1
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
AW-NM333
IEEE 802.11 1X1 b/g/n Wireless LAN Module
Datasheet
Rev. 07
B01
CUSTOMER APPROVED SIGNATURE
AZUREWAVE APPROVED SIGNATURE
Confirm
Approve
in whole or in part without prior written permission of AzureWave.
2
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
Silkscreen
information
Revision History
Revision
Date Description Initials Approved
Ver 0.1 2017/11/16 Draft version Grace Liu Daniel Lee
1.
Ver 0.2 2017/11/22
Modify 1.4 Specifications Table
2.
Modify 2.2 Pin Table
Grace Liu Daniel Lee
Ver 0.3 2018/01/19 Update RF spec Grace Liu Daniel Lee
Ver 0.4 2018/01/25 Add description under 2.2 Pin Table Grace Liu Daniel Lee
Ver 0.5 2018/01/29
1. Remove WLAN VID/PID, WLAN SVID/SPID
2.
Add Weight
Rita Lu Josh Lin
Ver 0.6 2018/02/23 Add shipping information Rita Lu Josh Lin
Ver 0.7 2018/04/23
Update RF spec(target output power) Renton Tao N.C Chen
Add label and
Rita Lu Josh Lin
in whole or in part without prior written permission of AzureWave.
3
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
Table of Contents
Revision History .................................................................................................................................. 2
Table of Contents ................................................................................................................................ 3
1.Introduction……………………………………………………………………………………………………………………………………….4
1.1 Product Overview .............................................................................................................................. 4
1.2 Features .............................................................................................................................................. 5
1.2.1 WLAN ....................................................................................................................................... 5
1.4 Specifications Table .............................................................................................................6
1.4.1 General ...................................................................................................................... 7
1.4.2
WLAN ................................................................................................................................................
1.4.3 Operating Conditions ................................................................................................................. 8
7
2. Pin Definition ................................................................................................................................. 8
2.2 Pin Table ........................................................................................................................................... 8
3. Electrical Characteristics ............................................................................................................. 9
3.1 Absolute Maximum Ratings ........................................................................................................... 9
3.2 Recommended Operating Conditions .......................................................................................... 9
3.3 Digital IO Pin DC Characteristics .................................................................................................. 9
3.3.1 1.8V Operation (VIO) ........................................................................................................... 9
3.3.2 3.3V Operation (VIO) ........................................................................................................... 9
4. Mechanical Information ................................................................................................................. 10
4.1 Mechanical Drawing. ....................................................................................................................... 10
5. Shipping information…………………………………………………………….…………………………………………………….. 11
5.1 Tray information………………………………………………………………..…………………..12
5.2 Package information……………………………………………………………………………....12
5.3 The carton label………………………………..…………………………………………………..13
6.Installation guide. ...................................................................................................................... 14
7. Statement ......................................…………………………………………………………….………18
in whole or in part without prior written permission of AzureWave.
4
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
1.
Introduction
1.1 Product Overview
AzureWave Technologies, Inc. introduces the IEEE 802.11b/g/n 1X1 WLAN & Bluetooth module --- AWNM333. The module is targeted to mobile devices including Printers, Notebook, TV, Tablet and Gaming
Device which need small package module, low power consumption and OS support. By using AW-NM333,
the customers can easily enable the Wi-Fi embedded applications with the benefits of high design flexibility,
short development cycle, and quick time-to-market.
Compliance with the IEEE 802.11b/g/n standard, the AW-NM333 uses Direct Sequence Spread Spectrum
(DSSS), Orthogonal Frequency Division Multiplexing (OFDM), DBPSK, DQPSK, CCK and QAM baseband
modulation technologies. A high level of integration and full implementation of the power management
functions specified in the IEEE 802.11 standard minimize the system power requirements by using AWNM333. In addition to the support of WPA/WPA2 and WEP 64-bit and 128-bit encryption, the AW-NM333 also
supports the IEEE 802.11i security standard through the implementation of Advanced Encryption Standard
(AES)/Counter Mode CBC-MAC Protocol (CCMP), Wired Equivalent Privacy (WEP) with Temporal Key
Integrity Protocol (TKIP), Advanced Encryption Standard (AES)/Cipher-Based Message Authentication Code
(CMAC), and WLAN Authentication and Privacy Infrastructure (WAPI) security mechanisms.
