BaBylissPro BAB6689U User Manual

BAB6689U

GTIonic ll

Compact yet powerful, this perfectly balanced BaByliss PRO GTIonic ll
dryer combines ionic and ceramic technology to leave hair soft, shiny
and manageable.

Features:

• 2000W

• Combined ionic and ceramic technology

• High performance AC motor

• 6 heat/speed settings

• Cold shot

• Concentrator nozzle

• Comfort grip

• 2.7m salon length power cord

• Removable rear lter

• Hanging loop

SAFETY CAUTIONS

• This appliance should only be used as described within

this instruction booklet. Please retain for reference.
WARNING! Polythene bags over a product may be
dangerous. To avoid danger of suffocation, keep this
wrapper away from babies and children. This bag is not a
toy.

• UK Only: This appliance must not be used in the

bathroom. If using the appliance in a bathroom,

unplug after use as the proximity of water can

be dangerous even if the appliance is switched off. For

additional protection the installation of a residual current

device RCD) with a rated residual operating current not

exceeding 30mA is advisable in the electrical circuit

supplying the bathroom. Ask your installer for advice.

WARNING! Do not use this appliance near water contained
in basins, bathtubs or other vessels.

• Do not use this appliance in the bathroom.

• Do not immerse the appliance into water or other liquids.

• Never look directly into the barrel of the hairdryer when it

is switched on.

• Always inspect the appliance before use for noticeable

signs of damage. Do not use if damaged, or if the

appliance has been dropped. In the event of damage,

contact the Conair Customer Care Line (refer to UK After

Sales Service section for further information).

• Do not use the appliance if the lead is damaged. In the

event of damage, discontinue use immediately. Return

the appliance to the Conair Service Centre (refer to UK

After Sales Service section for further information).

• Do not leave the appliance unattended when switched on or

plugged in.

• This appliance is equipped with a safety thermostat. In

the event of overheating, the appliance will run hot and

cold intermittently. In the event of this happening, turn

the dryer off, unplug from the mains and allow to cool

for 15 minutes. Before using again, ensure the rear lter

is clear of hair and other debris. Plug in and switch on.

If the appliance continues to overheat (i.e. element glows

red intermittently), discontinue use immediately, switch off

and unplug. Contact the Conair Customer Care Line (refer

to UK After Sales Service section for further information).

• Take care that the air vents do not become blocked when

in use. Ensure the rear lter is clear of hair and other

debris before use.