Page 1
Model 7471U
7471U IB-17/206.indd 1 5/18/17 10:43 AM
Page 2
TITANIUM NITRIDE
The BaByliss for Men Titanium Nitride is a high performance hair clipper
with precision engineered Titanium Nitride blades for exceptional,
effortless cutting and professional results. A lithium-ion charging
system produces up to 80 minutes of cordless high power from only a
3 hour charge.
FEATURES
• Cordless operational clipper - use cordless for total exibility and
control.
• Lithium-ion technology for powerful cutting action and sustained
power performance.
• Precision engineered Titanium Nitride cutting blades for smooth,
effortless cutting.
• Lightweight for easy handling during use.
• Fine cut adjustment taper control for a high quality even nish.
• Lithium-ion charging system for 80 minutes of cordless use from a
3 hour charge.
• 30 Minutes quick charge for approximately 30 minutes of use.
• Grades 0-8 for a variety of different lengths and styles.
• Cleaning brush.
• Lubricating oil.
• Hard storage case.
• 3 year guarantee.
7471U IB-17/206.indd 2 5/18/17 10:43 AM
Page 3
SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction book. Please retain for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over the product or packaging
may be dangerous. To avoid danger of suffocation, keep
away from babies and children. These bags are not toys.
IMPORTANT SAFETY
• Do not use this appliance near water contained in basins,
bathtubs or other vessels.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage
contact the Conair Customer Care Line (refer to UK After
Sales Service section for further information).
• Only use the attachments supplied with this appliance.
• Do not leave the appliance unattended when switched
on.
• Do not place the appliance on any surface whilst in
operation.
• Special care is required when using the appliance close
to the ears, eyes and face.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
7471U IB-17/206.indd 3 5/18/17 10:43 AM
Page 4
understand the safe use and hazards involved and are
adequately supervised.
• Careful adult supervision is required when this appliance
is used on or near children. Do not use on very young
children.
• This appliance should not be used, cleaned or maintained
by children. Keep out of reach of children.
• Always ensure that this appliance is kept out of the reach
of children at all times, particularly during use and whilst
cooling.
• Allow the appliance to cool before storing away.
• This product complies fully with all appropriate EU
and UK Legislation and the Standards relevant to this
type and class of appliance. We are an ISO9001:2015
certied company that continually evaluates our Quality
Management System performance. If you have any
queries regarding product safety and compliance, please
contact our Customer Services Department. (See “U.K.
After Sales Service” section for further information.)
• The battery should be removed for safe disposal at the
end of its life.
7471U IB-17/206.indd 4 5/18/17 10:43 AM
Page 5
INSTRUCTIONS FOR USE
Charging the Appliance
IMPORTANT! Only use the adaptor supplied with this appliance.
This clipper is so easy to use, but before you do anything you must take
your time to charge the unit for 3 hours before its rst use. Maximum
battery capacity will only be reached after 3 charging/discharging
cycles. A 3 hour charge will provide approximately 80 minutes use.
A 30 minute quick charge will provide approximately 30 minutes use.
The red LED light will ash when charging the appliance, and the red
light will stop ashing but remain on when fully charged.
NOTE: Do not charge the appliance for longer than the recommended
time.
WARNING: if the charging light suddenly starts to ash rapidly, the
appliance is faulty. If this happens,please stop charging and remove
the adapter from the outlet and contact our customer care center for
further advice.
Cordless Operation
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch off. The red LED light will ash when the
adaptor is correctly inserted into the appliance and connected to the
mains.
• Once the appliance is fully charged the red LED charging light will
stop ashing but remain on, unplug the adaptor from the mains.
Oiling Instructions
IMPORTANT! It is highly recommended before each use to oil the blades
with the oil provided. This ensures optimum cutting performance.
For the rst use you will need to use the oil supplied with the product,
unscrew the cap and cut off the very end of the plastic tube with a pair
of scissors to release the oil.
