Bürkert Type 6013 Operating Instructions
Type 6013
Magnetventil
2/2-Way Solenoid Valve 2/2-Wege Magnetventil Électrovanne à 2/2 voies
Address / Adresse
Germany / Deutschland / Allemagne
Bürkert Fluid Control Systems Sales Center Christian-Bürkert-Str. 13-17 D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111 Fax + 49 (0) 7940 - 10 91 448 E-mail: info@de.buerkert.com
International
www.burkert.com → Bürkert → Company → Locations
Manuals and data sheets on the Internet: www.burkert.com
Bedienungsanleitungen und Datenblätter im Internet: www.buerkert.de
Manuel d'utilisation et fiches techniques sur Internet : www.buerkert.fr
Operating Instructions
Bedienungsanleitung
Manuel d‘utilisation
1OPERATING INSTRUCTIONS
The operating instructions contain important information.
Read the instructions carefully and follow the safety instructions in particular, and also observe the operating conditions.
Instructions must be available to each user.
The liability and warranty for Type 6013 are void if the operating instructions are not followed.
1.1 Symbols
Designates an instruction to prevent risks. →→designates a procedure which you must carry out.
Warning of injuries:
DANGER!
Imminent danger! Serious or fatal injuries.
WARNING!
Potential danger! Serious or fatal injuries.
CAUTION!
Danger! Minor or moderately severe injuries.
Warns of damage to property:
NOTE!
© Bürkert Werke GmbH & Co. KG, 201 - 2017
Operating Instructions 1706/ _(8 (1_008 / Original DE
2INTENDED USE
Incorrect use of the solenoid valve Type 6013 can be dangerous to people, nearby equipment and the environment.
The device is designed for blocking, dosing, filling and venting neutral gaseous and liquid media.
In the potentially explosion-risk area the device may be used only according to the specification on the separate Ex type label. For use observe the additional information enclosed with the device together with safety instructions for the explosion-risk area.
Devices without a separate Ex type label may not be used in a potentially explosive area.
Use according to the permitted data, operating conditions and conditions of use specified in the contract documents and operating instructions.
The device may be used only in conjunction with third-party devices and components recommended and authorised by Bürkert.
Correct transportation, correct storage and installation and careful use and maintenance are essential for reliable and problem-free operation.
Use the device only as intended.
2 |
english |
|
|
|
|
2.1 Restrictions
If exporting the system/device, observe any existing restrictions.
2.2 Definition of term
In these operating instructions, the term “device” always refers to the solenoid valve Type 6013.
3BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any contingencies and events which may arise during installation, operation and maintenance.
Danger – high pressure!
Before loosening the lines and valves, turn off the pressure and vent the lines.
Risk of electric shock!
Before reaching into the system, switch off the power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations for electrical equipment!
Risk of burns/risk of fire!
During continuous operation the surface of the device may become hot.
Keep the device away from highly flammable substances and media and do not touch the device with bare hands.
Do not obstruct the heat release required for operation.
|
english |
3 |
|
|
|
Destruction of the coil by overheating!
Connect the coil electrically only when the housing has been installed. In the case of AC voltage pay attention to movable core.
To prevent injury, ensure that:
Do not supply the medium connectors of the system with aggressive or flammable mediums.
Do not make any external modifications to the device bodies. Ensure that the system cannot be activated unintentionally.
Installation and repair work may be carried out by authorized technicians only and with the appropriate tools.
After an interruption in the power supply or pneumatic supply, ensure that the process is restarted in a defined or controlled manner.
Do not put any loads on the body.
Observe the general regulations of technology.
Type 6013
4 TECHNICAL DATA
4.1 Conformity
In accordance with the EC Declaration of conformity, the solenoid valve Type 6013 is compliant with the EC Directives (if applicable).
4.2 Standards
The applied standards, which verify conformity with the EC Directives, can be found on the EC-Type Examination Certificate and / or the EC Declaration of Conformity (if applicable).
4.3 Operating conditions
WARNING!
Heat sources and temperature fluctuations may cause malfunctions or leaks!
If the device is used outdoors, do not expose it unprotected to the weather conditions.
Avoid heat sources which may cause the allowable temperature range to be exceeded.
4 |
english |
|
|
|
|
Medium temperature:
Operating |
Sealing material |
Medium temperature |
|
principles |
|
|
|
|
|
|
|
CFA |
FKM |
-10 ... +100 °C (PA Coil) |
|
|
|
-10 ... +120 |
°C (Epoxide Coil) |
|
|
|
|
|
PTFE/Graphite |
-10 ... +180 |
°C |
|
|
|
|
CFB |
FKM |
-10 ... +100 |
°C (AC) |
|
|
-10 ... +120 |
°C (DC) |
|
|
|
|
Ambient temperature: |
-10 ... +55 °C |
Viscosity: |
21 mm/s |
Protection class: |
IP65 in accordance with EN 60529 with |
|
cable plug |
Media: |
neutral gaseous and liquid media, which do not attack |
|
|
body and sealing materials (see table of resistance under |
|
|
www.burkert.com) |
|
|
|
|
|
Check resistance in individual cases |
|
4.4 Fluidic data
Operating principle
A |
|
|
|
|
|
|
|
2 (A) |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
2/2-way valve, normally closed |
|
(NC) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 (P) |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B |
|
|
|
|
|
|
|
2 (B) |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
2/2-way valve, normally open |
|
(NO) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 (P) |
|
|||||
|
|
|
|
|
|
|
|
|
|||||
Pressure range: |
see type label |
Line connectors: |
Type 6013: G1/8, G1/4, G3/8, Flange |
|
Type 6013A: G1/8, G1/4 |
Note the information specified on the type label for voltage, type of current, and pressure.
4.5 Type label (example)
Body material Sealing material
Orifice Circuit function
Type
|
<![if ! IE]> <![endif]>inMadeGermany |
6013 |
A 2,0 |
FKM MS |
|
||||
|
00450000 |
WXXXX |
||
|
|
G1/8 |
PN 0-10 bar |
|
|
|
24V |
50Hz |
7W |
|
|
|
|
|
|
|
|
|
|
Ident. no.
if applicable Voltage, Frequency, Output Nominal connection pressure
english |
5 |
|
|
4.6 Electrical data
Connections: |
DIN EN 175301-803 Form A |
|
|
for cable plug Type 2508 |
|
Supply voltage: |
Type 6013: 24 V DC ± 10 % |
|
|
max. residual ripple 10 % |
|
|
24 V / 50 Hz |
|
|
230 V / 50 Hz |
|
|
Type 6013A: 24 V DC ± 10 % |
|
|
max. residual ripple 10 % |
|
|
230 V / 50 Hz |
|
Voltage tolerance: |
± 10 % |
|
Nominal output: |
CFA: 8 W (5 W, 10 W) |
|
|
CFB |
AC: 7 W (9 W) |
|
|
DC: 8 W |
|
Impulse version DC: 7 W |
|
Nominal operating mode: |
100 % continuous operation |
|
|
|
for block installation: |
|
|
5 W continuous operation |
|
|
on request a. A. |
|
|
8 W intermittent operation 60 % |
|
|
(30 min) |
6 |
english |
|
|
|
|
Loading...