AW-NM333 supports SDIO for WLAN to the host processor.
in whole or in part without prior written permission of AzureWave.
5
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
1.2 Featur
es
1.2.1 WLAN
Support 802.11n 1x1 SISO and HT20 operation
IEEE 802.11n compliant with maximum data rates up to 72.2 Mbps (20 MHz channel)
SDIO 2.0 device interface (1-bit SDIO, 4-bit SDIO transfer modes at full clock range up to 50
MHz)
SDIO 2.0 interface for connecting WLAN technologies to the host processor
Multiple power saving modes for low power consumption
Antenna can be switched by RF switch connector
in whole or in part without prior written permission of AzureWave.
6
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
1.4 Specifications Tab
le
Number of
Channels
USA, NORTH AMERICA, Canada and
Taiwan
– 1 ~ 11
China, Australia, Most European Countries
– 1 ~ 13
(Board Level
Limit)
standard
1.4.1 General
Features Description
Product Description
Major Chipset
Host Interface
Dimension
Package
Antenna
1x1 Wireless LAN Module
88W8801
Wi-Fi : SDIO
35mm x 30mm x 3.25mm(max)
Module card with FFC I/F connector
On board PCB antenna/(RF switch connector)
Weight 4 g
1.4.2 WLAN
Features Description
WLAN Standard IEEE 802.11 b/g/n
Frequency Rage 2.4 GHz : 2.412 ~ 2.472 GHz
Modulation DSSS, OFDM, DBPSK, DQPSK, CCK, 16-QAM, 64-QAM
2.4GHz
Output Power
Receiver Sensitivity
*
FCC:381.944mW
802.11b : 1, 2, 5.5, 11Mbps
Data Rate
802.11g : 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n : up to 72.2Mbps-single
WAPI
WEP 64-bit and 128-bit encryption with H/W TKIP processing
Security
WPA/WPA2 (Wi-Fi Protected Access)
AES-CCMP hardware implementation as part of 802.11i security
* If you have any certification questions about output power please contact FAE directly.
in whole or in part without prior written permission of AzureWave.
8
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
1.4.3 Operating Conditions
Features Description
Operating Conditions
Voltage 3.3V
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-40~85 ℃
TBD
-55~125 ℃
20%RH~70%RH
in whole or in part without prior written permission of AzureWave.
8
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
2.
Pin Definition
2.2 Pin Table
Pin No
Definition
Basic Description
Voltage
Type
1
2
3
4
5
PDn*
VIO
GND3
SD_CLK
GND5
0 = full power-down mode
1 = normal mode
1.8V/3.3V SD_VIO Power Supply
Ground
SDIO Clock Input
Ground
I
I
-
I/O
6 SD_DAT[3] SDIO Data line Bit[3] I/O VIO
7 SD_DAT[2] SDIO Data line Bit[2] I/O VIO
8 SD_DAT[1] SDIO Data line Bit[1] I/O VIO
9 SD_DAT[0] SDIO Data line Bit[0] I/O VIO
10 SD_CMD SDIO Command I/O VIO
11 GND Ground - -
Full Power-Down
1.8V/3.3V
1.8V/3.3V
-
VIO
-
12 VCC_33 3.3V Power Supply I 3.3V
13 HOST_WKUP Host Wakeup O 3.3V
*Without internal pull-up resistor
in whole or in part without prior written permission of AzureWave.
3. Electrical
Chara
cterist
i
cs
9
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
3.1 Absolute Maximum Ratings
Symbol
Parameter
Minimum
Typical
Maximum
Unit
VCC_33
VIO
3.3V input
Host I/O power
supply
- 3.3 4.0
- 1.8 2.2
- 3.3 4.0
3.2 Recommended Operating Conditions
Symbol
VCC_33
VIO
Parameter
3.3V power supply
1.8V/3.3V digital I/O
power supply
Minimum
2.97 3.3 3.63
1.62 1.8 1.98
2.97 3.3 3.63
3.3 Digital IO Pin DC Characteristics
3.3.1 1.8V Operation (VIO)
Symbol
V
IH
V
IL
V
OH
Input high voltage 0.7*V18 - V18+0.4
Input low voltage -0.4 - 0.3*V18
Output high voltage V18-0.4 - -
Parameter
Minimum
V
Typical
Maximum
Unit
V
Typical
Maximum
Unit
V
V
OL
Output low voltage - - 0.4
3.3.2 3.3V Operation (VIO)
Symbol
in whole or in part without prior written permission of AzureWave.