7471U IB-17/206.indd 5 5/18/17 10:43 AM
Page 6
To oil the blades ensure the unit is switched on. Gently squeeze the oil
tube and apply 2 drops of oil onto the blades. Leave the unit on for a
further few seconds to allow the oil to thoroughly spread the length of
the blades. Switch off the unit and remove any excess oil by gently
dabbing with a cloth.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable
batteries, the appliance has to be fully discharged every 6 months
approximately. Then recharge the appliance to full capacity, again for
3 hours.
Comb Guides
This appliance is supplied with 8 comb guides:
Cutting Length Grade
3mm #1
6mm #2
9.5mm #3
13mm #4
16mm #5
19mm #6
22mm #7
25mm #8
• To attach a comb guide, ensure the appliance is switched off. Position
the comb guide over the front of the clipper blade and slide over the
head. Push and click the rear of the comb guide into position.
• To remove the comb guide, ensure the appliance is switched off.
Push the tab on the rear of the comb guide away from the head and
lift off.
7471U IB-17/206.indd 6 5/18/17 10:43 AM
Page 7
Taper Control
The taper control lever enables ne cut adjustment for precision
clipping.
• To increase the cutting length, push the lever down.
• To reduce the cutting length, push the lever up.
Preparation for Use
• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc.
• For best performance, use on clean, dry hair that has been combed
until tangle-free.
• Ensure the appliance is sufciently charged.
Clipping
For an all over even cut:
• Attach a comb guide as required – your clipper is supplied with 8
comb guides (grades 1, 2, 3, 4, 5, 6, 7 & 8). Each comb guide is
labelled.
• Switch the clipper on and the blades will start to move.
• Starting at the nape of the neck, hold the clipper with the teeth of the
clipper pointing upwards, ensuring that the comb guide is resting at
against the head.
• Slowly move the clipper upwards and outwards through the hair
towards your crown, against the direction of the hair growth. The
comb guide will help to lift the hair and the blades will cut the hair at
the desired length.
• Once the desired length is achieved at the back of the hair, start
clipping the top and sides.
• Hold the clipper to the front of your hair with the teeth pointing
towards the back of your head, and move the clipper towards your
crown. Repeat as necessary, moving in rows from the front and the
sides of your head to the back.
• You should achieve an even length cut all over your head.
7471U IB-17/206.indd 7 5/18/17 10:43 AM
Page 8
For a shorter back and sides, with length on the top:
• Attach the longer comb guide as required for the top of your
hair – your clipper is supplied with 8 comb guides (grades 1, 2, 3, 4,
5, 6, 7 & 8). Each comb guide is labelled.
• Switch the clipper on and the blades will start to move.
• Hold the clipper to the front of your hair with the teeth pointing
towards the back of your head and move the clipper towards your
crown. Repeat as necessary, moving in rows from the front and the
sides of your head to the back.
• If you then wish to take the back and sides of your hair to a shorter
length, switch off the appliance and attach a shorter comb guide.
• Starting at the nape of the neck, with the comb guide at against
the head, move the clipper upwards and outwards over the area you
want to take shorter.
• Repeat on the sides of the hair, starting with the teeth of the clipper
pointing upwards and comb guide at against the area above the ear,
again moving the clipper upwards and outwards.
Outlining:
• To tidy up the edges around your cut e.g. neckline and sideburns,
detach the comb guides.
• Hold the appliance upside down, so the front of the clipper is facing
towards your head.
• Hold the clipper straight on your sideburns or neckline and move the
clipper downwards. This will give you a clean, smooth nish.
Cleaning & Maintenance
For easy cleaning, the blades on your BaByliss For Men clipper are
removable. Regular cleaning will maintain their high performance level.
To clean proceed as follows:
• Remove the comb guide after use. Rinse under running water and
dry thoroughly before storage or use.
• The clipper blade are removable for easy cleaning. To remove the
blades, hold the clipper with the blades pointing upwards and
push the underside of the blade teeth upwards to remove. Do not
disassemble the blades.
• Using the cleaning brush, brush and blow away any remaining hair.
