Babyliss 5162CU User Manual

Model 5162CU

ROSE QUARTZ 2100

The BaByliss Rose Quartz 2100 dryer has a professional long-life AC
motor with 2100W to give a powerful airow for fast drying results.
Quartz-Ceramic technology combined with the active ionic conditioning
system gives salon smoothness and a frizz-free shiny nish.

FEATURES

• 2100W

• AC motor for fast drying results

• 3 heat / 2 speed settings plus cold shot

• Quartz-Ceramic technology

• Ionic conditioning for a frizz-free nish

• Slim concentrator nozzle

• Removable rear lter for easy cleaning

• Hanging loop for tidy storage

• 2.2m length cord

• 5 year guarantee

SAFETY CAUTIONS

• This appliance should only be used as described within
this instruction booklet. Please retain for reference.

IMPORTANT CHILD SAFETY
WARNING! Polythene bags over product or package

may be dangerous. To avoid danger of suffocation, keep
this wrapper away from babies and children. This bag is
not a toy.

WARNING! THIS APPLIANCE GETS HOT!

• ALWAYS keep out of reach of children (during and after
use and whilst cooling).

• This appliance should not be used, cleaned or
maintained by children.

• Always take extra care if used on children or near
children.

• Do not use on very young children.

IMPORTANT SAFETY

• UK Only: This appliance must not be used in the
bathroom. If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous
even if the appliance is switched off. For additional
protection the installation of a residual current device
(RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.

WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.

• Do not use this appliance in the bathroom.

• Do not immerse the appliance into water or other
liquids.

• Never look directly into the barrel of the hairdryer when
it is switched on.

• Always inspect the appliance before use for
noticeable signs of damage. Do not use if damaged
or if the appliance has been dropped. In the event
of the appliance being damaged, discontinue use

immediately and and contact the Conair Customer
Care Line (refer to ‘UK After Sales Service’ section for
further information).

• Do not use the appliance if the lead is damaged. In the
event of the appliance being damaged, discontinue
use immediately and contact the Conair Customer
Care Line (refer to ‘UK After Sales Service’ section for
further information).

• Do not leave the appliance unattended when switched
on or plugged in.

• This unit is equipped with a safety thermostat. In the
event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should
this happen, switch the dryer to the ‘‘0’’ position,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear lter is clear of hair and other debris.
Plug in and switch on. If the appliance continues to
overheat discontinue use immediately, switch off and
unplug and contact the Conair Customer Care Line
(refer to ‘UK After Sales Service’ section for further
information).

• Take care that the air vents do not become blocked
when in use. Ensure the rear lter is clear of hair and
other debris before use.

• Do not place the appliance on any heat sensitive
surface whilst in operation.

• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular

the ears, eyes, face and neck.

• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.

• Allow appliance to cool before storing away.

• After use do not coil the lead around the appliance as
this may cause damage to the lead. Instead coil the
lead loosely by the side of the appliance.

• This appliance complies with the requirements
of Directives 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Electrical Safety of
Domestic Appliances).

Ionic Technology

Many aspects of modern living, including air conditioning contact with
man-made bres and air pollution contribute to a build-up of static
electricity in the hair. Even brushing and towel drying the hair can
increase these levels, causing the surface of the cuticle to become
rough. Consequently, hair may have a dull appearance. High levels of
static charge cause hair to become “y-away” and difcult to style.
The ion generator produces a stream of negative ions which act to
neutralise the static charge, smoothing the cuticle for shiny, smooth
and manageable hair.

INSTRUCTIONS FOR USE
General

• Towel dry and detangle hair.

• Plug the hairdryer into a suitable mains socket.

• Select the required heat and speed settings.

• After use, switch off and unplug the hairdryer.

• Allow to cool before storing away.

IMPORTANT! Always keep the rear of the hairdryer away from the hair
during use, to prevent it being drawn in through the rear air lter.

Heat and Speed Settings

There are 3 heat and 2 speed settings plus the cold shot button. Use
the higher heat and higher speed settings for initial drying and use the
lower heat and lower speed settings for styling and scrunch drying as
the hair begins to dry.

Cold Shot Button

Use the cold shot button on warm hair to rapidly cool the hair and set
the style in place for a long-lasting effect.

Slim Concentrator Nozzle

Use the concentrator nozzle to direct the airow where you want it and
to make styling easier. When using the concentrator nozzle use a low
heat and speed setting.

STYLING TIPS
Body and Volume

To help create extra body and volume in the hair, lean forward so the
head is upside down when drying. Direct the airow towards the roots
for maximum lift. When the hair is dry, brush back into required style.

Straightening

To create a smooth straight look, rst divide the hair into sections.
Attach the concentrator nozzle, then using a brush, hold the hair taut
and roll the ends under slightly whilst drying.

Making Waves

To create tousled natural-looking waves, position the head upside
down. Using the dryer without the nozzle, grasp the hair at the roots
and scrunch between ngertips whilst drying. When the hair is dry,
style into position for a casual, natural look.

CLEANING & MAINTENANCE

To keep your dryer in the best possible condition, please follow the
steps below:

General

• Do not wrap the lead around the dryer, instead coil the lead loosely

by the side of the dryer.

• Do not use the dryer at a stretch from the power point.

• Always unplug after use.

Cleaning the Filter

• Ensure the appliance is switched off, unplugged and cool.

• Holding the handle of the appliance rmly, twist the rear lter to the

left to remove.

• Using a soft brush, clean any hair and other debris from the lter.

• Replace the rear lter by aligning the grooves and turning to the right

until the lter clicks back in to place.

• To clean the outside of the dryer, wipe with a damp cloth. Make sure

no water enters the dryer and it is completely dry before use.

UK GUARANTEE

This BaByliss appliance is guaranteed for consumer use for 5 years.

This guarantee covers defects under normal use from date of
purchase and ceases to be valid in the event of alteration or repairs by
unauthorised persons. If the appliance does not perform satisfactorily
due to defects in materials or manufacture, it will be repaired or replaced
through Conair UK After Sales Service. The Conair Group Ltd reserves
the right to amend terms and specications without prior notice.

This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE

For further advice on using the appliance or should you need to return
your product, please contact the Conair Customer Care Line on
0370 5 133191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry
to [e-mail].

The return address is:

Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW

Please enclose your returns number, name and address details,
together with a copy of proof of purchase and details of the fault.

SAFE DISPOSAL

The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be
handed to an appropriate collection point for the recycling of Electrical
and Electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your
local council ofce or your household waste disposal service.

UK WIRING INSTRUCTIONS

The wires in the mains lead are coloured in accordance with the
following code:

BLUE = NEUTRAL
BROWN = LIVE

As the colours of the wire in the mains lead of this appliance may not
correspond with the colour marking identifying the terminals on your
plug, proceed as follows:

• The wire which is coloured BLUE must be connected to the terminal

which is marked with the letter N.

• The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L.

• Neither the BLUE nor BROWN wires should be connected to the

terminal which is marked with the letter E or the

symbol.

This appliance is supplied tted with a BS1363 mains plug and a
BS1362 13A fuse. If this plug is removed please ensure it is disposed
of safely as a disconnected plug is dangerous if connected to the
mains. If any other type of plug is used, a 13A fuse must be tted.