Babyliss ST95E, i pro 230 steam User guide

Page 1
1
Page 2
2
+
-
pro 230 steam
ionic t itanium
230° 215° 200° 185° 170° ionic
1
2
3
4
5
6
7
8
9
Page 3
7
i pro 230 steam straightener
The BaByliss i pro 230 steam straightener is a very high temperature straightener that has been specially studied and designed to straighten all hair types perfectly in just one stroke.
BaByliss selected steam because of the benets it oers hair
The steam function gently relaxes
the hair bre. Hair is uniformly
and perfectly untangled and straightened from the roots to the tips. The steam in combination with the Ionic function (negative ions emitted by a high output ion generator are diused on the hair during straightening to reduce
frizz and static electricity) also
makes hair softer and shinier. It ensures it is rehydrated. Finally, the steam guarantees longer lasting straightening compared to ordinary straigh­tening.
The straightener heating pla­tes have a new Ceramic and Ti­tanium micro-particle coating. Thanks to this technology, the plates are smoother and they guarantee perfect glide to respect your hair even more.
Finally, your straightener integrates a state-of-the-art self-regulating heating element, Advanced
Ceramic Technology™, that allows precise and continuous electronic control of the temperature. The ACT™ means the unit heats up instantly, attains a very high temperature, maintains the temperature to the nearest degree and has very quick reaction and recovery capacity.
GENERAL FEATURES
1. On/O switch – Automatic
switch o
2. 5-position temperature selectors, 170°C to 230°C
3. Blue LED – Ionic function
4. Water reservoir
5. Steam function switch – 3 positions – no steam/normal/ high
6. Plates (w 38mm x l 85mm)
with nano Ceramic Titanium coating
7. Retractable untangling comb – 3 positions – no comb/medium comb for ne hair and smaller locks of hair/long comb for thick hair and larger locks of hair
8. Swivel cord
9. Multi-layered heat-resistant
insulating mat
USE
BEFORE PLUGGING IN THE STRAIGHTENER!
• ll the water reservoir with
water,
• check that the reservoir is
properly positioned and
closed,
ENGLISH
Page 4
8
• check that your hands and the
outside of the reservoir are dried well.
If the reservoir is full, you can
use the steam function about
50 times. If you have to ll the reservoir a second time,
unplug the unit and replace the reservoir immediately after
lling it making sure you don’t
touch the hot plates.
Let the unit heat up for at least 2-3 minutes before using the steam function. Avoid any contact between the hot surfaces and your face or
neck. Make sure you don’t direct the steam at your face or neck.
• Prepare your hair for straigh-
tening: wash your hair and untangle using a big tooth comb and then dry using a hairdryer.
• Divide your hair into sections. Pin
the upper sections with clips to work with the hair underneath.
• Remove the little reservoir (4)
located at the top of the unit and ll it with water, preferably distilled (rst lift the little black rubber button). Then put the reservoir back on the straightener.
• Plug the BaByliss i pro 230 steam
straightener in and press the ON/OFF (1) button. Wait a few minutes until the straightener has heated up.
The rst time you use the unit, you might notice a little smoke and a particular odour: this is common and will disappear the next time you use the unit. You will also notice that the unit sputters slightly, this sound is normal for a high output ion generator.
• A green LED will light up, an
indicator light for the lowest temperature, the blue LED (3) indicates your straightener’s ionic function.
• Select the desired temperature
using the temperature selectors (2). A lower temperature is generally recommended for ne, bleached and/or damaged hair, and a higher temperature for curly, thick and/or dicult to style hair.
Since every hair type is unique,
we recommend you use position 1 (green LED) the rst time you
use it. Progressively increase the
temperature, if necessary, during
the following uses. Use the table
below as a guide:
The LED of the selected temperature blinks until the temperature is reached, then it remains lighted during the whole using time.
Page 5
9
USING WITH STEAM
Switch the steam function on (5). Select the desired output
according to your hair type. Also use the untangling comb (7) which will let you spread your hair evenly between the teeth of the comb and to untangle your
hair with ease. Select the desired
height beforehand.
On rst use, or if the unit has not been used for a while, start up the steam function by closing and opening the unit 7 to 8 times (a pumping action).
Straighten your hair from root to tip. A single stroke is enough! Your hair is straightened impeccably! It is
shiny and silky and stays straight for a very long time.
USING WITHOUT STEAM
The straightener can also be used without steam, all you need to do is slide the switch into the ‘no steam’ position or use it with an empty reservoir.
Furthermore, to perfect and set hair you have straightened and that is more dicult to manage, or that is stray, etc., start with one stroke with steam then a second without steam.
Tips and techniques to straighten your hair
• Take up a section of hair about 2
to 3cm wide and place it between the 2 heating plates, near the roots of the hair.
• Press the straightener handles,
grip it tightly to hold the hair and slide it slowly from roots to tips. Repeat if necessary, then release the pressure on the straightener.
• Take up another section of hair
and continue until all your hair has been straightened.
TEMPERATURES HAIR TYPES
STEAM OUTPUT
170°C green LED
185°C yellow LED
Fragile hair: ne, dry,
bleached, damaged and/or
frizzy
Wavy hair
High
High
185°C yellow LED 200°C orange LED
Normal or coloured hair
Wavy to loosely curly hair
High
Medium
200°C orange LED
215°C red LED 230°C red LED
Thick hair
Curly to very curly hair
Medium Medium
Page 6
10
Note! During straightening, it is possible that the unit will smoke a little. This could be because of evaporation of the sebum or the remainder of hair products (leave-in care, hairspray, etc.) or the dampness of the hair.
• Styling your hair for the nal touch. Set the straightening
using a light mist of hairspray or a little mousse, but certainly don’t brush your hair.
Technique to shape your hair
The BaByliss i pro 230 steam straightener can also be used to accent certain sections of hair (fringe, hair turned in or out, etc.).
• To shape hair with the tips turned
under, use as described above but turn the unit inward (like you would a brush during blow
drying). Hold in place for a few
seconds then release.
• For hair that turns out at the tips,
use the same movement but in the other direction.
• After use, press the ON/OFF
button and unplug the unit.
• Allow the hot unit to cool on the
heat-resistant mat provided.
MAINTENANCE
• Unplug the unit and allow to cool
completely.
• Make sure you empty the reservoir
after every use.
• Clean the plates using a soft,
damp cloth, without detergent, to preserve the optimal quality of the plates. Do not scratch the plates.
• Store the straightener with
the plates pressed together to protect them.
• It is preferable to use distilled
water to ll the reservoir. Otherwise, take care to descale the unit from time to time.
Page 7
71
Page 8
72
Loading...