7471U IB-17/206.indd 8 5/18/17 10:43 AM
Page 9
• To replace the blades, ensure the taper control lever is set at the
lowest position by pushing the lever up and click the blades into
position.
• To preserve your clipper’s efciency, we recommend cleaning the
blades regularly. After cleaning, switch the appliance on and oil the
blades using a few drops of the lubricating oil supplied. Only use
the lubricating oil supplied with the appliance as this is specically
formulated for high speed clippers and does not evaporate or slow
the blades.
NOTE: Do not attempt to repair or replace the blades. In the event that
the blades become blunt or damaged, contact the Conair Customer
Care Line (refer to UK «After Sales Service» section for further
information).
SAFE DISPOSAL
To minimise hazards to health and the environment at the end of
this product’s life, laws dealing with Waste Electrical and Electronic
Equipment (WEEE) and The Waste Battery Directive require you to
dispose of this product at a suitable collection facility where it will be
sent for appropriate recycling. Please contact your local authorities for
more details on recycling and safe disposal of these in your area.
7471U IB-17/206.indd 9 5/18/17 10:43 AM
Page 10
UK GUARANTEE
The Conair Group Ltd, Unit 3, Waterfront Business Park,
Fleet GU51 3TW
This BaByliss for Men appliance is guaranteed for consumer use for 3
years and is only valid within the United Kingdom.
This guarantee covers consumer use only i.e. defects occurring under
normal use within the home from date of purchase or date of delivery,
whichever is later.
If the product develops a fault due to defects in materials or manufacture
within 12 months from the date of purchase, to avoid delays and
unnecessary inconvenience, where possible please return the product
to the point of purchase for an exchange,
If the product develops a fault due to defects in materials or manufacture
after 12 months from the date of purchase, and within the guarantee
period, Conair UK After Sales Service will repair or replace the product.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group
Ltd will not be liable to repair or replace your product where:
1.) The appliance has been used on a voltage supply other than that
which is marked on the product, or advised within this instruction
booklet
2.) The appliance has been purchased from an unauthorised stockist*
3.) The appliance is used for professional / non domestic usage
4.) Repairs or alterations have been attempted by unauthorised persons
5.) The failure of the appliance is a direct result of misuse
6.) The failure is a result of not following the instructions for use
This guarantee does not cover any cosmetic damage due to misuse
of the product nor any damage to persons or property that occurs
7471U IB-17/206.indd 10 5/18/17 10:43 AM
Page 11
because of product misuse.
*unauthorised stockists include, but are not limited to online auction
sites, private sellers and those selling second hand goods, refurbished
products etc
Please contact the Conair Customer Care Line on 03705 133 191
(09:00 to 17:00 Monday to Friday) or e-mail ukinfo@conair.com for
further information on authorised stockists.
It is important to retain your proof of purchase. We recommend
attaching your receipt to this page.
Even where a refund may be applicable, no refund will be provided
without a valid receipt or proof of purchase, we will only be able
to offer a repair or replacement service. Please note this does
not apply if the product was purchased directly from The Conair
Group Ltd.
Guarantees on replacement products run from the original purchase
date or date of delivery, whichever is later, and not from the date of
replacement.
This guarantee is an additional benefit and does not affect your
statutory rights as a consumer.
If you have any queries regarding this guarantee please contact the
Conair Customer Care Line on 03705 133 191 (09:00 to 17:00 Monday
to Friday) or e-mail ukinfo@conair.com
7471U IB-17/206.indd 11 5/18/17 10:43 AM
Page 12
UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 03705 133191 (09:00 to 17:00 Monday to Friday) or email
your enquiry to ukinfo@conair.com.
If you should need to return your appliance to us please send it to the
following address:
Customer Care Centre
Conair Logistics
Unit 4
Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your name and address, together with a copy of proof
of purchase and details of the fault.
Please note this Instruction Booklet is not the guarantee.
IB-17/206
7471U IB-17/206.indd 12 5/18/17 10:43 AM
Loading...