BaBylissPro BAB8700U User Manual

PROFESSIONAL CORDLESS

SUPER MOTOR CLIPPER

Model BAB8700U

PROFESSIONAL CORDLESS SUPER MOTOR CLIPPER

A heavy-duty, lithium powered cordless clipper with precision
engineered Japanese steel blades and a high-torque brushless motor
to deliver outstanding cutting performance and precise control.

FEATURES

• High power cord or cordless performance

• Precision engineered Japanese steel blades with a super sharp V

cutting angle

• Advanced lithium for sustained power performance

• 3 hour charge time for 120 minutes run time

• High-torque brushless motor for long-lasting power and speed

• 5 position adjustable taper lever

• 6 comb guides for cutting grades 1-6

• Charging and storage unit

• Includes oil and cleaning brush

SAFETY CAUTIONS

• This appliance should only be used as described within this
instruction booklet. Please retain for reference.

IMPORTANT CHILD SAFETY

• WARNING! Polythene bags over product or packaging may
be dangerous. To avoid danger of suffocation, keep wrapper
away from babies and children. This bag is not a toy.

WARNING! THIS APPLIANCE GETS HOT!

• ALWAYS keep out of the reach of children (during and after
use and whilst cooling).

• This appliance should not be used, cleaned or maintained by
children.

Always take extra care if used on children or near children.

•

Do not use on very young children.

•

IMPORTANT SAFETY

WARNING! Do not use the appliance near water contained in
basins, bathtubs or other vessels.

• Do not use the appliance in the bathroom.

• Do not immerse the appliance in water or other liquids

• Always inspect the appliance before use for noticeable signs
of damage. Do not use if damaged, or if the appliance has
been dropped. In the event of damage, contact the Conair
Customer Care Line (refer to UK After Sales Service section for
further information).

• Do not use the appliance if the lead is damaged. In the event of
damage, discontinue use immediately. If the lead is damaged
it must be replaced by the manufacturer. Return the appliance
to the Customer Care Centre (refer to ‘UK After Sales Service’
section for further information). No repair must be attempted
by the consumer.

• Do not leave the appliance unattended when switched on.

• Do not place the appliance on any surface whilst in operation.

• This appliance should not be used by adults whose reduced
physical, sensory or mental capabilities, or whose lack of
experience and knowledge, might cause a hazard, unless they
have been correctly instructed to understand the safe use and
hazards involved and are adequately supervised.

• Special care is required when using the appliance close to the
ears, eyes and face.

• Always switch off and unplug the appliance when cleaning or
when not in use.

• Allow the appliance to cool before storing away.

• After use, do not coil the cord around the appliance as this
may cause damage to the cord. Instead, coil the cord loosely
by the side of the appliance.

• This appliance contains a lithium ion battery and must be
disposed of safely at the end of its life. Please take to a
recycling centre for safe disposal.

• This product complies fully with all appropriate EU and UK
Legislation and the Standards relevant to this type and class
of appliance. We are an ISO9001:2015 certied company
that continually evaluates our Quality Management System
performance. If you have any queries regarding product
safety and compliance, please contact our Customer Care
Centre. (Refer to ‘UK After Sales Service’ section for further
information).

PREPARATION FOR USE
General

• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc.

• Use on clean, dry hair that has been combed until tangle-free.

Oiling Instructions

• For optimum cutting performance, it is highly recommended to oil the
blades after every use.

• When using the oil for the rst time, unscrew the cap and cut off the
very end of the plastic tube with a pair of scissors.

• Remove the blade guard and switch the appliance on.

• Holding the clipper at a 45 degree angle, gently squeeze the oil tube
and apply 2 drops directly onto the blades.

• Leave the unit on for a further few seconds to allow the oil to
thoroughly spread along the length of the blades.

• Switch off the unit and remove any excess oil by gently dabbing with
a cloth before using on hair.