR PLUG, IF IT IS NOT

WORKING PROPERLY, IF IT HAS BEEN DROPPED OR DAMAGED, OR DROPPED
INTO WATER. RETURN THE APPLIANCE TO AN AUTHORIZED SERVICE CENTER FOR
EXAMINATION AND REPAIR.

6. KEEP THE CORD AWAY FROM HEATED SURFACES.

7. NEVER USE WHILE SLEEPING.

8. NEVER DROP OR INSERT ANY OBJECT INTO ANY OPENING.

9. DO NOT USE OUTDOORS OR OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE

BEING USED OR WHERE OXYGEN IS BEING ADMINISTERED.

10. DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

11. THE OPENING OF THE APPLIANCE IS HOT WHEN IN USE. DO NOT PUT FINGERS OR
OTHER OBJECTS INTO THE OPENING AT ANY TIME.

12. DO NOT PLACE THE APPLIANCE ON ANY SURFACE WHILE IT IS OPERATING.

13. IN THE EVENT THE APPLIANCE IS LEFT SWITCHED ON, IT WILL AUTOMATICALLY

SHUT OFF AFTER 60 MINUTES. IF YOU WISH TO CONTINUE USING THE APPLIANCE
AFTER THIS TIME, SIMPLY SLIDE THE SWITCH TO OFF POSITION AND THEN SLIDE
THE SWITCH TO THE RELEVANT SETTING TO TURN THE POWER ON.

SAFETY INSTRUCTIONS

1. Do not use the unit if it is damp or if your hands are wet.

2. WARNING: Polyethylene bags containing this product or its packaging can be
dangerous. To avoid the risk of suffocation, keep these bags out of the reach of babies
and children. A polyethylene bag is not a plaything.

3. Do not use this appliance near bathtubs, showers, basins or other vessels

containing water.

4. If the appliance is used in a bathroom, unplug it after use. Leaving the appliance

near a source of water may be dangerous, even if the appliance is off. For additional
protection, the installation of a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA is advisable in the electrical circuit supplying
the bathroom. Ask your electrician for advice.

5. Do not immerse the appliance in water or any other liquid.

6. Stop using the appliance immediately if the cord is damaged. The power supply

cord should not be replaced by the end user. The power supply cord should only
be replaced by the manufacturer’s authorized importer (or, in the United States and
Canada, by an authorized Service Center).

7. Do not leave the appliance unattended while it is plugged in or in use.

8. Do not let the appliance’s hot surfaces touch eyes or skin.

9. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure they do
not play with the appliance.

BABNT(PK)MC1C IB-13_085E.indd 4-5 12/8/16 9:45 AM

FEATURES

• Nano Titanium curl chamber for smooth curl creation

• 3 timer settings with audio beep indicator for different curl effects

• 3 heat settings; 375°F, 410°F and 450°F for long-lasting results

• Powerful heating system ready to use in seconds with ultra-fast heat recovery

• Curl direction control for either a uniform or natural finish (Right/Left/Alternate)

• Suitable for shorter and longer hair lengths

• On/Off switch with ON indicator light

• Heat ready indicator

• Auto shutoff

• Sleep mode

• Motion sensor

• 8 ft. 360° swivel cord

Temperature Ready Indicator Light

Nano Titanium Curl Chamber

GET TO KNOW YOUR PROFESSIONAL STYLER

Models:
BABNTMC1C
BABNTPKMC1C
BABNTCHMC1C

Tighter Curls Medium Curls Looser Curls

You can create a variety of curls with different
combinations of heat, time and curl direction.
With MiraCurl®, it's easy to make miracles!

Powerful heating system – ready in seconds
with ultra-fast heat recovery

Smart Tech

®

Safeguard and energy saver: Auto

Shut Off + Sleep Mode + Motion Sensor

Curl Direction Setting (Right/Left /Alternate)

Time Setting (in seconds) (0, 8, 10, 12)

Temperature Setting (375°F, 410°F, 450°F)

MaxLife™ PRO brushless
motor for precision styling
and longer life

10. Allow the appliance to cool before storing.

11. After use, do not wind the cord around the appliance as this may damage it. Instead,
roll the cord up loosely and let it rest by the side of the appliance.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This appliance is intended for professional use. Use on Alternating Current (60 Hz) only.
Standard appliances are designed to operate at 125 volts AC.
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to defeat this safety feature.

NANO TITANIUM

TM

Your Nano Titanium™ MiraCurl® has many benefits. Nano titanium is an exceptional
conductor of heat and is stable in ultra-high temperatures. The Nano Titanium technology
utilizes micro particles of titanium and ceramic, providing the ultimate benefits for
beautiful, healthy-looking hair. Nano titanium yields maximum far-infrared heat,
penetrating the hair from within for gentle styling without damaging hair. Nano titanium
emits natural ions for faster stying, locking in hair’s own natural moisture. This Nano
Titanium

™

iron will give your hair a smooth, silky shine while eliminating frizz.

BABYLISSPRO

®

MiraCurl

®

Effortlessly create long-lasting beautiful curls, with BaBylissPRO® MiraCurl®. Hair is
automatically drawn into the Nano Titanium curl chamber where it is softly held and
heated from all directions to effortlessly form the curl. Then, simply release. The result is
beautiful, free-flowing curls.

Cleaning Tool Included

BABNT(PK)MC1C IB-13_085E.indd 6-7 12/8/16 9:45 AM

When styling the left side of the hair, slide the curl direction switch to the left position (L).
When styling the right side of the hair, slide the switch to the right position (R). This ensures
that the curl sits toward the face on both sides of the head and will give a more uniform style.
For a more natural look, select the alternate setting (A). This will alternate the direction
after each curl.