V
IH
V
IL
V
OH
V
OL
Input high voltage 0.7*V33 - V33+0.4
Input low voltage -0.4 - 0.3*V33
Output high voltage V33-0.4 - Output low voltage - - 0.4
Parameter
Minimum
Typical
Maximum
Unit
V
4
. Mech
a
nical
Informatio
n
10
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
4.1 Mechanical Drawing
in whole or in part without prior written permission of AzureWave.
5. Ship
ping i
nfor
m
ation
11
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
5.1 Tray information
100pcs/Tray
3 trays/Inner box, total 300pcs
2 inner boxes/Carton, total 600pcs
in whole or in part without prior written permission of AzureWave.
12
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
5.2 Package Information
Rubber Band
Desiccant
Dry pack Bag
in whole or in part without prior written permission of AzureWave.
13
The inform
ation
contain
ed herein is
the exclusive property of AzureWave and sh
all not be dis
tributed,
re
produc
ed, or dis
closed
100
m
m
Vacuum packing
AZ P/N: 2-23330-XXX
Q’ty: 300pcs
1 vacuum package contains 3 trays, totally 300pcs of module.
1 carton contains 2 vacuum packages, totally 600pcs of module.
5.3 The carton label as below.
AzureWave P/N 2-23330-XXX
Customer
Custmer P/N
Descrption
AW-NM333
Q'ty 600 pcs
C/N
N.W. G.W.
in whole or in part without prior written permission of AzureWave.
Installation guide
1. Please use NB & 1 pcs 2.4G AP
2. Test Configuration
3. Open the Terminal after the system is turned on
※※ The next steps are important: ※※
4. select Wi-Fi iconClick Edit and delete wired
14
※※ The next steps are important: ※※
(1) Test Tool (A) connection USB Cable with PC/NB
(2) Test Tool (B) connection USB Cable with PC/NB
(3) Test Tool (A) & Test Tool (B) connection
6. Open Ubuntu,press Ctrl+Alt+T open Terminal
Key in command
7. command
sudo su
password:azwave
chmod 777 * -R
cd /home/azwave/2333/driver/bin_sd8801
./normal_enable.sh //paste command ;LED is flash “blue” color
iwconfig //Check mlan0 Enable , if not please
follow step 8 restart again
15
iwlist mlan0 scan //scan AP ,check have scan TEST2
iwconfig mlan0 essid Cisco2 //join AP
ifconfig mlan0 192.168.0.100 //set Wireless IP
ping 192.168.0.1 //ping AP IP。
8.
Important: During testing or when testing is completed to turn off the EUT, follow these
※※
steps:
Step 1: please NB (2)” Terminal” Close .
Step 2: Will be USB B-type disconnect
Step 3: Key in
./dsable.sh command
9.
OS Shutdown step
Test ok,please choice iconshot down
16
17
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
18
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and
users, and
The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC authorization.
End Product
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in a visible area with the following: “Contains FCC ID: TLZ-
NM333”. The grantee's FCC ID can be used only when all FCC compliance requirements
are met.
Labeling
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Industry Canada statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions: (For
module device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and
users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre
l'antenne et les utilisateurs,
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur
l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable
des essais sur son produit final pour toutes exigences de conformité supplémentaires
requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the Canada authorization is
no longer considered valid and the IC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines
configurations d'ordinateur portable ou de certaines co-localisation avec un autre
émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut
pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé
de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation
distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in a visible area with the following: “Contains IC: 6100A-NM333”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où
l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue
entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible
avec l'inscription suivante: "Contient des IC: 6100A-NM333".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur
final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de
l'utilisateur du produit final qui intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises
et avertissements comme indiqu
é dans ce manuel.
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或
使用者均不得擅自變更頻率、加大功率或變更原設計之特性及
功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經
發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續
使用。
前項合法通信，指依電信法規定作業之無線電通信。 低功率
射頻電機須忍受合法通信或工業、科學及醫療用電波輻 射性
電機設備之干擾。
1.
本模組於取得認證後將依規定於模組本體標示審驗合格標籤。
2.
系統廠商應於平台上標示「本產品內含射頻模組：
XXXyyyLPDzzzz-x
」字樣。
Loading...