BaByliss 2775U Instruction Manual

Model 2775U

BIG HAIR

BIG HAIR

The BaByliss Big Hair air styler is perfect for adding gorgeous volume
and shine to styles. The large ceramic barrel gives fullness and body as
you style whilst the soft bristles create ultimate shine and smoothness.

FEATURES

• 700W

• 50mm ceramic barrel with soft brush bristles

• High shine ionic conditioning

• 2 heats plus a cool setting

• 2 rotation speeds for total control

• Multi-directional brush

• Hinged rear lter

• Protective cover

• 2.5m longer length cord

• 3 year guarantee

SAFETY CAUTIONS

• This appliance should only be used as described within
this instruction booklet. Please retain for reference.

WARNING! Polythene bags over product or packaging

may be dangerous. To avoid danger of suffocation, keep
wrapper away from babies and children. These bags are
not toys.

• UK Only: This appliance must not be used in the
bathroom. If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous

even if the appliance is switched off. For additional
protection the installation of a residual current device
(RCD) with a rated residual operating current not

exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.

WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.

• Do not use this appliance in the bathroom.

• Do not immerse the appliance in water or other liquids.

• Always inspect the appliance before use for noticeable

signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage
contact the Conair Customer Care Line (refer to ‘UK

After Sales Service’ section for further information).

• Do not use the appliance if the lead is damaged. In

the event of damage contact the Conair Customer

Care Line (refer to ‘UK After Sales Service’ section for

further information).

• Do not leave the appliance unattended when switched

on or plugged in.

• This appliance is equipped with a safety thermostat.

In the event of overheating the appliance will stop

automatically. Should this happen, push the speed
switch on the handle to the “0” position to switch off,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear lter is clear of hair and other debris.
Plug in and switch on. If the appliance continues to

overheat discontinue use immediately, switch off and
unplug. Contact the Conair Customer Care Line (refer

to the ‘UK After Sales Service’ section for further

information).