INSTRUCTIONS FOR USE

• Ensure hair is dry and combed through.

• Plug the styler into a 125V outlet.

• Slide the temperature switch to the required heat setting.

• The styler is ready for use when the ON indicator light has stopped flashing.

• There are 3 time settings; choose the optimum setting
for your hair type. Alternatively, switch the time setting
to 0.

• Select the curl direction by sliding the control to either
position L, R or A.

• Separate a section of hair that is no wider than 1 inch
(Figure A). Ensure that the section is clean, dry and
combed through.

• Please note the styler must be positioned into the hair
with the opening of the curl chamber facing toward
the head (Figure B).

• Position the styler where you want the curl to start.
The hair section must be straight, and placed neatly
through the center of the styler (Figures C and D).

• Once the hair is in place, let go of the hair section and
close the handle to allow the hair to be automatically
taken into the curl chamber (Figure E).

B

CED

A

OPERATING INSTRUCTIONS

The MiraCurl® will create many different curl effects in the hair. It is easy to experiment
with the different settings to achieve your desired results.
Always ensure that the sections of hair you want to curl are no wider than 1 inch wide. The
type of curl will depend on the temperature selected and the timer setting, which dictates
the amount of time the hair is kept inside the curl chamber.

TEMPERATURE SETTINGS

There are 3 temperature settings to select from 375°F, 410°F and 450°F. We recommend
you always start with the lowest temperature setting and increase the level of heat as
required.

• Setting I (375°F) - for delicate, fine or colored hair

• Setting II (410°F) - for normal textured hair

• Setting III (450°F) - for thick or wavy hair

TIME SETTINGS

There are 3 time settings with an automatic beep indicator. These different settings will
give different curl effects. The longer the hair is held inside the curl chamber, the more
defined the curl will be. But results will also vary according to hair type. Use the following
as a guide:

• Setting 8 (8 seconds = 3 beeps) - for loose waves

• Setting 10 (10 seconds = 4 beeps) - for soft curls

• Setting 12 (12 seconds = 5 beeps) - for more defined curls

• At the end, there will be 4 quick beeps in succession to indicate time is up, and it’s ready
to release hair.

AUDIO OFF SETTING

You can turn off the automatic beep indicator if it is not required by sliding the timer switch
to 0.

NOTE: When the 0 setting is selected, there will be no beep indicator to advise when to
release the styler. Take extra care when using this setting.

CURL DIRECTION SETTING (Right/Left/Alternate)

Use the curl direction control to choose either a uniform or natural finish. Select the curl
direction by sliding the switch to either left (L) or right (R) or alternate (A).

(L) starts the curl to to the left, counterclockwise.
(R) starts the curl to the right, clockwise.
You can also select the opposite direction on each side to create a symmetrical look.

BABNT(PK)MC1C IB-13_085E.indd 8-9 12/8/16 9:45 AM

NOTE: If you continue to hold the hair section after closing the handle the MiraCurl® will
stop and beep to indicate that you must release the tension on the hair. If you have taken
too much hair, or hair is not neatly going through the center of the appliance, the MiraCurl®
will again stop and beep to indicate a problem. This safety feature ensures there will be
no tangles.

• The hair is automatically drawn into the ceramic curl chamber where it is softly held and
heated from all directions to effortlessly form the curl.

• If you are using the timer setting, the automatic beep indicator will start as soon as the
handles are closed together. There will be a series of individual beeps. Hold the styler
still, with the handles held together until the end of the individual beeps. There will then
be four quick beeps in succession. This indicates that the time is up and you can remove
the styler from the hair. NOTE: When the audio off 0 setting is selected, there will be no
beep indicator. There will just be a warning beep at 15 seconds.

• It is very important that you release the handles fully, and then gently
pull the styler away from the head to free the hair and reveal the curl
(Figure F).

NOTE: Always release the handles first to set the curl free; if you pull away before you

open the handles, the curl will be straightened out.

• To allow the curl to set, do not comb or brush the hair until it cools.

• Repeat around the head until you have the amount of curls desired.

SMART TECH

®

MiraCurl® comes with 3 functions for added safety and energy savings.

• Auto Shut Off: If the appliance is switched on for more than 60 minutes continuously,
it will automatically switch off. If you wish to continue using the appliance, simply slide
the switch to off position and then slide the switch to the relevant setting to turn the
power on.

• Sleep Mode: After 20 minutes of idle time, the temperature drops to around 300°F/150°C.

• Motion Sensor: Move the iron and close it to trigger the reheat to set temperature.

F

USER MAINTENANCE

The appliance may require cleaning due to a buildup of residue from hair products.

• Ensure the unit is switched off, unplugged and cool.

• Using a damp cloth and mild detergent or soap, wipe the appliance.

• Ensure the unit has dried thoroughly before re-using.

CAUTION

NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around
the unit. Damage will occur at the high flex point of entry into the unit, causing it to
rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if
damage is visible or if unit stops or operates intermittently.

CLEANING & MAINTENANCE

It is very important that you use the cleaning tool included with your
iron to regularly clean the curl chamber. This will prevent a buildup
of product to ensure the curls produced are always perfectly formed.

• Ensure the appliance is switched off, unplugged and cool.

• Lightly dampen the cleaning tool with warm water and mild detergent or soap.

• Insert the tool fully into the curl chamber cavity as per the diagrams below.

• Rotate the tool around the curl chamber to remove any buildup of product.

• Ensure the appliance has dried thoroughly before re-using.

• The cleaning tool can be used numerous times; just remove the felt pads, rinse them in
warm, soapy water and let dry before using again.

BABNT(PK)MC1C IB-13_085E.indd 10-11 12/8/16 9:45 AM